v15i024: Filter to eliminate file inclusion commands
Rich Salz
rsalz at uunet.uu.net
Wed Jun 1 06:15:27 AEST 1988
Submitted-by: Sten Folkerman <sten at enea.se>
Posting-number: Volume 15, Issue 24
Archive-name: inc-elim
[ This is a general filter to remove "include" commands from files.
It can process ".so" commands for *roff, "#include" commands for
C, etc. It understands ~name and | for piped commands.
The Makefile will cause problems for folks without the SystemV
"augmented make", so use the Make.Alt that I wrote.
The manual page uses the "C" font; if you don't have it
you might need to do some tweaking -- check out all \f
commands.
-r$ ]
#! /bin/sh
# This is a shell archive. Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file". To overwrite existing
# files, type "sh file -c". You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g.. If this archive is complete, you
# will see the following message at the end:
# "End of shell archive."
# Contents: Make.alt Makefile file1 file2 inc-elim inelim.1net
# inelim.c unenv.c
# Wrapped by rsalz at fig.bbn.com on Tue May 31 16:14:00 1988
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'Make.alt' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'Make.alt'\"
else
echo shar: Extracting \"'Make.alt'\" \(737 characters\)
sed "s/^X//" >'Make.alt' <<'END_OF_FILE'
X# Makefile for inelim
X
X
BINDIR= /usr/local/bin
X
SYSTEM=BSD
CFLAGS = -O -D$(SYSTEM)
X
COMMAND= inelim
SRCS= inelim.c unenv.c
OBJS= inelim.o unenv.o
MANPAGE= inelim.1net
X
X
trap: btest
X
btest: inelim
X ./inelim file1
X ./inelim -v file1
X ./inelim -p .so file1
X ./inelim file1 | ./inelim -p source
X
install: $(BINDIR)/$(COMMAND)
X
X$(BINDIR)/$(COMMAND): $(COMMAND)
X cp $(COMMAND) $@
X chmod 755 $@
X
bsd:
X $(MAKE) $(COMMAND) SYSTEM=BSD
X
att:
X $(MAKE) $(COMMAND) SYSTEM=SYSV
X
X$(COMMAND): $(OBJS)
X $(CC) $(LDFLAGS) -o $@ $(OBJS)
X
lint:
X $(LINT) -D$(SYSTEM) $(LFLAGS) $(SRCS)
X
clean:
X rm -f $(OBJS)
X
rogshar:
X shar -c -f inelim.shar $(MANPAGE) Makefile $(SRCS) file1 file2
X
gosshar:
X shar -c $(MANPAGE) Makefile $(SRCS) file1 file2 > incelim.shar
END_OF_FILE
if test 737 -ne `wc -c <'Make.alt'`; then
echo shar: \"'Make.alt'\" unpacked with wrong size!
fi
# end of 'Make.alt'
fi
if test -f 'Makefile' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'Makefile'\"
else
echo shar: Extracting \"'Makefile'\" \(794 characters\)
sed "s/^X//" >'Makefile' <<'END_OF_FILE'
X# Makefile for inelim
X
BINDIR= /usr/local/bin
X
X.SUFFIXES:
X.SUFFIXES: .none
X
SYSTEM=BSD
CFLAGS = -O -D$(SYSTEM)
X
COMMAND= inelim
SRCS= inelim.c unenv.c
MANPAGE= inelim.1net
X
OBJS= $(SRCS:.c=.o)
X
trap: btest
X
btest: inelim
X ./inelim file1
X ./inelim -v file1
X ./inelim -p .so file1
X ./inelim file1 | ./inelim -p source
X
install: $(BINDIR)/$(COMMAND)
X
X$(BINDIR)/$(COMMAND): $$(@F)
X cp $(@F) $@
X chmod 755 $@
X
bsd:
X $(MAKE) $(COMMAND) SYSTEM=BSD
X
att:
X $(MAKE) $(COMMAND) SYSTEM=SYSV
X
X$(COMMAND): $(OBJS)
X $(CC) $(LDFLAGS) -o $@ $(OBJS)
X
X$(OBJS): $$*.c
X $(CC) $(CFLAGS) -c $*.c
X
lint:
X $(LINT) -D$(SYSTEM) $(LFLAGS) $(SRCS)
X
clean:
X rm -f $(OBJS)
X
rogshar:
X shar -c -f inelim.shar $(MANPAGE) Makefile $(SRCS) file1 file2
X
gosshar:
X shar -c $(MANPAGE) Makefile $(SRCS) file1 file2 > incelim.shar
END_OF_FILE
if test 794 -ne `wc -c <'Makefile'`; then
echo shar: \"'Makefile'\" unpacked with wrong size!
