v16i033: Less, a pager that's more than more, Part04/04
Rich Salz
rsalz at uunet.uu.net
Sat Sep 17 04:36:34 AEST 1988
Submitted-by: ctnews!UNIX386!mark
Posting-number: Volume 16, Issue 33
Archive-name: less5/part04
#! /bin/sh
# This is a shell archive.
# Remove anything before this line, then unpack it
# by saving it into a file and typing "sh file".
echo shar: Extracting \"linstall\"
sed "s/^X//" >'linstall' <<'END_OF_FILE'
X#! /bin/sh
X# Installation script for less.
X# This script prompts the operator for various information
X# and constructs a makefile.
X
Xecho "This script will build a makefile for less."
Xecho "If you already have a file called \"makefile\" it will be overwritten."
Xecho "Press RETURN to continue."
Xread ans
X
Xecho "I will ask you some questions about your system."
Xecho "If you do not know the answer to any question,"
Xecho "just press RETURN and I will choose a default for you."
Xecho "Press RETURN now."
Xread ans
X
XECHO=./vecho
Xif [ ! -x $ECHO ]
Xthen
X echo "One moment..."
X cc -o $ECHO vecho.c
X echo ""
Xfi
X
X$ECHO "Most Unix systems are derived from either System V"
X$ECHO "or Berkeley BSD 4.1, 4.2, 4.3, etc."
X$ECHO ""
X$ECHO "Is your system closest to:"
X$ECHO " 1. System V"
X$ECHO " 2. BSD 4.1"
X$ECHO " 3. BSD 4.2 or later"
X$ECHO " 4. Xenix"
X$ECHO "Enter a number, or just RETURN if you don't know: \c"
Xread ans
Xxenix=0
Xcase "X$ans" in
XX1) sys=sys5; sysname="System V" ;;
XX2) sys=bsd; bsd41=1; sysname="BSD 4.1" ;;
XX3) sys=bsd; bsd41=0; sysname="BSD 4.2" ;;
XX4) sys=sys5; xenix=1; sysname="Xenix" ;;
X*) sys=unknown ;;
Xesac
X$ECHO ""
X
XDATE=`date`
Xcat >makefile <<EOF
X# Makefile for "less"
X# Generated $DATE by $0.
XEOF
X
Xcat >>makefile <<"EOF"
X#
X# Invoked as:
X# make all
X# or make install
X# Plain "make" is equivalent to "make all".
X#
X# If you add or delete functions, remake funcs.h by doing:
X# make newfuncs
X# This depends on the coding convention of function headers looking like:
X# " \t public <function-type> \n <function-name> ( ... ) "
X#
X# Also provided:
X# make lint # Runs "lint" on all the sources.
X# make clean # Removes "less" and the .o files.
X# make clobber # Pretty much the same as make "clean".
X
XSHELL = /bin/sh
X
XEOF
X
Xcat >defines.h <<EOF
X/* Definition file for less */
X/* Generated $DATE by $0. */
X
XEOF
X
Xcat >>defines.h <<EOF
X/*
X * Define XENIX if running under XENIX 3.0.
X */
X#define XENIX $xenix
X
XEOF
X$ECHO ""
X
X
X
Xif [ "X$sys" = "Xunknown" ]
Xthen
X alldefault=0
Xelse
X def=yes
X alldefault=1
X $ECHO "Do you want to use ALL the defaults for $sysname?"
X $ECHO " Enter \"yes\" if you have a STANDARD $sysname."
X $ECHO " Enter \"no\" if you want to change any of the defaults. [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) alldefault=1 ;;
X X[nN]*) alldefault=0 ;;
X esac
X $ECHO ""
Xfi
X
Xif [ $alldefault = 0 ]
Xthen
X alloptional=0
Xelse
X def=yes
X alloptional=1
X $ECHO "Do you want to use all the optional features of less?"
X $ECHO " Less has several features which you may or may not"
X $ECHO " wish to include, such as shell escapes."
X $ECHO " Enter \"yes\" if you want to include ALL the optional features."
X $ECHO " Enter \"no\" if you want to select individual features. [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) alloptional=1 ;;
X X[nN]*) alloptional=0 ;;
X esac
X $ECHO ""
Xfi
X
X
X
Xdef=yes
Xx=1
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "Does your C compiler support the \"void\" type? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * VOID is 1 if your C compiler supports the "void" type,
X * 0 if it does not.
X */
X#define VOID $x
X
XEOF
X
X
X
Xdef=long
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "What type is the \"offset\" argument to lseek? [$def] \c"
X read ans
X if [ "X$ans" != "X" ]
X then
X def=$ans
X fi
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * offset_t is the type which lseek() returns.
X * It is also the type of lseek()'s second argument.
X */
X#define offset_t $def
X
XEOF
X
X
X
X
Xdef=yes; x=1
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "Most Unix systems provide the stat() function."
X $ECHO "Does your system have stat()? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * STAT is 1 if your system has the stat() call.
X */
X#define STAT $x
X
XEOF
X
X
X
X
Xdef=yes; x=1
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "Most Unix systems provide the perror() function."
X $ECHO "Does your system have perror()? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * PERROR is 1 if your system has the perror() call.
X * (Actually, if it has sys_errlist, sys_nerr and errno.)
X */
X#define PERROR $x
X
XEOF
X
X
X
X
Xdef=yes; x=1
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "Most Unix systems provide the time() function."
X $ECHO "Does your system have time()? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * GET_TIME is 1 if your system has the time() call.
X */
X#define GET_TIME $x
X
XEOF
X
Xif [ $x = 0 ]
Xthen
X $ECHO "What is the APPROXIMATE performance of your"
X $ECHO "machine, as a percentage of a Vax 11/750?"
X $ECHO "(Enter 100 if your machine is as fast as a Vax,"
X $ECHO " 50 if it is half as fast, 200 if it is twice as fast, etc.)"
X $ECHO "The accuracy of this information is not critical."
X while :
X do
X $ECHO "Percent of Vax 11/750 [100]: \c"
X read ans
X if [ "X$ans" = "X" ]
X then
X ans=100
X fi
X longloop=`expr "$ans" "*" 3`
X if [ $? = 0 ]
X then
X break
X fi
X $ECHO "Enter a number please!"
X done
X $ECHO ""
X
X cat >>defines.h <<EOF
X/*
X * LONGLOOP is the number of lines we should process in the line number
X * scan before displaying a warning that it will take a while.
X */
X#define LONGLOOP ($longloop)
XEOF
Xfi
X
X
X
X
Xif [ "$sys" = "bsd" ]
Xthen
X def=no; x=0
Xelse
X def=yes; x=1
Xfi
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "Most System V systems have termio.h, while most"
X $ECHO "Berkeley-derived systems have sgtty.h."
X $ECHO "Does your system have termio.h? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * TERMIO is 1 if your system has /usr/include/termio.h.
X * This is normally the case for System 5.
X * If TERMIO is 0 your system must have /usr/include/sgtty.h.
X * This is normally the case for BSD.
X */
X#define TERMIO $x
X
XEOF
X
X
X
X
Xif [ "$sys" = "bsd" -a "$bsd41" = "0" ]
Xthen
X def=yes; x=1
Xelse
X def=no; x=0
Xfi
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "Most BSD 4.2 and 4.3 systems have the sigsetmask() call."
X $ECHO "Most System V and BSD 4.1 systems do not."
X $ECHO "Does your system have sigsetmask()? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * SIGSETMASK is 1 if your system has the sigsetmask() call.
X * This is normally the case only for BSD 4.2,
X * not for BSD 4.1 or System 5.
X */
X#define SIGSETMASK $x
X
XEOF
X
X
X
Xif [ "$sys" = "bsd" ]
Xthen
X def=2; REGCMP=0;RECOMP=1
Xelse
X def=1; REGCMP=1;RECOMP=0
Xfi
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "Most System V systems have the regcmp() function."
