VT100 Emulation for the UNIX PC
Lenny Tropiano
lenny at icus.islp.ny.us
Sun Mar 5 18:04:06 AEST 1989
|From: "Muhammad S. Benten" <sbcs!benten at boulder.colorado.edu>
|Message-Id: <8812300939.AA26417 at tigger>
|
|Dear Lenny,
|
| This is a fast version of the "vtem" public domain program that
|has been posted 3 years ago. This version will compile
|on SYS-5 and is enhanced to use the alternate character sets on
|the Unix-pc.
----------------------CUT HERE --- CUT HERE --------------------
# This is a shell archive. Remove anything before this line,
# then unpack it by saving it in a file and typing "sh file".
#
# Wrapped by benten at benten on Fri Dec 30 01:35:40 MST 1988
# Contents: README vtem.1 Makefile vtem.h vtem.c term.c out.c test.cat
echo x - README
sed 's/^@//' > "README" <<'@//E*O*F README//'
This is hacked version of the "vtem" program. It is intended to
work on the AT&T Unix-pc and provides a vt100 terminal emulation.
It has been enhanced to handle the alternate character set of
the vt100. Other than the alternate character set it should work
fine on any unix machine. To test it cat the file test.cat.
Muhammad S. Benten
boulder.colorado.edu
@//E*O*F README//
chmod u=rw,g=r,o=r README
echo x - vtem.1
sed 's/^@//' > "vtem.1" <<'@//E*O*F vtem.1//'
@.TH VTEM 1 1986-01-24
@.SH NAME
vtem - a VT100 emulator based on termcap
@.SH SYNOPSIS
@.I vtem
@.SH DESCRIPTION
@.I vtem
runs on BSD4.2 and works by starting a sub-shell and then translating
output escape sequences. It's function is limited by the capabilities
listed in the termcap database and the capabilities of the actual
terminal that it is being run on.
It has been tested with Per Lindberg's excellent verifier "vttest" and
has been found to give acceptable results on the following terminals:
Sun windows
@.br
PC-Kermit in h19 emulation mode.
@.br
VT100 (!)
On a Sun, you can use the following Suntools rootmenu entry:
@.nf
"VT100 Tool" shelltool -Ww 80 -Wh 24 -Wl " VT100 Tool" vtem
@.fi
@.SH BUGS
Release 1.0 of vtem has the following bugs and limitations:
Region scroll will only work on terminals with
cs or al/dl.
It will never write in the last position of the screen,
because of the unpredictable behaviour of many terminals.
VT102 capabilities are not yet implemented.
No soft scroll.
132 width not supported.
Input is not translated, which means no function key emulation.
No double height or double width lines.
No alternate character set, meaning no graphics.
No printer support.
No status reports, answerback messages, etc.
No SETUP mode.
No LEDs.
@.SH AUTHOR
Leif Samuelsson
@.br
leif at erisun.UUCP or ..enea!erix!erisun!leif
@//E*O*F vtem.1//
chmod u=rw,g=r,o=r vtem.1
echo x - Makefile
sed 's/^@//' > "Makefile" <<'@//E*O*F Makefile//'
CFLAGS= -O -DUNIXPC
vtem: vtem.o term.o out.o
$(CC) $(CFLAGS) -o vtem vtem.o term.o out.o -ltermcap
@.c.o: ; $(CC) $(CFLAGS) -c $*.c
shar: ; shar README vtem.1 Makefile vtem.h vtem.c term.c out.c test.cat> vtem.shar
@//E*O*F Makefile//
chmod u=rw,g=r,o=r Makefile
echo x - vtem.h
sed 's/^@//' > "vtem.h" <<'@//E*O*F vtem.h//'
#include <stdio.h>
#include <signal.h>
#include <sgtty.h>
#include <sys/types.h>
#include <sys/time.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/termio.h>
#define FALSE 0
#define TRUE 1
typedef short Bool;
extern char *getenv();
extern putchar_x();
extern struct sgttyb oldb, newb;
extern struct termio oldtermio, newtermio;
extern int oldlb, newlb;
extern int master;
extern Bool BS;
extern int CO, LI;
extern char *AL, *BC, *BL, *CD, *CL, *CE, *CM, *CR, *CS, *DL, *DO, *KE, *KS, *MB, *MD, *ME, *MR, *ND, *NL, *SE, *SO, *SR, *TI, *TE, *UE, *UP, *US, *MAL, *MDL;
#define tputs_x(s) (tputs(s, 0, putchar_x))
#define backspace() (tputs_x(BC))
#define clear_screen() (tputs_x(CL))
#define set_cursor(c, r) (tputs_x(tgoto(CM, (c), (r))))
#define linefeed() (tputs_x(NL))
#define cr() (tputs_x(CR))
@//E*O*F vtem.h//
chmod u=rw,g=r,o=r vtem.h
echo x - vtem.c
sed 's/^@//' > "vtem.c" <<'@//E*O*F vtem.c//'
/*
* vt - A termcap driven VT100 emulator for BSD Unix
*
* Version 2.0
*
* Public domain software.