fi
# end of 'Makefile'
fi
if test -f 'file1' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'file1'\"
else
echo shar: Extracting \"'file1'\" \(121 characters\)
sed "s/^X//" >'file1' <<'END_OF_FILE'
knatte
include file2
X.so file2
include $HOME/.cshrc
tjatte
include | awk 'BEGIN{FS=":"}{print $1}' /etc/passwd | fmt
end
END_OF_FILE
if test 121 -ne `wc -c <'file1'`; then
echo shar: \"'file1'\" unpacked with wrong size!
fi
# end of 'file1'
fi
if test -f 'file2' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'file2'\"
else
echo shar: Extracting \"'file2'\" \(7 characters\)
sed "s/^X//" >'file2' <<'END_OF_FILE'
fnatte
END_OF_FILE
if test 7 -ne `wc -c <'file2'`; then
echo shar: \"'file2'\" unpacked with wrong size!
fi
# end of 'file2'
fi
if test -f 'inc-elim' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'inc-elim'\"
else
echo shar: Extracting \"'inc-elim'\" \(705 characters\)
sed "s/^X//" >'inc-elim' <<'END_OF_FILE'
XFrom enea!sten at uunet.uu.net Mon Feb 29 03:03:05 1988
Received: from BBN.COM (bbn.com.ARPA) by pineapple.bbn.com id AA12423; Mon, 29 Feb 88 02:56:24 est
Received: from uunet.uu.net by BBN.COM id aa22315; 29 Feb 88 2:55 EST
Received: from enea.UUCP by uunet.UU.NET (5.54/1.14) with UUCP
X id AA22935; Mon, 29 Feb 88 01:48:53 EST
Received: by enea.se (5.57++/1.19)
X id AA12730; Mon, 29 Feb 88 00:59:08 +0100 (MET)
Date: Mon, 29 Feb 88 00:59:08 +0100
XFrom: Sten Folkerman <sten at enea.se>
Message-Id: <8802282359.AA12730 at enea.se>
To: comp-sources-unix at enea.se
Status: R
X
writting ./inelim.1net
writting ./Makefile
writting ./inelim.c
writting ./unenv.c
writting ./file1
writting ./file2
XFinished archive 1 of 1
END_OF_FILE
if test 705 -ne `wc -c <'inc-elim'`; then
echo shar: \"'inc-elim'\" unpacked with wrong size!
fi
# end of 'inc-elim'
fi
if test -f 'inelim.1net' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'inelim.1net'\"
else
echo shar: Extracting \"'inelim.1net'\" \(1571 characters\)
sed "s/^X//" >'inelim.1net' <<'END_OF_FILE'
X.de r$
X.ds rV \\$3
X.ds rD \\$4
X..
X.r$ $Header: inelim.1net,v 1.3 1988-02-23 16:00:12 sten Exp $
X.TH INELIM 1net "ENEA DATA \*(rD"
X.ds TD \fCinelim\fR
X.SH NAME
inelim \- eliminate include statements
X.SH SYNOPSIS
X.B inelim
X[
X.B \-v
X] [
X.BI \-p pattern
X] [
X.I files
X]
X.SH DESCRIPTION
X\*(TD reads the specified files or the standard input and performs the
implied textual inclusion. The include statement has as default the format:
X.PP
X\fCinclude \fIsomefile\fR
X.PP
when they appear in beginning of input lines. Before \fIsomefile\fR is
accessed, the file name will go through tilde and environment substitution,
in a manner like \fCcsh(1)\fR. If the file name does not begin with '/',
the include file is opened relative to the directory location of the current
file. If the file name begins with '|', the rest of the line is fed to
X\fCsh(1)\fR, and data from stdout is substituted in place of the include
line. If The file name is just '-', the stdin will be read for data to
substitute the inclusion line with.