X $ECHO "Most Berkeley-derived systems have the re_comp() function."
X $ECHO "Does your system have:"
X $ECHO " 1. regcmp"
X $ECHO " 2. re_comp"
X $ECHO " 3. neither [$def] \c"
X read ans
X case "X$ans" in
X X1) REGCMP=1;RECOMP=0 ;;
X X2) REGCMP=0;RECOMP=1 ;;
X X3) REGCMP=0;RECOMP=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * REGCMP is 1 if your system has the regcmp() function.
X * This is normally the case for System 5.
X * RECOMP is 1 if your system has the re_comp() function.
X * This is normally the case for BSD.
X * If neither is 1, pattern matching is supported, but without metacharacters.
X */
X#define REGCMP $REGCMP
X#define RECOMP $RECOMP
X
XEOF
X
X
X
X
Xdef=yes
Xx=1
Xif [ $alloptional = 0 ]
Xthen
X $ECHO "Do you wish to allow shell escapes? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * SHELL_ESCAPE is 1 if you wish to allow shell escapes.
X * (This is possible only if your system supplies the system() function.)
X */
X#define SHELL_ESCAPE $x
X
XEOF
X
X
X
Xdef=yes
Xx=1
Xedname="vi"
Xif [ $alloptional = 0 ]
Xthen
X $ECHO "Do you wish to allow editor escapes? [$def] \c"
X read ans
X case "X$ans" in
X X[nN]*) x=0; edname="" ;;
X X[yY]*) x=1
X $ECHO "What is the pathname of the default editor? [$edname] \c"
X read ans
X if [ "x$ans" != "x" ]
X then
X edname=$ans
X fi
X ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * EDITOR is 1 if you wish to allow editor invocation (the "v" command).
X * (This is possible only if your system supplies the system() function.)
X * EDIT_PGM is the name of the (default) editor to be invoked.
X */
X#define EDITOR $x
X#define EDIT_PGM "$edname"
X
XEOF
X
X
X
X
Xdef=yes
Xx=1
Xif [ $alloptional = 0 ]
Xthen
X $ECHO "Do you wish to support \"tag\" files? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * TAGS is 1 if you wish to support tag files.
X */
X#define TAGS $x
X
XEOF
X
X
X
Xdef=yes
Xx=1
Xif [ $alloptional = 0 ]
Xthen
X $ECHO "Do you wish to allow user-defined key definitions? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
XUSERFILE=$x
Xcat >>defines.h <<EOF
X/*
X * USERFILE is 1 if you wish to allow a .less file to specify
X * user-defined key bindings.
X */
X#define USERFILE $x
X
XEOF
X
X
X
Xdef=yes
Xx=1
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "If your system provides the popen() function and"
X $ECHO "the \"$ECHO\" shell command, you may allow shell metacharacters"
X $ECHO "to be expanded in filenames."
X $ECHO "Do you wish to allow shell metacharacters in filenames? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * GLOB is 1 if you wish to have shell metacharacters expanded in filenames.
X * This will generally work if your system provides the "popen" function
X * and the "$ECHO" shell command.
X */
X#define GLOB $x
X
XEOF
X
X
X
Xdef=yes
Xx=1
Xif [ $alloptional = 0 ]
Xthen
X $ECHO "Do you wish to allow log files (-l option)? [$def] \c"
X read ans
X case "X$ans" in
X X[yY]*) x=1 ;;
X X[nN]*) x=0 ;;
X esac
X $ECHO ""
Xfi
Xcat >>defines.h <<EOF
X/*
X * LOGFILE is 1 if you wish to allow the -l option (to create log files).
X */
X#define LOGFILE $x
X
XEOF
X
Xcat >>defines.h <<EOF
X/*
X * ONLY_RETURN is 1 if you want RETURN to be the only input which
X * will continue past an error message.
X * Otherwise, any key will continue past an error message.
X */
X#define ONLY_RETURN 0
X
XEOF
X
Xcat >>makefile <<EOF
X
X##########################################################################
X# Compilation environment.
X##########################################################################
X
XEOF
X
X
X
Xif [ "$xenix" = "1" ]
Xthen
X LIBS="-ltermlib"
Xelif [ "$sys" = "bsd" ]
Xthen
X LIBS="-ltermcap"
Xelse
X LIBS="-lcurses -ltermcap -lPW"
Xfi
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "To build \"less\", you must link with libraries supplied by your system."
X $ECHO "(If this needs to be changed later, edit the makefile"
X $ECHO "and change the definition of LIBS.)"
X $ECHO "What libraries should be used [$LIBS] \c"
X read ans
X if [ "X$ans" != "X" ]
X then
X LIBS="$ans"
X fi
X $ECHO ""
Xfi
Xcat >>makefile <<EOF
X# LIBS is the list of libraries needed.
XLIBS = $LIBS
X
XEOF
X
X
X
XINSTALL_LESS="/usr/local/bin/less"
XINSTALL_KEY="/usr/local/bin/lesskey"
XINSTALL_HELP="/usr/local/bin/less.help"
XINSTALL_LESSMAN="/usr/man/man1/less.1"
XINSTALL_KEYMAN="/usr/man/man1/lesskey.1"
XLESS_MANUAL="less.nro"
XKEY_MANUAL="lesskey.nro"
Xif [ $alldefault = 0 ]
Xthen
X $ECHO "What is the name of the \"public\" (installed) version of less?"
X $ECHO " [$INSTALL_LESS] \c"
X read ans
X if [ "X$ans" != "X" ]
X then
X INSTALL_LESS="$ans"
X fi
X $ECHO "What is the name of the \"public\" (installed) version of lesskey?"
X $ECHO " [$INSTALL_KEY] \c"
X read ans
X if [ "X$ans" != "X" ]
X then
X INSTALL_KEY="$ans"
X fi
X $ECHO "What is the name of the \"public\" (installed) version of the help file?"
X $ECHO " [$INSTALL_HELP] \c"
X read ans
X if [ "X$ans" != "X" ]
X then
X INSTALL_HELP="$ans"
X fi
X $ECHO "What is the name of the \"public\" (installed) version of the less manual page?"
X $ECHO " [$INSTALL_LESSMAN] \c"
X read ans
X if [ "X$ans" != "X" ]
X then
X INSTALL_LESSMAN="$ans"
X fi
X $ECHO "What is the name of the \"public\" (installed) version of the lesskey manual page?"
X $ECHO " [$INSTALL_KEYMAN] \c"
X read ans
X if [ "X$ans" != "X" ]
X then
X INSTALL_KEYMAN="$ans"
X fi
X $ECHO ""
Xfi
Xcat >>makefile <<EOF
X# INSTALL_LESS is a list of the public versions of less.
X# INSTALL_KEY is a list of the public versions of lesskey.
X# INSTALL_HELP is a list of the public version of the help file.
X# INSTALL_LESSMAN is a list of the public versions of the less manual page.
X# INSTALL_KEYMAN is a list of the public versions of the lesskey manual page.
XINSTALL_LESS = \$(ROOT)$INSTALL_LESS
XINSTALL_KEY = \$(ROOT)$INSTALL_KEY
XINSTALL_HELP = \$(ROOT)$INSTALL_HELP
XINSTALL_LESSMAN = \$(ROOT)$INSTALL_LESSMAN
XINSTALL_KEYMAN = \$(ROOT)$INSTALL_KEYMAN
XLESS_MANUAL = $LESS_MANUAL
XKEY_MANUAL = $KEY_MANUAL
XHELPFILE = $INSTALL_HELP
X
X
XEOF
X
X
X
Xcat >>makefile <<"EOF"
X# OPTIM is passed to the compiler and the loader.
X# It is normally "-O" but may be, for example, "-g".