* Written by Leif Samuelsson (leif at erisun) in December, 1985
*
*
*
* Modified to work on SYS-5 Unix and to handle alternate character
* set on the Unix-pc by
* Muhammad S. Benten
* benten at boulder.colorado.edu
* December, 1988
*
*/
#include "vtem.h"
#include <sys/wait.h>
int master, slave, child1,child2;
char linec, linen;
struct termio termio;
int file_pipe[2];
done()
{
union wait status;
if (wait(&status) != child1)
return;
kill(child2,SIGTERM);
setupterm(0);
exit(0);
}
main()
{
/* Strategy: Start three processes, one for input, one for output
* and one shell.
*/
pipe(file_pipe);
setupterm(TRUE);
setup_pty();
if ( (child1 = fork()) == 0 ) {
close(master);
start_shell();
exit(1);
}
if ( (child2 = fork()) == 0 ) {
close(0);
dup(file_pipe[0]);
handle_output();
}
signal(SIGCLD, done);
handle_input();
}
handle_input()
{
char buf[BUFSIZ];
int i,j,k;;
j=open(ttyname(0),4);
while (1) {
i = read(j, buf, BUFSIZ) ;
if ( i > 0 )
write(master, buf, i);
i = read(master,buf,BUFSIZ);
if ( i > 0 )
write(file_pipe[1], buf, i);
}
}
start_shell()
{
int t;
char *cp, shellname[20],shellpgm[100], *strrchr();
if ((cp = getenv("SHELL")) == (char *)0)
strcpy(shellpgm, "sh");
else
strcpy(shellpgm, cp);
if ((cp = (char *) strrchr(shellpgm,'/')) == (char *)0)
strcpy(shellname, shellpgm);
else
strcpy(shellname, &cp[1]);
close(0);
dup(slave);
close(1);
dup(slave);
close(2);
dup(slave);
close(slave);
signal(SIGINT,SIG_DFL);
signal(SIGQUIT,SIG_DFL);
printf("Welcome to the vt100 emulator\n");
execlp(shellpgm, shellname,0);
printf("vtem: Cannot start the shell '%s' \nvtem: Please cheack the SHELL environment variable\n",shellpgm);
sleep(1);
}
setup_pty()
{
char line[11];
for (linec = 'p'; linec <= 'q'; linec++) {
sprintf(line, "/dev/pty%c0", linec);
if (access(line, 0) != 0)
break;
for (linen = 0; linen < 16; linen++) {
sprintf(line, "/dev/pty%c%1x", linec, linen);
master = open(line, 2|4);
if (master >= 0) {
sprintf(line, "/dev/tty%c%1x", linec, linen);
slave = open(line, 2);
if (slave < 0) {
perror(line);
setupterm(0);
exit(1);
}
ioctl(master, TCSETA, (char *)&oldtermio);
return;
}
}
}
perror("pty\n");
setupterm(0);
exit(1);
}
perror(x)
char *x;
{
fprintf(stderr,"vtem: Unknown problem with %s\n",x);
}
@//E*O*F vtem.c//
chmod u=rw,g=r,o=r vtem.c
echo x - term.c
sed 's/^@//' > "term.c" <<'@//E*O*F term.c//'
/*
* vt - A termcap driven VT100 emulator for BSD Unix
*
* Version 2.0
*
* Public domain software.