X.PP
The command line options are:
X.TP 2c
X.BI \-p pattern
X.I pattern
will be used instead of \fCinclude\fR to detect include statements.
Subsequent whitespace is skipped and the rest of the line is taken as the
name of the file to include.
X.TP
X.B \-v
verbose operation. Each line on the standard output is preceded by the input
file name and line number.
X.SH ENVIRONMENT
All environment variables may be substituted into an inclusion file name.
X.SH "SEE ALSO"
X\fCsh(1)\fR and \fCcsh(1)\fR
X.SH AUTHOR
Sten Folkerman (sten at enea)
X.SH BUGS
No support for quotes.
END_OF_FILE
if test 1571 -ne `wc -c <'inelim.1net'`; then
echo shar: \"'inelim.1net'\" unpacked with wrong size!
fi
# end of 'inelim.1net'
fi
if test -f 'inelim.c' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'inelim.c'\"
else
echo shar: Extracting \"'inelim.c'\" \(6571 characters\)
sed "s/^X//" >'inelim.c' <<'END_OF_FILE'
X#ifndef lint
static char *RCSid = "$Header: inelim.c,v 1.5 1988-02-29 00:39:38 sten Exp $";
X#endif
X
X/*****************************************************************************\
X* *
X* NAME *
X* inelim - eliminate include statements *
X* *
X* SYNOPSIS *
X* inelim [-v] [-p pattern] [files] *
X* *
X* DESCRIPTION *
X* inelim eliminate include statements by substituting the line with the *
X* include statement with the contents of then file to be included. The *
X* result is written to stdout. The -v option prints file namn and line *
X* number at the beginning of each line. The -p option allows you to *
X* specify an alternative pattern instead of the standard 'include'. If no *
X* files are given, stdin is taken. Tilde and environment substitution is *
X* performed on each include file name. If the expanded file name doesn't *
X* begin with a '/', the directory in which we are reading from at the *
X* moment is prefixed. If the first character in the file name is '|', the *
X* rest is fed to "/bin/sh" and data from stdout replaces the include *
X* line. *
X* *
X* AUTHOR *
X* sten at enea *
X* *
X\*****************************************************************************/
X
X/*
X * $Log: inelim.c,v $
X *
X * Revision 1.5 1988-02-29 00:39:38 sten
X * before public release
X *
X * Revision 1.4 1988-02-23 14:54:58 sten
X * incelim => inelim
X *
X * Revision 1.3 1987-03-02 00:41:42 sten
X * inclusion of command stdout.