XOPTIM = -O
X
XCFLAGS = $(OPTIM)
X
X
X
X##########################################################################
X# Files
X##########################################################################
X
XSRC1 = main.c option.c prim.c ch.c position.c input.c linenum.c
XSRC2 = screen.c prompt.c line.c signal.c os.c help.c ttyin.c command.c
XSRC3 = output.c decode.c tags.c version.c
XSRC = $(SRC1) $(SRC2) $(SRC3)
XOBJ = main.o option.o prim.o ch.o position.o input.o output.o \
X screen.o prompt.o line.o signal.o os.o help.o ttyin.o \
X decode.o command.o linenum.o tags.o version.o
X
X
X##########################################################################
X# Rules for building stuff
X##########################################################################
X
XEOF
X
Xif [ "$USERFILE" = "1" ]
Xthen
X cat >>makefile <<"EOF"
Xall: less lesskey
Xinstall: install_less install_help install_key install_lman install_kman
XEOF
Xelse
X cat >>makefile <<"EOF"
Xall: less
Xinstall: install_less install_help install_lman
XEOF
Xfi
X
Xcat >>makefile <<"EOF"
X
Xless: $(OBJ)
X $(CC) $(LDFLAGS) $(OPTIM) -o less $(OBJ) $(LIBS) $(LDLIBS)
X
Xlesskey: lesskey.o
X $(CC) $(LDFLAGS) $(OPTIM) -o lesskey lesskey.o $(LDLIBS)
X
X# help.o depends on makefile for the definition of HELPFILE
Xhelp.o: makefile
X $(CC) $(CFLAGS) -c -DHELPFILE=\"$(HELPFILE)\" help.c
X
Xinstall_less: less
X for f in $(INSTALL_LESS); do rm -f $$f; cp less $$f; done
X touch install_less
X
Xinstall_key: lesskey
X for f in $(INSTALL_KEY); do rm -f $$f; cp lesskey $$f; done
X touch install_key
X
Xinstall_help: less.help
X for f in $(INSTALL_HELP); do rm -f $$f; cp less.help $$f; done
X touch install_help
X
Xinstall_lman: $(LESS_MANUAL)
X for f in $(INSTALL_LESSMAN); do rm -f $$f; cp $(LESS_MANUAL) $$f; done
X touch install_lman
X
Xinstall_kman: $(KEY_MANUAL)
X for f in $(INSTALL_KEYMAN); do rm -f $$f; cp $(KEY_MANUAL) $$f; done
X touch install_kman
X
X##########################################################################
X# Maintenance
X##########################################################################
X
Xlint:
X lint -hp $(SRC)
X
Xnewfuncs funcs.h:
X if [ -f funcs.h ]; then mv funcs.h funcs.h.OLD; fi
X awk -f mkfuncs.awk $(SRC) >funcs.h
X
Xclean:
X rm -f $(OBJ) lesskey.o less lesskey vecho
X
Xclobber:
X rm -f *.o less lesskey vecho install_less install_key \
X install_help install_lman install_kman
X
Xshar:
X shar -v linstall less.h position.h funcs.h cmd.h \
X vecho.c lesskey.c less.nro lesskey.nro lesskey.man > less.shar.a
X shar -v $(SRC1) > less.shar.b
X shar -v $(SRC2) > less.shar.c
X shar -v $(SRC3) less.man README less.help *.awk >less.shar.d
X
X
X##########################################################################
X# Dependencies
X##########################################################################
X
X$(OBJ): less.h funcs.h defines.h position.h
Xcommand.o decode.o: cmd.h
Xlesskey.o: less.h funcs.h defines.h cmd.h
X
XEOF
X$ECHO ""
X
X$ECHO "The makefile has been built."
X$ECHO "You should check it to make sure everything is as you want it to be."
X$ECHO "When you are satisfied with the makefile, just type \"make\""
X$ECHO "and \"less\" will be built."
END_OF_FILE
echo shar: Extracting \"less.h\"
sed "s/^X//" >'less.h' <<'END_OF_FILE'
X/*
X * Standard include file for "less".
X */
X
X/*
X * Include the file of compile-time options.
X */
X#include "defines.h"
X
X/*
X * Language details.
X */
X#if !VOID
X#define void int
X#endif
X#define public /* PUBLIC FUNCTION */
X
X/*
X * Special types and constants.
X */
Xtypedef long POSITION;
X/*
X * {{ Warning: if POSITION is changed to other than "long",
X * you may have to change some of the printfs which use "%ld"
X * to print a variable of type POSITION. }}
X */
X
X#define NULL_POSITION ((POSITION)(-1))
X
X/*
X * The type of signal handler functions.
X * Usually int, although it should be void.
X */
Xtypedef int HANDLER;
X
X
X#define FILENAME 128 /* Max size of a filename */
X
X#define EOI (0)
X#ifndef NULL
X#define NULL (0)
X#endif
X
X#define READ_INTR (-2)
X
X/* How quiet should we be? */
X#define NOT_QUIET 0 /* Ring bell at eof and for errors */
X#define LITTLE_QUIET 1 /* Ring bell only for errors */
X#define VERY_QUIET 2 /* Never ring bell */
X
X/* How should we prompt? */
X#define PR_SHORT 0 /* Prompt with colon */
X#define PR_MEDIUM 1 /* Prompt with message */
X#define PR_LONG 2 /* Prompt with longer message */
X
X/* How should we handle backspaces? */
X#define BS_SPECIAL 0 /* Do special things for underlining and bold */
X#define BS_NORMAL 1 /* \b treated as normal char; actually output */
X#define BS_CONTROL 2 /* \b treated as control char; prints as ^H */
X
X/* Special chars used to tell put_line() to do something special */
X#define UL_CHAR '\201' /* Enter underline mode */
X#define UE_CHAR '\202' /* Exit underline mode */
X#define BO_CHAR '\203' /* Enter boldface mode */
X#define BE_CHAR '\204' /* Exit boldface mode */
X
X#define CONTROL(c) ((c)&037)
X#define SIGNAL(sig,func) signal(sig,func)
X
X/* Library function declarations */
Xoffset_t lseek();
Xchar *calloc();
X
X#include "funcs.h"
END_OF_FILE
echo shar: Extracting \"position.h\"
sed "s/^X//" >'position.h' <<'END_OF_FILE'
X/*
X * Include file for interfacing to position.c modules.