* Written by Leif Samuelsson (leif at erisun) in December, 1985
*
*
*
* Modified to work on SYS-5 Unix and to handle alternate character set by
* Muhammad S. Benten
* benten at boulder.colorado.edu
* December, 1988
*
*/
/* This module contains termcap and tty routines */
#include "vtem.h"
extern int shiftit;
int shiftit;
extern char *tgetstr(), *tgoto();
/* Variables for saving original terminal parameters */
struct sgttyb oldb, newb;
struct termio oldtermio,newtermio;
int oldlb, newlb, oldl, newl;
/* Terminal attributes */
char tbuf[1024];
Bool BS;
int CO, LI;
char *AL, *BC, *BL, *CD, *CL, *CE, *CM, *CR, *CS, *DL, *DO,
*KE, *KS, *MB, *MD, *ME, *MR, *ND, *NL, *SE, *SO, *SR,
*TI, *TE, *UE, *UP, *US, *MAL, *MDL;
putchar_x(c)
char c;
{
putchar(c);
}
ttycbreak()
{
ioctl(0, TCGETA, &oldtermio);
ioctl(0, TIOCGETP, &newb);
newb.sg_flags |= RAW;
newb.sg_flags &= ~(ECHO);
ioctl(0, TIOCSETP, &newb);
ioctl(0, TCGETA, &newtermio);
newtermio.c_oflag=0;
ioctl(0, TCSETA, &newtermio);
signal(SIGINT,SIG_IGN);
signal(SIGQUIT,SIG_IGN);
}
/* gettermtype - Finds terminal type and reads termcap entry for it.
*/
gettermtype()
{
char tptr[1024];
char *termtyp;
char *tbufptr;
termtyp=getenv("TERM");
switch(tgetent(tptr,termtyp)) {
case -1:
printf("Can't read termcap\n");
exit(1);
case 0:
printf("Can't find your terminal type (%s) in termcap\n", termtyp);
exit(1);
}
tbufptr=tbuf;
AL = tgetstr("al", &tbufptr);
BC = tgetstr("bc", &tbufptr);
BL = tgetstr("bl", &tbufptr);
if (!BL)
BL = "\007";
BS = tgetflag("bs",&tbufptr);
if (!BC && BS)
BC = "\b";
CD = tgetstr("cd", &tbufptr);
CL = tgetstr("cl", &tbufptr);
CE = tgetstr("ce", &tbufptr);
CM = tgetstr("cm", &tbufptr);
CR = tgetstr("cr", &tbufptr);
if (!CR)
CR = "\r";
CS = tgetstr("cs", &tbufptr);
DL = tgetstr("dl", &tbufptr);
DO = tgetstr("do", &tbufptr);
if (!DO)
DO = "\n";
KE = tgetstr("ke", &tbufptr);
KS = tgetstr("ks", &tbufptr);
MB = tgetstr("mb", &tbufptr);
ME = tgetstr("me", &tbufptr);
MR = tgetstr("mr", &tbufptr);
ND = tgetstr("nd", &tbufptr);
NL = tgetstr("nl", &tbufptr);
if (!NL)
NL = "\n";
SO = tgetstr("so", &tbufptr);
SE = tgetstr("se", &tbufptr);
SR = tgetstr("sr", &tbufptr);
TI = tgetstr("ti", &tbufptr);
TE = tgetstr("te", &tbufptr);
UE = tgetstr("ue", &tbufptr);
UP = tgetstr("up", &tbufptr);
US = tgetstr("us", &tbufptr);
MAL = tgetstr("AL", &tbufptr);
MDL = tgetstr("DL", &tbufptr);
CO = tgetnum("co");
LI = tgetnum("li");
if(!TI) {
TI = tgetstr("vs", &tbufptr);
TE = tgetstr("ve", &tbufptr);
}
if (CO < 80 || LI < 24) {
printf("Sorry, but vtem requires 24 by 80 lines.\r\n");
exit(1);
}
if (!CM) {
printf("Sorry, but vtem requires cursor motion capability (cm).\r\n");
exit(1);
}
if (!CL) {
printf("Sorry, but vtem requires clear screen capability (cl).\r\n");
exit(1);
}
if (!UP) {
printf("Sorry, but vtem requires cursor up capability (up).\r\n");
exit(1);
}
}
setupterm(flg) /* If flg==TRUE, set line in cbreak mode and */
Bool flg; /* initialize the terminal,otherwise restore */
{
if (flg) {
ttycbreak();
if (TI)
tputs_x(TI); /* start CM mode */
}
else {
if (KE)
tputs_x(KE); /* Restores Keypad */
if (TE)
tputs_x(TE); /* exit CM mode */
ioctl(0, TIOCSETP, &oldb);
ioctl(0, TCSETA, &oldtermio);
}
}
/* clear_bos - clear from beginning of screen to cursor
*/
clear_bos(c,r)
int c,r;
{
register int i;
for (i=0; i<r; i++) {
tputs_x(tgoto(CM, 0, i));
tputs_x(CE);
}
clear_bol(c,r);
}
/* clear_eos - Clear from cursor to end of screen.