X *
X * Revision 1.2 1986-10-20 16:40:57 sten
X * released to the Inner Circle
X *
X * Revision 1.1 1986-10-05 23:09:39 sten
X * Initial revision
X */
X
X#include <stdio.h>
X#include <ctype.h>
X#include <assert.h>
X
X#ifdef BSD
X#include <sys/param.h>
X#endif
X#ifdef V7
X#define MAXPATHLEN 256
X#endif
X#ifdef SYSV
X#include <limits.h>
X#define MAXPATHLEN PATH_MAX
X#endif
X
X#ifdef SYSV
X#define rindex strrchr
X#endif
X
X#define LLEN 256
X
extern char *strcat();
extern char *strcpy();
extern FILE *popen();
extern int rindex();
extern void exit();
X
X#define Strcpy (void) strcpy
X#define Strcat (void) strcat
X
X#define INCLUDE "include"
X
char *progname;
int verbose = 0;
char *pattern = INCLUDE;
X
X/******************************************************************\
X* *
X* pipefile: read the file given as parameter and invoke pipefile *
X* recursively on detected include files. *
X* *
X\******************************************************************/
static void
pipefile(cfd, cwd, cfn)
XFILE *cfd;
char *cwd, *cfn;
X{
X int lcnt = 0;
X char iwd[MAXPATHLEN];
X char line[LLEN];
X
X while (fgets(line, LLEN - 1, cfd) != 0)
X {
X lcnt++;
X if (strncmp(line, pattern, strlen(pattern)) != 0)
X {
X if (verbose)
X fprintf(stdout, "%s/%s, line %d: ", cwd, cfn, lcnt);
X fputs(line, stdout);
X } else
X {
X FILE *ifd;
X char *ifn, *p;
X char path[MAXPATHLEN];
X char ppath[MAXPATHLEN];
X
X for (p = line + strlen(pattern); isspace(*p); p++);
X if (untilde(ppath, p) != 0)
X {
X fprintf(stderr, "%s/%s, line %d: %s: %s\n",
X cwd, cfn, lcnt, progname, "Cannot untilde");
X exit(1);
X }
X if (ppath[0] == '|')
X {
X ppath[strlen(ppath) - 1] = '\0';
X for (p = ppath + 1; isspace(*p); p++);
X if ((ifd = popen(p, "r")) == (FILE *) NULL)
X {
X fprintf(stderr, "%s: Cannot popen %s\n", progname, ppath);
X exit(1);
X }
X pipefile(ifd, cwd, ppath);
X (void) pclose(ifd);
X } else
X {
X if ((unenv(path, ppath)) != 0)
X {
X fprintf(stderr, "%s/%s, line %d: %s: %s\n",
X cwd, cfn, lcnt, progname, "Cannot unenv");
X exit(1);
X }
X if (path[0] == '/')
X Strcpy(iwd, path);
X else
X {
X Strcpy(iwd, cwd);
X Strcat(iwd, "/");
X Strcat(iwd, path);
X }
X iwd[strlen(iwd) - 1] = '\0';
X if ((ifd = fopen(iwd, "r")) == (FILE *) NULL)
X {
X fprintf(stderr, "%s: Cannot open %s\n", progname, iwd);
X exit(1);
X }
X ifn = (char *) rindex(iwd, '/');
X *ifn++ = '\0';
X pipefile(ifd, iwd, ifn);
X (void) fclose(ifd);
X }
X }
X }
X}
X
X#ifdef V7
X/**********************************************\
X* *
X* mygetwd retrieves current working directory *
X* *
X\**********************************************/
static void
mygetwd(to)
char *to;
X{
X FILE *pwdfd;
X char *i;
X
X pwdfd = popen ("/bin/pwd\n");
X assert (pwdfd != NULL);
X i = fgets (to, MAXPATHLEN, pwdfd);
X assert (i != NULL);
X pclose (pwdfd);
X to[strlen (to) - 1] = '\0';
X}
X#endif
X/*****************************************\
X* *
X* usage: display correct usage and exit *
X* *
X\*****************************************/
static void
usage()
X{
X fprintf(stderr, "Usage: %s [-v] [-p pattern] [files]\n", progname);
X exit(1);
X}
X
void
main (argc, argv)
int argc;
char *argv[];
X{
X char sw;
X extern int optind;
X extern char *optarg;
X char dir[MAXPATHLEN];
X
X if ((progname = (char *)rindex(argv[0], '/')) == 0)
X progname = argv[0];
X while ((sw = getopt(argc, argv, "vp:")) != (char) EOF)
X switch (sw)
X {