X */
X#define TOP (0)
X#define TOP_PLUS_ONE (1)
X#define BOTTOM (-1)
X#define BOTTOM_PLUS_ONE (-2)
X#define MIDDLE (-3)
END_OF_FILE
echo shar: Extracting \"funcs.h\"
sed "s/^X//" >'funcs.h' <<'END_OF_FILE'
X public void edit ();
X public void next_file ();
X public void prev_file ();
X public void strtcpy ();
X public char * save ();
X public void quit ();
X public void init_option ();
X public void toggle_option ();
X public int single_char_option ();
X public void scan_option ();
X public int getnum ();
X public void forward ();
X public void backward ();
X public void repaint ();
X public void jump_forw ();
X public void jump_back ();
X public void jump_percent ();
X public void jump_loc ();
X public void init_mark ();
X public void setmark ();
X public void lastmark ();
X public void gomark ();
X public int get_back_scroll ();
X public void search ();
X public void end_logfile ();
X public void sync_logfile ();
X public int ch_seek ();
X public int ch_end_seek ();
X public int ch_beg_seek ();
X public POSITION ch_length ();
X public POSITION ch_tell ();
X public int ch_forw_get ();
X public int ch_back_get ();
X public void ch_init ();
X public POSITION position ();
X public void add_forw_pos ();
X public void add_back_pos ();
X public void pos_clear ();
X public int onscreen ();
X public POSITION forw_line ();
X public POSITION back_line ();
X public void clr_linenum ();
X public void add_lnum ();
X public int find_linenum ();
X public int currline ();
X public void raw_mode ();
X public void get_term ();
X public void init ();
X public void deinit ();
X public void home ();
X public void add_line ();
X public void lower_left ();
X public void bell ();
X public void vbell ();
X public void clear ();
X public void clear_eol ();
X public void so_enter ();
X public void so_exit ();
X public void ul_enter ();
X public void ul_exit ();
X public void bo_enter ();
X public void bo_exit ();
X public void backspace ();
X public void putbs ();
X public void init_prompt ();
X public char * eq_message ();
X public char * pr_string ();
X public void prewind ();
X public int pappend ();
X public POSITION forw_raw_line ();
X public POSITION back_raw_line ();
X public HANDLER winch ();
X public HANDLER winch ();
X public void init_signals ();
X public int psignals ();
X public void lsystem ();
X public int iread ();
X public void intread ();
X public long get_time ();
X public char * glob ();
X public char * glob ();
X public char * bad_file ();
X public char * bad_file ();
X public char * errno_message ();
X public char * errno_message ();
X public void help ();
X public void open_getchr ();
X public int getchr ();
X public void commands ();
X public void put_line ();
X public int control_char ();
X public int carat_char ();
X public void flush ();
X public void dropout ();
X public void putchr ();
X public void putstr ();
X public void error ();
X public void ierror ();
X public int cmd_decode ();
X public void noprefix ();
X public void init_cmd ();
X public int findtag ();
X public int tagsearch ();
END_OF_FILE
echo shar: Extracting \"cmd.h\"
sed "s/^X//" >'cmd.h' <<'END_OF_FILE'
X#define MAX_USERCMD 200
X#define MAX_CMDLEN 16
X
X#define A_AGAIN_SEARCH 1
X#define A_B_LINE 2
X#define A_B_SCREEN 3
X#define A_B_SCROLL 4
X#define A_B_SEARCH 5
X#define A_DIGIT 6
X#define A_DISP_OPTION 7
X#define A_DEBUG 8
X#define A_EXAMINE 9
X#define A_FIRSTCMD 10
X#define A_FREPAINT 11
X#define A_F_LINE 12
X#define A_F_SCREEN 13
X#define A_F_SCROLL 14
X#define A_F_SEARCH 15
X#define A_GOEND 16
X#define A_GOLINE 17
X#define A_GOMARK 18
X#define A_HELP 19
X#define A_NEXT_FILE 20
X#define A_PERCENT 21
X#define A_PREFIX 22
X#define A_PREV_FILE 23
X#define A_QUIT 24
X#define A_REPAINT 25
X#define A_SETMARK 26
X#define A_SHELL 27
X#define A_STAT 28
X
X#define A_TOGGLE_OPTION 30
X#define A_VERSION 31
X#define A_VISUAL 32
X
X#define A_INVALID 100
X#define A_NOACTION 101
END_OF_FILE
echo shar: Extracting \"vecho.c\"
sed "s/^X//" >'vecho.c' <<'END_OF_FILE'
X/*
X * This dumb little program emulates the System V "echo" command,
X * to accomodate BSD systems which don't understand the \c escape,
X * meaning don't echo a newline. BSD uses "echo -n".
X */
X
X#include <stdio.h>
X
Xint putnl;
X
Xmain(argc, argv)
X int argc;
X char *argv[];
X{
X putnl = 1;
X while (--argc > 0)
X {
X vecho(*++argv);
X if (argc > 1)
X putchar(' ');
X }
X if (putnl)
X putchar('\n');
X}
X
Xvecho(str)
X char *str;
X{
X register char *s;
X
X for (s = str; *s != '\0'; s++)
X {
X if (*s == '\\' && s[1] == 'c')
X {
X putnl = 0;
X return;
X }
X putchar(*s);
X }
X}
END_OF_FILE
echo shar: Extracting \"lesskey.c\"
sed "s/^X//" >'lesskey.c' <<'END_OF_FILE'
X/*
X * lesskey [-o output] [input]
X *
X * Make a .less file.
X * If no input file is specified, standard input is used.
X * If no output file is specified, $HOME/.less is used.
X *
X * The .less file is used to specify (to "less") user-defined
X * key bindings. Basically any sequence of 1 to MAX_CMDLEN
X * keystrokes may be bound to an existing less function.
X *
X * The input file is an ascii file consisting of a
X * sequence of lines of the form:
X * string <whitespace> action <newline>
X *
X * "string" is a sequence of command characters which form
X * the new user-defined command. The command
X * characters may be:
X * 1. The actual character itself.
X * 2. A character preceeded by ^ to specify a
X * control character (e.g. ^X means control-X).
X * 3. Any character (other than an octal digit) preceeded by
X * a \ to specify the character itself (characters which
X * must be preceeded by \ include ^, \, and whitespace.
X * 4. A backslash followed by one to three octal digits
X * to specify a character by its octal value.
X * "action" is the name of a "less" action, from the table below.
X *
X * Blank lines and lines which start with # are ignored.
X *
X *
X * The output file is a non-ascii file, consisting of
X * zero or more byte sequences of the form:
X * string <0> <action>
X *
X * "string" is the command string.
X * "<0>" is one null byte.
X * "<action>" is one byte containing the action code (the A_xxx value).
X *
X *
X * Revision history
X *
X * v1: Initial version. 10/13/87 mark
X */
X
X#include <stdio.h>
X#include "less.h"
X#include "cmd.h"
X
Xchar usertable[MAX_USERCMD];
X
Xstruct cmdname
X{
X char *cn_name;
X int cn_action;
X} cmdnames[] =
X{
X "back-line", A_B_LINE,
X "back-screen", A_B_SCREEN,
X "back-scroll", A_B_SCROLL,
X "back-search", A_B_SEARCH,
X "debug", A_DEBUG,
X "display-flag", A_DISP_OPTION,
X "display-option", A_DISP_OPTION,
X "end", A_GOEND,
X "examine", A_EXAMINE,
X "first-cmd", A_FIRSTCMD,
X "firstcmd", A_FIRSTCMD,
X "flush-repaint", A_FREPAINT,
X "forw-line", A_F_LINE,
X "forw-screen", A_F_SCREEN,
X "forw-scroll", A_F_SCROLL,
X "forw-search", A_F_SEARCH,
X "goto-end", A_GOEND,
X "goto-line", A_GOLINE,
X "goto-mark", A_GOMARK,
X "help", A_HELP,
X "invalid", A_NOACTION,
X "next-file", A_NEXT_FILE,
X "noaction", A_NOACTION,
X "percent", A_PERCENT,
X "prev-file", A_PREV_FILE,
X "quit", A_QUIT,
X "repaint", A_REPAINT,
X "repaint-flush", A_FREPAINT,
X "repeat-search", A_AGAIN_SEARCH,
X "set-mark", A_SETMARK,
X "shell", A_SHELL,
X "status", A_STAT,
X "toggle-flag", A_TOGGLE_OPTION,
X "toggle-option", A_TOGGLE_OPTION,
X "version", A_VERSION,
X "visual", A_VISUAL,
X NULL, 0
X};
X
Xmain(argc, argv)
X int argc;
X char *argv[];
X{
X char *p; /* {{ Can't be register since we use &p }} */
X register char *up; /* Pointer into usertable */
X FILE *desc; /* Description file (input) */
X FILE *out; /* Output file */
X int linenum; /* Line number in input file */
X char *currcmd; /* Start of current command string */
X int errors;
X int i;
X char line[100];
X char *outfile;
X
X extern char *getenv();
X
X /*
X * Process command line arguments.
X */
X outfile = NULL;
X while (--argc > 0 && **(++argv) == '-')
X {
X switch (argv[0][1])
X {
X case 'o':
X outfile = &argv[0][2];
X if (*outfile == '\0')
X {
X if (--argc <= 0)
X usage();
X outfile = *(++argv);
X }
X break;
X default:
X usage();
X }
X }
X if (argc > 1)
X usage();
X
X
X /*
X * Open the input file, or use standard input if none specified.