*/
clear_eos()
{
tputs_x(CD);
}
/* clear_bol - Clear from beginning of line to cursor.
*/
clear_bol(c,r)
int c,r;
{
register int i;
tputs_x(tgoto(CM, 0, r));
for (i=0; i<c; i++)
putchar(' ');
}
/* clear_eol - Clear from cursor to end of line.
*/
clear_eol(c, r)
int c, r;
{
register int i;
if (CE)
tputs_x(CE);
else {
for (i=c; i < ((r==23)?79:80); i++)
putchar(' ');
set_cursor(c, r);
}
}
cursor_up()
{
tputs_x(UP);
}
cursor_down()
{
tputs_x(DO);
}
cursor_right()
{
tputs_x(ND);
}
reverse_lf()
{
cursor_up(); /* We hope */
}
/* start_reverse - Set terminal in reverse video mode.
*/
start_reverse()
{
if (MR)
tputs_x(MR);
else
tputs_x(SO);
}
start_blink()
{
tputs_x(MB);
}
start_underline()
{
tputs_x(US);
}
start_bold()
{
if (MD)
tputs_x(MD);
else
tputs_x(SO);
}
ring_bell()
{
tputs_x(BL);
}
scroll_region(lin1, lin2, upward) /* Scroll region between lin1 and */
int lin1, lin2; /* lin2 inclusive one line up or down */
{
/* Use scroll region if available - otherwise use insert/delete line*/
if (CS && SR) {
tputs_x(tgoto(CS,lin2,lin1));
if (upward) {
set_cursor(0,lin2);
tputs_x(NL);
}
else {
set_cursor(0,lin1);
tputs_x(SR);
}
tputs_x(tgoto(CS,23,0));
}
else if (DL && AL) {
if (upward) {
set_cursor(0,lin1);
tputs_x(DL);
set_cursor(0,lin2);
tputs_x(AL);
}
else {
set_cursor(0,lin2);
tputs_x(DL);
set_cursor(0,lin1);
tputs_x(AL);
}
}
}
/* The following are routines for VT102 compatibility
*/
do_insert_line()
{
tputs_x(AL);
}
do_delete_line()
{
tputs_x(DL);
}
/* end_attributes - Reset terminal attributes to normal.
*/
end_attributes()
{
if (ME) {
tputs_x(ME);
if ( shiftit )
tputs_x("\016");
}
else {
tputs_x(SE);
tputs_x(UE);
}
}
@//E*O*F term.c//
chmod u=rw,g=r,o=r term.c
echo x - out.c
sed 's/^@//' > "out.c" <<'@//E*O*F out.c//'
/*
* vt - A termcap driven VT100 emulator for BSD Unix
*
* Version 2.0
*
* Public domain software.
* Written by Leif Samuelsson (leif at erisun) in December, 1985
*
*
*
* Modified to handle alternate character set and for SYS-5 by
* Muhammad S. Benten
* University of Colorado
* Boulder.