X case 'v':
X verbose++;
X break;
X case 'p':
X pattern = optarg;
X break;
X case '?':
X usage();
X break;
X }
X#ifdef BSD
X (void) getwd(dir);
X#endif
X#ifdef V7
X mygetwd(dir);
X#endif
X#ifdef SYSV
X (void) getcwd(dir, MAXPATHLEN);
X#endif
X if (optind == argc)
X pipefile(stdin, dir, "");
X else
X for (; optind < argc; optind++)
X {
X FILE *fd;
X char *file;
X char path[MAXPATHLEN];
X char ppath[MAXPATHLEN];
X
X if (strcmp(argv[optind], "-") == 0)
X pipefile(stdin, dir, "");
X else
X {
X if (untilde(ppath, argv[optind]) != 0)
X {
X fprintf(stderr, "%s: %s: %s\n",
X progname, "Cannot untilde", argv[optind]);
X exit(1);
X }
X if ((unenv(path, ppath)) != 0)
X {
X fprintf(stderr, "%s: %s: %s\n",
X progname, "Cannot unenv", argv[optind]);
X exit(1);
X }
X if (path[0] == '/')
X Strcpy(dir, path);
X else
X {
X if (dir[strlen(dir) - 1] != '/')
X Strcat(dir, "/");
X Strcat(dir, path);
X }
X if ((fd = fopen(dir, "r")) == (FILE *) NULL)
X {
X fprintf(stderr, "%s: Cannot open %s\n", progname, dir);
X exit(1);
X }
X file = (char *) rindex(dir, '/');
X *file++ = '\0';
X pipefile(fd, dir, file);
X (void) fclose(fd);
X }
X }
X exit(0);
X /* NOTREACHED */
X}
END_OF_FILE
if test 6571 -ne `wc -c <'inelim.c'`; then
echo shar: \"'inelim.c'\" unpacked with wrong size!
fi
# end of 'inelim.c'
fi
if test -f 'unenv.c' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'unenv.c'\"
else
echo shar: Extracting \"'unenv.c'\" \(1692 characters\)
sed "s/^X//" >'unenv.c' <<'END_OF_FILE'
X/* LINTLIBRARY */
X
X#ifndef lint
static char *RCSid = "$Header: unenv.c,v 1.1 1988-02-29 00:41:23 sten Exp $";
X#endif
X
X/*
X * $Log: unenv.c,v $
X *
X * Revision 1.1 1988-02-29 00:41:23 sten
X * Initial revision
X *
X * Revision 1.1 1986-10-20 16:51:22 sten
X * Initial revisi
X */
X
X#include <stdio.h>
X#include <ctype.h>
X#include <pwd.h>
X#define Strcpy (void) strcpy
X#define Strcat (void) strcat
X
X/****************************************\
X* *
X* untilde: perform tilde substitution. *
X* *
X\****************************************/
X
untilde(out, in)
char *out, *in;
X{
X if (in[0] != '~')
X {
X Strcpy(out, in);
X return (0);
X }
X if (isalnum(in[1]))
X {
X char user[80];
X struct passwd *pw, *getpwnam();
X char *p, *pu;
X
X p = in + 1;
X pu = user;
X while (isalnum(*p) || *p == '-')
X *pu++ = *p++;
X *pu = '\0';
X if ((pw = getpwnam(user)) == NULL)
X return (1);
X Strcpy(out, pw->pw_dir);
X Strcat(out, p);
X } else
X {
X char *p;
X
X if ((p = (char *) getenv("HOME")) == (char *) NULL)
X return (1);
X Strcpy(out, p);
X Strcat(out, in + 1);
X }
X return (0);
X}
X
X/*******************************************\
X* *
X* unenv: perform environment substitution *
X* *
X\*******************************************/
X
unenv(out, in)
char *out, *in;
X{
X while (*in != '\0')
X {
X if (*in != '$')
X *out++ = *in++;
X else
X {
X char envar[80];
X char *p;
X
X in++;
X for (p = envar; isalnum(*in);)
X *p++ = *in++;
X *p = '\0';
X if ((p = (char *) getenv(envar)) == (char *) NULL)
X return (1);
X Strcpy(out, p);
X out += strlen(out);
X }
X }
X *out = '\0';
X return (0);
X}
END_OF_FILE
if test 1692 -ne `wc -c <'unenv.c'`; then
echo shar: \"'unenv.c'\" unpacked with wrong size!
fi
# end of 'unenv.c'
fi
echo shar: End of shell archive.
exit 0
--
Please send comp.sources.unix-related mail to rsalz at uunet.uu.net.
More information about the Comp.sources.unix
mailing list