X */
X if (argc > 0)
X {
X if ((desc = fopen(*argv, "r")) == NULL)
X {
X perror(*argv);
X exit(1);
X }
X } else
X desc = stdin;
X
X /*
X * Read the input file, one line at a time.
X * Each line consists of a command string,
X * followed by white space, followed by an action name.
X */
X linenum = 0;
X errors = 0;
X up = usertable;
X while (fgets(line, sizeof(line), desc) != NULL)
X {
X ++linenum;
X
X /*
X * Skip leading white space.
X * Replace the final newline with a null byte.
X * Ignore blank lines and comment lines.
X */
X p = line;
X while (*p == ' ' || *p == '\t')
X ++p;
X for (i = 0; p[i] != '\n' && p[i] != '\0'; i++)
X ;
X p[i] = '\0';
X if (*p == '#' || *p == '\0')
X continue;
X
X /*
X * Parse the command string and store it in the usertable.
X */
X currcmd = up;
X do
X {
X if (up >= usertable + MAX_USERCMD)
X {
X fprintf(stderr, "too many commands, line %d\n",
X linenum);
X exit(1);
X }
X if (up >= currcmd + MAX_CMDLEN)
X {
X fprintf(stderr, "command too long on line %d\n",
X linenum);
X errors++;
X break;
X }
X
X *up++ = tchar(&p);
X
X } while (*p != ' ' && *p != '\t' && *p != '\0');
X
X /*
X * Terminate the command string with a null byte.
X */
X *up++ = '\0';
X
X /*
X * Skip white space between the command string
X * and the action name.
X * Terminate the action name if it is followed
X * by whitespace or a # comment.
X */
X if (*p == '\0')
X {
X fprintf(stderr, "missing whitespace on line %d\n",
X linenum);
X errors++;
X continue;
X }
X while (*p == ' ' || *p == '\t')
X ++p;
X for (i = 0; p[i] != ' ' && p[i] != '\t' &&
X p[i] != '#' && p[i] != '\0'; i++)
X ;
X p[i] = '\0';
X
X /*
X * Parse the action name and store it in the usertable.
X */
X for (i = 0; cmdnames[i].cn_name != NULL; i++)
X if (strcmp(cmdnames[i].cn_name, p) == 0)
X break;
X if (cmdnames[i].cn_name == NULL)
X {
X fprintf(stderr, "unknown action <%s> on line %d\n",
X p, linenum);
X errors++;
X continue;
X }
X *up++ = cmdnames[i].cn_action;
X }
X
X if (errors > 0)
X {
X fprintf(stderr, "%d errors; no output produced\n", errors);
X exit(1);
X }
X
X /*
X * Write the output file.
X * If no output file was specified, use "$HOME/.less"
X */
X if (outfile == NULL)
X {
X p = getenv("HOME");
X if (p == NULL)
X {
X fprintf(stderr, "cannot find $HOME\n");
X exit(1);
X }
X strcpy(line, p);
X strcat(line, "/.less");
X outfile = line;
X }
X if ((out = fopen(outfile, "w")) == NULL)
X perror(outfile);
X else
X fwrite((char *)usertable, 1, up-usertable, out);
X}
X
X/*
X * Parse one character of the command string.
X */
Xtchar(pp)
X char **pp;
X{
X register char *p;
X register char ch;
X register int i;
X
X p = *pp;
X switch (*p)
X {
X case '\\':
X if (*++p >= '0' && *p <= '7')
X {
X /*
X * Parse an octal number.
X */
X ch = 0;
X i = 0;
X do
X ch = 8*ch + (*p - '0');
X while (*++p >= '0' && *p <= '7' && ++i < 3);
X *pp = p;
X return (ch);
X }
X /*
X * Backslash followed by a char just means that char.
X */
X *pp = p+1;
X return (*p);
X case '^':
X /*
X * Carat means CONTROL.
X */
X *pp = p+2;
X return (CONTROL(p[1]));
X }
X *pp = p+1;
X return (*p);
X}
X
Xusage()
X{
X fprintf(stderr, "usage: lesskey [-o output] [input]\n");
X exit(1);
X}
END_OF_FILE
echo shar: Extracting \"less.nro\"
sed "s/^X//" >'less.nro' <<'END_OF_FILE'
X.TH LESS 1
X.SH NAME
Xless \- opposite of more
X.SH SYNOPSIS
X.B "less [-[+]aABcCdeEimMnqQuUsw] [-b\fIN\fB] [-h\fIN\fB] [-x\fIN\fB] [-[z]\fIN\fB]"
X.br
X.B " [-P[mM=]\fIstring\fB] [-[lL]\fIlogfile\fB] [+\fIcmd\fB]"
X.br
X.B " [-t\fItag\fB] [\fIfilename\fB]..."
X.SH DESCRIPTION
X.I Less
Xis a program similar to
X.I more
X(1), but which allows backwards movement
Xin the file as well as forward movement.
XAlso,
X.I less
Xdoes not have to read the entire input file before starting,
Xso with large input files it starts up faster than text editors like
X.I vi
X(1).
X.I Less
Xuses termcap (or terminfo on some systems),
Xso it can run on a variety of terminals.
XThere is even limited support for hardcopy terminals.
X(On a hardcopy terminal, lines which should be printed at the top
Xof the screen are prefixed with an up-arrow.)
X.PP
XCommands are based on both
X.I more
Xand
X.I vi.
XCommands may be preceeded by a decimal number,
Xcalled N in the descriptions below.
XThe number is used by some commands, as indicated.
X
X.SH COMMANDS
XIn the following descriptions, ^X means control-X.
XESC stands for the ESCAPE key; for example ESC-v means the
Xtwo character sequence "ESCAPE", then "v".
X.IP H
XHelp: display a summary of these commands.
XIf you forget all the other commands, remember this one.
X.PP
X.IP "SPACE or f or ^F or ^V"
XScroll forward N lines, default one window (see option -z below).
XIf N is more than the screen size, only the final screenful is displayed.
XWarning: some systems use ^V as a special literalization character.
X.PP
X.IP "b or ^B or ESC-v"
XScroll backward N lines, default one window (see option -z below).
XIf N is more than the screen size, only the final screenful is displayed.
X.PP
X.IP "RETURN or ^N or e or ^E or j or ^J"
XScroll forward N lines, default 1.
XThe entire N lines are displayed, even if N is more than the screen size.
X.PP
X.IP "y or ^Y or ^P or k or ^K"
XScroll backward N lines, default 1.
XThe entire N lines are displayed, even if N is more than the screen size.
XWarning: some systems use ^Y as a special job control character.
X.PP
X.IP "d or ^D"
XScroll forward N lines, default one half of the screen size.
XIf N is specified, it becomes the new default for
Xsubsequent d and u commands.
X.PP
X.IP "u or ^U"
XScroll backward N lines, default one half of the screen size.
XIf N is specified, it becomes the new default for
Xsubsequent d and u commands.
X.PP
X.IP "r or ^R or ^L"
XRepaint the screen.
X.PP
X.IP R
XRepaint the screen, discarding any buffered input.
XUseful if the file is changing while it is being viewed.
X.PP
X.IP "g or < or ESC-<"
XGo to line N in the file, default 1 (beginning of file).
X(Warning: this may be slow if N is large.)
X.PP
X.IP "G or > or ESC->"
XGo to line N in the file, default the end of the file.
X(Warning: this may be slow if N is large,
Xor if N is not specified and
Xstandard input, rather than a file, is being read.)
X.PP
X.IP "p or %"
XGo to a position N percent into the file.
XN should be between 0 and 100.
X(This works if standard input is being read, but only if
X.I less
Xhas already read to the end of the file.
XIt is always fast, but not always useful.)
X.PP
X.IP m
XFollowed by any lowercase letter,
Xmarks the current position with that letter.
X.PP
X.IP "'"
X(Single quote.)
XFollowed by any lowercase letter, returns to the position which
Xwas previously marked with that letter.
XFollowed by another single quote, returns to the postion at
Xwhich the last "large" movement command was executed.
XAll marks are lost when a new file is examined.
X.PP
X.IP "^X^X"
XSame as single quote.
X.PP
X.IP /pattern
XSearch forward in the file for the N-th line containing the pattern.
XN defaults to 1.
XThe pattern is a regular expression, as recognized by
X.I ed.
XThe search starts at the second line displayed
X(but see the -a option, which changes this).
X.PP
X.IP ?pattern
XSearch backward in the file for the N-th line containing the pattern.
XThe search starts at the line immediately before the top line displayed.
X.PP
X.IP /!pattern
XLike /, but the search is for the N-th line
Xwhich does NOT contain the pattern.
X.PP
X.IP ?!pattern
XLike ?, but the search is for the N-th line
Xwhich does NOT contain the pattern.
X.PP
X.IP n
XRepeat previous search, for N-th line containing the last pattern
X(or NOT containing the last pattern, if the previous search
Xwas /! or ?!).
X.PP
X.IP "E [filename]"
XExamine a new file.
XIf the filename is missing, the "current" file (see the N and P commands
Xbelow) from the list of files in the command line is re-examined.
XIf the filename is a pound sign (#), the previously examined file is
Xre-examined.
X.PP
X.IP "^X^V or :e"
XSame as E.
XWarning: some systems use ^V as a special literalization character.
X.PP
X.IP "N or :n"
XExamine the next file (from the list of files given in the command line).
XIf a number N is specified (not to be confused with the command N),
Xthe N-th next file is examined.
X.PP
X.IP "P or :p"
XExamine the previous file.
XIf a number N is specified, the N-th previous file is examined.
X.PP
X.IP "= or ^G"
XPrints some information about the file being viewed,
Xincluding its name
Xand the line number and byte offset of the bottom line being displayed.
XIf possible, it also prints the length of the file
Xand the percent of the file above the last displayed line.
X.PP
X.IP \-
XFollowed by one of the command line option letters (see below),
Xthis will change the setting of that option
Xand print a message describing the new setting.
XIf the option letter has a numeric value (such as -b or -h),
Xor a string value (such as -P or -t),
Xa new value may be entered after the option letter.
X.PP
X.IP \_
X(Underscore.)
XFollowed by one of the command line option letters (see below),
Xthis will print a message describing the current setting of that option.
XThe setting of the option is not changed.
X.PP
X.IP +cmd
XCauses the specified cmd to be executed each time a new file is examined.
XFor example, +G causes
X.I less
Xto initially display each file starting at the end
Xrather than the beginning.
X.PP
X.IP V
XPrints the version number of
X.I less
Xbeing run.
X.PP
X.IP "q or :q or ZZ"
XExits
X.I less.
X.PP
XThe following
Xtwo
Xcommands may or may not be valid, depending on your particular installation.
X.PP
X.IP v
XInvokes an editor to edit the current file being viewed.
XThe editor is taken from the environment variable EDITOR,
Xor defaults to "vi".
X.PP
X.IP "! shell-command"
XInvokes a shell to run the shell-command given.
XA percent sign in the command is replaced by the name of the
Xcurrent file. "!!" repeats the last shell command.
X"!" with no shell command simply invokes a shell.
XIn all cases, the shell is taken from the environment variable SHELL,
Xor defaults to "sh".
X.PP
X.SH OPTIONS
XCommand line options are described below.
XMost options may be changed while
X.I less
Xis running, via the "\-" command.
X.PP
XOptions are also taken from the environment variable "LESS".
XFor example,
Xto avoid typing "less -options ..." each time
X.I less
Xis invoked, you might tell
X.I csh:
X.sp
Xsetenv LESS "-options"
X.sp
Xor if you use
X.I sh:
X.sp
XLESS="-options"; export LESS
X.sp
XThe environment variable is parsed before the command line,
Xso command line options override the LESS environment variable.
XIf an option appears in the LESS variable, it can be reset
Xto its default on the command line by beginning the command
Xline option with "-+".
X.sp
XA dollar sign ($) may be used to signal the end of an option string.
XThis is important only for options like -P which take a
Xfollowing string.
X.IP -a
XNormally, forward searches start just after
Xthe top displayed line (that is, at the second displayed line).
XThus, forward searches include the currently displayed screen.
XThe -a option causes forward searches to start
Xjust after the bottom line displayed,
Xthus skipping the currently displayed screen.
X.IP -A
XThe -A option causes searches to start at the second SCREEN line
Xdisplayed, as opposed to the default which is to start at the second
XREAL line displayed.
XFor example, suppose a long real line occupies the first three screen lines.
XThe default search will start at the second real line (the fourth
Xscreen line), while the -A option
Xwill cause the search to start at the second screen line (in the
Xmidst of the first real line).
X(This option is rarely useful.)
X.IP -b
XThe -b\fIn\fR option tells
X.I less
Xto use a non-standard number of buffers.
XBuffers are 1K, and normally 10 buffers are used
X(except if data in coming from standard input; see the -B option).
XThe number \fIn\fR specifies a different number of buffers to use.
X.IP -B
XNormally, when data is coming from standard input,
Xbuffers are allocated automatically as needed, to avoid loss of data.
XThe -B option disables this feature, so that only the default number
Xof buffers are used.
XIf more data is read than will fit in the buffers, the oldest
Xdata is discarded.
X.IP -c
XNormally,
X.I less
Xwill repaint the screen by scrolling from the bottom of the screen.
XIf the -c option is set, when
X.I less
Xneeds to change the entire display, it will paint from the top line down.
X.IP -C
XThe -C option is like -c, but the screen is cleared before it is repainted.
X.IP -d
XNormally,
X.I less
Xwill complain if the terminal is dumb; that is, lacks some important capability,
Xsuch as the ability to clear the screen or scroll backwards.
XThe -d option suppresses this complaint
X(but does not otherwise change the behavior of the program on a dumb terminal).
X.IP -e
XNormally the only way to exit less is via the "q" command.
XThe -e option tells less to automatically exit
Xthe second time it reaches end-of-file.
X.IP -E
XThe -E flag causes less to exit the first time it reaches end-of-file.
X.IP -h
XNormally,
X.I less
Xwill scroll backwards when backwards movement is necessary.
XThe -h option specifies a maximum number of lines to scroll backwards.
XIf it is necessary to move backwards more than this many lines,
Xthe screen is repainted in a forward direction.
X(If the terminal does not have the ability to scroll
Xbackwards, -h0 is implied.)
X.IP -i
XThe -i option causes searches to ignore case; that is,
Xuppercase and lowercase are considered identical.
XAlso, text which is overstruck or underlined can be searched for.
X.IP -l
XThe -l option, followed immediately by a filename,
Xwill cause
X.I less
Xto copy its input to the named file as it is being viewed.
XThis applies only when the input file is a pipe,
Xnot an ordinary file.
XIf the file already exists, less will ask for confirmation before
Xoverwriting it.
X.IP -L
XThe -L option is like -l, but it will overwrite an existing
Xfile without asking for confirmation.
X.sp
XIf no log file has been specified,
Xthe -l and -L options can be used from within less to specify a log file.
XWithout a file name, they will simply report the name of the log file.
X.IP -m
XNormally,
X.I less
Xprompts with a colon.
XThe -m option causes
X.I less
Xto prompt verbosely (like
X.I more),
Xwith the percent into the file.
X.IP -M
XThe -M option causes
X.I less
Xto prompt even more verbosely than
X.I more.
X.IP -n
XThe -n flag suppresses line numbers.
XThe default (to use line numbers) may cause
X.I less
Xto run more slowly in some cases, especially with a very large input file.
XSuppressing line numbers with the -n flag will avoid this problem.
XUsing line numbers means: the line number will be displayed in the verbose
Xprompt and in the = command,
Xand the v command will pass the current line number to the editor.
X.IP -P
XThe -P option provides a way to tailor the three prompt
Xstyles to your own preference.
XYou would normally put this option in your LESS environment
Xvariable, rather than type it in with each less command.
XSuch an option must either be the last option in the LESS variable,
Xor be terminated by a dollar sign.
X-P followed by a string changes the default (short) prompt to that string.
X-Pm changes the medium (-m) prompt to the string, and
X-PM changes the long (-M) prompt.
XAlso, -P= changes the message printed by the = command to the given string.
XAll prompt strings consist of a sequence of
Xletters and special escape sequences.
XSee the section on PROMPTS for more details.
X.IP -q
XNormally, if an attempt is made to scroll past the end of the file
Xor before the beginning of the file, the terminal bell is rung to
Xindicate this fact.
XThe -q option tells
X.I less
Xnot to ring the bell at such times.
XIf the terminal has a "visual bell", it is used instead.
X.IP -Q
XEven if -q is given,
X.I less
Xwill ring the bell on certain other errors,
Xsuch as typing an invalid character.
XThe -Q option tells
X.I less
Xto be quiet all the time; that is, never ring the terminal bell.
XIf the terminal has a "visual bell", it is used instead.
X.IP -s
XThe -s option causes
Xconsecutive blank lines to be squeezed into a single blank line.
XThis is useful when viewing
X.I nroff
Xoutput.
X.IP -t
XThe -t option, followed immediately by a TAG,
Xwill edit the file containing that tag.
XFor this to work, there must be a file called "tags" in the
Xcurrent directory, which was previously built by the
X.I ctags
X(1) command.
XThis option may also be specified from within less
X(using the \- command) as a way of examining a new file.
X.IP -u
XIf the -u option is given,
Xbackspaces are treated as printable characters;
Xthat is, they are sent to the terminal when they appear in the input.
X.IP -U
XIf the -U option is given,
Xbackspaces are printed as the two character sequence "^H".
X.sp
XIf neither -u nor -U is given,
Xbackspaces which appear adjacent to an underscore character
Xare treated specially:
Xthe underlined text is displayed
Xusing the terminal's hardware underlining capability.
XAlso, backspaces which appear between two identical characters
Xare treated specially:
Xthe overstruck text is printed
Xusing the terminal's hardware boldface capability.
XOther backspaces are deleted, along with the preceeding character.
X.IP -w
XNormally,
X.I less
Xuses a tilde character to represent lines past the end of the file.
XThe -w option causes blank lines to be used instead.
X.IP -x
XThe -x\fIn\fR option sets tab stops every \fIn\fR positions.
XThe default for \fIn\fR is 8.
X.IP -[z]
XWhen given a backwards or forwards window command,
X.I less
Xwill by
Xdefault scroll backwards or forwards one screenful of lines.
XThe -z\fIn\fR option changes the default scrolling window size
Xto \fIn\fR lines.
XNote that the "z" is optional for compatibility with
X.I more.
X.IP +
XIf a command line option begins with \fB+\fR,
Xthe remainder of that option is taken to be an initial command to
X.I less.
XFor example, +G tells
X.I less
Xto start at the end of the file rather than the beginning,
Xand +/xyz tells it to start at the first occurence of "xyz" in the file.
XAs a special case, +<number> acts like +<number>g;
Xthat is, it starts the display at the specified line number
X(however, see the caveat under the "g" command above).
XIf the option starts with \fB++\fR, the initial command applies to
Xevery file being viewed, not just the first one.
XThe + command described previously
Xmay also be used to set (or change) an initial command for every file.
X
X.SH "KEY BINDINGS"
XYou may define your own less commands by using the program
X.I lesskey
X(1)
Xto create a file called ".less" in your home directory.
XThis file specifies a set of command keys and an action
Xassociated with each key.
XSee the
X.I lesskey
Xmanual page for more details.
X
X.SH "PROMPTS"
XThe -P option allows you to tailor the prompt to your preference.
XThe string given to the -P option replaces the specified prompt string.
XCertain characters in the string are interpreted specially.
XThe prompt mechanism is rather complicated to provide flexibility,
Xbut the ordinary user need not understand the details of constructing
Xpersonalized prompt strings.
X.sp
XA percent sign followed by a single character is expanded
Xaccording to what the following character is:
X.IP "%bX"
XReplaced by the byte offset into the current input file.
XThe b is followed by a single character (shown as X above)
Xwhich specifies the line whose byte offset is to be used.
XIf the character is a "t", the byte offset of the top line in the
Xdisplay is used,
Xan "m" means use the middle line,
Xa "b" means use the bottom line,
Xand a "B" means use the line just after the bottom line.
X.IP "%f"
XReplaced by the name of the current input file.
X.IP "%i"
XReplaced by the index of the current file in the list of
Xinput files.
X.IP "%lX"
XReplaced by the line number of a line in the input file.
XThe line to be used is determined by the X, as with the %b option.
X.IP "%m"
XReplaced by the total number of input files.
X.IP "%pX"
XReplaced by the percent into the current input file.
XThe line used is determined by the X as with the %b option.
X.IP "%s"
XReplaced by the size of the current input file.
X.IP "%t"
XCauses any trailing spaces to be removed.
XUsually used at the end of the string, but may appear anywhere.
X.IP "%x"
XReplaced by the name of the next input file in the list.
X.PP
XIf any item is unknown (for example, the file size if input
Xis a pipe), a question mark is printed instead.
X.PP
XThe format of the prompt string can be changed
Xdepending on certain conditions.
XA question mark followed by a single character acts like an "IF":
Xdepending on the following character, a condition is evaluated.
XIf the condition is true, any characters following the question mark
Xand condition character, up to a period, are included in the prompt.
XIf the condition is false, such characters are not included.
XA colon appearing between the question mark and the
Xperiod can be used to establish an "ELSE": any characters between
Xthe colon and the period are included in the string if and only if
Xthe IF condition is false.
XCondition characters (which follow a question mark) may be:
X.IP "?a"
XTrue if any characters have been included in the prompt so far.
X.IP "?bX"
XTrue if the byte offset of the specified line is known.
X.IP "?e"
XTrue if at end-of-file.
X.IP "?f"
XTrue if there is an input filename
X(that is, if input is not a pipe).
X.IP "?lX"
XTrue if the line number of the specified line is known.
X.IP "?m"
XTrue if there is more than one input file.
X.IP "?n"
XTrue if this is the first prompt in a new input file.
X.IP "?pX"
XTrue if the percent into the current input file
Xof the specified line is known.
X.IP "?s"
XTrue if the size of current input file is known.
X.IP "?x"
XTrue if there is a next input file
X(that is, if the current input file is not the last one).
X.PP
XAny characters other than the special ones
X(question mark, colon, period, percent, and backslash)
Xbecome literally part of the prompt.
XAny of the special characters may be included in the prompt literally
Xby preceeding it with a backslash.
X.PP
XSome examples:
X.sp
X?f%f:Standard input.
X.sp
XThis prompt prints the filename, if known;
Xotherwise the string "Standard input".
X.sp
X?f%f .?ltLine %lt:?pt%pt\%:?btByte %bt:-...
X.sp
XThis prompt would print the filename, if known.
XThe filename is followed by the line number, if known,
Xotherwise the percent if known, otherwise the byte offset if known.
XOtherwise, a dash is printed.
XNotice how each question mark has a matching period,
Xand how the % after the %pt
Xis included literally by escaping it with a backslash.
X.sp
X?n?f%f\ .?m(file\ %i\ of\ %m)\ ..?e(END)\ ?x-\ Next\\:\ %x..%t
X.sp
XThis prints the filename if this is the first prompt in a file,
Xfollowed by the "file N of N" message if there is more
Xthan one input file.
XThen, if we are at end-of-file, the string "(END)" is printed
Xfollowed by the name of the next file, if there is one.
XFinally, any trailing spaces are truncated.
XThis is the default prompt.
XFor reference, here are the defaults for
Xthe other two prompts (-m and -M respectively).
XEach is broken into two lines here for readability only.
X.nf
X.sp
X?n?f%f\ .?m(file\ %i\ of\ %m)\ ..?e(END)\ ?x-\ Next\\:\ %x.:
X ?pB%pB\\%:byte\ %bB?s/%s...%t
X.sp
X?f%f\ .?n?m(file\ %i\ of\ %m)\ ..?ltline\ %lt\ :byte\ %bB?s/%s\ ..
X ?e(END)\ ?x-\ Next\\:\ %x.:?pB%pB\\%..%t
X.sp
X.fi
XAnd here is the default message produced by the = command:
X.nf
X.sp
X?f%f\ .?m(file\ %i\ of\ %m)\ .?ltline\ %lt\ .
X byte\ %bB?s/%s.\ ?e(END)\ :?pB%pB\\%..%t
X.fi
X
X.SH "SEE ALSO"
Xlesskey(1)
X
X.SH WARNINGS
XThe = command and prompts (unless changed by -P)
Xreport the line number of the line at the top of the screen,
Xbut the byte and percent of the line at the bottom of the screen.
END_OF_FILE
echo shar: Extracting \"lesskey.nro\"
sed "s/^X//" >'lesskey.nro' <<'END_OF_FILE'
X.TH LESSKEY 1
X.SH NAME
Xlesskey \- specify key bindings for less
X.SH SYNOPSIS
X.B "lesskey [-o output] [input]"
X.SH DESCRIPTION
X.I Lesskey
Xis used to specify a set of key bindings to be used by
X.I less.
XThe input file is a text file which describes the key bindings,
Xand the output file is a binary file which is used by
X.I less.
XIf no input file is specified, standard input is used.
XIf no output file is specified, $HOME/.less is used.
X.PP
XThe input file consists of lines of the form:
X.sp
X string <whitespace> action <newline>
X.sp
XWhitespace is any sequence of one or more spaces and/or tabs.
XThe "string" is the command key(s) which invoke the action.
XThe string may be a single command key, or a sequence of up to 15 keys.
XThe "action" is the name of the less action, from the list below.
XThe characters in the "string" may appear literally, or be
Xprefixed by a carat to indicate a control key.
XA backslash may be used to cause the following character
Xto be taken literally.
XCharacters which must be preceeded by backslash include
Xcarat, space, tab and the backslash itself.
XA backslash followed by one to three octal digits may be used to
Xspecify a character by its octal value.
XBlank lines and lines which start with a pound sign (#) are ignored.
X.PP
XAs an example, the following input file describes the set of
Xdefault command keys used by less:
X.sp
X.nf
X k back-line
X y back-line
X ^K back-line
X ^Y back-line
X ^P back-line
X b back-screen
X ^B back-screen
X \\33v back-screen
X u back-scroll
X ^U back-scroll
X ? back-search
X E examine
X ^X^V examine
X + first-cmd
X e forw-line
X j forw-line
X ^E forw-line
X ^J forw-line
X ^M forw-line
X ^N forw-line
X f forw-screen
X ^F forw-screen
X \\40 forw-screen
X ^V forw-screen
X d forw-scroll
X ^D forw-scroll
X / forw-search
X G goto-end
X > goto-end
X \\33> goto-end
X g goto-line
X < goto-line
X \\33< goto-line
X ' goto-mark
X ^X^X goto-mark
X H help
X N next-file
X % percent
X p percent
X P prev-file
X q quit
X ZZ quit
X ^L repaint
X ^R repaint
X r repaint
X R flush-repaint
X n repeat-search
X m set-mark
X ! shell
X = status
X ^G status
X - toggle-option
X _ display-option
X V version
X v visual
X.fi
X.sp
XCommands specified by
X.I lesskey
Xtake precedence over the default commands.
XA default command key may be disabled by including it in the
Xkey file with the action "invalid".
X
X.SH "SEE ALSO"
Xless(1)
END_OF_FILE
echo shar: Extracting \"lesskey.man\"
sed "s/^X//" >'lesskey.man' <<'END_OF_FILE'
X
X
X
X LLLLEEEESSSSSSSSKKKKEEEEYYYY((((1111)))) UUUUNNNNIIIIXXXX 5555....0000 LLLLEEEESSSSSSSSKKKKEEEEYYYY((((1111))))
X
X
X
X NNNNAAAAMMMMEEEE
X lesskey - specify key bindings for less
X
X SSSSYYYYNNNNOOOOPPPPSSSSIIIISSSS
X lllleeeesssssssskkkkeeeeyyyy [[[[----oooo oooouuuuttttppppuuuutttt]]]] [[[[iiiinnnnppppuuuutttt]]]]
X
X DDDDEEEESSSSCCCCRRRRIIIIPPPPTTTTIIIIOOOONNNN
X _L_e_s_s_k_e_y is used to specify a set of key bindings to be used
X by _l_e_s_s. The input file is a text file which describes the
X key bindings, and the output file is a binary file which is
X used by _l_e_s_s. If no input file is specified, standard input
X is used. If no output file is specified, $HOME/.less is
X used.
X
X The input file consists of lines of the form:
X
X string <whitespace> action <newline>
X
X Whitespace is any sequence of one or more spaces and/or
X tabs. The "string" is the command key(s) which invoke the
X action. The string may be a single command key, or a
X sequence of up to 15 keys. The "action" is the name of the
X less action, from the list below. The characters in the
X "string" may appear literally, or be prefixed by a carat to
X indicate a control key. A backslash may be used to cause
X the following character to be taken literally. Characters
X which must be preceeded by backslash include carat, space,
X tab and the backslash itself. A backslash followed by one
X to three octal digits may be used to specify a character by
X its octal value. Blank lines and lines which start with a
X pound sign (#) are ignored.
X
X As an example, the following input file describes the set of
X default command keys used by less:
X
X k back-line
X y back-line
X ^K back-line
X ^Y back-line
X ^P back-line
X b back-screen
X ^B back-screen
X \33v back-screen
X u back-scroll
X ^U back-scroll
X ? back-search
X E examine
X ^X^V examine
X + first-cmd
X e forw-line
X j forw-line
X ^E forw-line
X
X
X
X Page 1 (printed 7/19/88)
X
X
X
X
X
X
X LLLLEEEESSSSSSSSKKKKEEEEYYYY((((1111)))) UUUUNNNNIIIIXXXX 5555....0000 LLLLEEEESSSSSSSSKKKKEEEEYYYY((((1111))))
X
X
X
X ^J forw-line
X ^M forw-line
X ^N forw-line
X f forw-screen
X ^F forw-screen
X \40 forw-screen
X ^V forw-screen
X d forw-scroll
X ^D forw-scroll
X / forw-search
X G goto-end
X > goto-end
X \33> goto-end
X g goto-line
X < goto-line
X \33< goto-line
X ' goto-mark
X ^X^X goto-mark
X H help
X N next-file
X % percent
X p percent
X P prev-file
X q quit
X ZZ quit
X ^L repaint
X ^R repaint
X r repaint
X R flush-repaint
X n repeat-search
X m set-mark
X ! shell
X = status
X ^G status
X - toggle-option
X _ display-option
X V version
X v visual
X
X Commands specified by _l_e_s_s_k_e_y take precedence over the
X default commands. A default command key may be disabled by
X including it in the key file with the action "invalid".
X
X
X SSSSEEEEEEEE AAAALLLLSSSSOOOO
X less(1)
X
X
X
X
X
X
X
X
X
X Page 2 (printed 7/19/88)
X
X
X
END_OF_FILE
--
Please send comp.sources.unix-related mail to rsalz at uunet.uu.net.
More information about the Comp.sources.unix
mailing list