* December, 1988
*
*/
#include "vtem.h"
extern int shiftit;
typedef Bool int;
static int row, col, save_row, save_col, top_margin, bottom_margin;
static Bool blink, bold, reverse, underline, save_blink, save_bold,
save_reverse, save_underline, origin_mode, vt52_mode, wrap;
static short tabs[80];
static int arg[10], argno;
/* arow is absolute row, taking top_margin into account */
#define arow (row + (origin_mode ? (top_margin - 1) : 0))
/* nextch - read output and interpret control characters.
* Return first non-control character.
*/
int nextch()
{
register int ch;
while ((ch = getc(stdin)) != EOF) {
switch (ch) {
case '\177':
case '\0':
break;
case '\007': /* Bell */
ring_bell(); break;
case '\b': /* BackSpace */
if (col > 1) {
col--;
backspace();
} break;
case '\t': /* Tab */
while (col < 80 && (tabs[col++] == 0) );
set_cursor(col-1, arow-1); break;
case '\n': /* Line Feed */
do_linefeed(); break;
case '\r': /* Carriage Return */
if (col > 1) {
col = 1;
cr();
} break;
case '\016': /* Ignore shift in/out */
shiftit=1;
putchar(ch);
break;
case '\017':
shiftit=0;
putchar(ch);
break;
default:
return(ch);
}
if (stdin->_cnt == 0)
fflush(stdout);
}
return(ch);
}
/* handle_output - Main loop of output process.
* Reads and dispatches characters from output stream.
*/
handle_output()
{
register int ch;
gettermtype();
do_reset();
while ((ch = nextch()) != EOF) {
if (ch == '\033') { /* Escape character */
if (vt52_mode)
do_vt52_escape();
else
do_ansi_escape();
}
else if (ch >= ' ') { /* Printing character */
if (col == 81) {
if (wrap) {
col = 1;
set_cursor(col-1, arow-1);
do_linefeed();
}
else {
col = 80;
set_cursor(col-1, arow-1);
}
}
if (col == 80) {
if (arow != 24)
putchar(ch); /* Must ignore last pos */
set_cursor(col-1, arow-1);
if (wrap)
col++;
}
else {
putchar(ch);
col++;
}
}
if (stdin->_cnt == 0)
fflush(stdout);
}
exit(0);
}
/* do_ansi_escape - reads and interprets an ANSI escape sequence
*/
do_ansi_escape()
{
register int ch;
if ((ch = nextch()) == EOF)
return;
switch (ch) {
case '#':
do_hash();
break;
case '(':
do_character_sets(0); break;
case ')':
do_character_sets(1); break;
case '7':
save_row = row;
save_col = col;
save_blink = blink;
save_bold = bold;
save_reverse = reverse;
save_underline = underline;
break;
case '8':
if (save_row > 0) {
row = save_row;
col = save_col;
set_cursor(col-1, arow-1);
if (blink = save_blink)
start_blink();
if (bold = save_bold)
start_bold();
if (reverse = save_reverse)
start_reverse();
if (underline = save_underline)
start_underline();
} break;
case 'D':
do_linefeed(); break;
case 'E':
if (col > 1) {
col = 1;
cr();
}
do_linefeed(); break;
case 'H':
tabs[col-1] = 1; break;
case 'M':
do_reverse_lf(); break;
case '[':
do_csi(); break;
case 'c':
do_reset(); break;
}
}
/* do_csi - the real ANSI interpreter
*/
do_csi()
{
register int i, ch;
int private;
if ((ch = nextch()) == EOF)
return;
/* Check if private VT100 esc sequence */
private = 0;
if (ch == '?') {
private++;
if ((ch = nextch()) == EOF)
return;
}
/* Parse arguments */
argno = 0;
while ((ch >= '0' && ch <= '9') || ch == ';') {
arg[argno] = 0;
while (ch >= '0' && ch <= '9') {
arg[argno] = arg[argno] * 10 + (ch - '0');
if ((ch = nextch()) == EOF)
return;
}
if (ch == ';')
if ((ch = nextch()) == EOF)
return;
argno++;
}
if (private) {
if (argno != 1)
return;
switch (ch) {
case 'h':
switch (arg[0]) {
case 6:
origin_mode++; break;
case 7:
wrap++; break;
} break;
case 'l':
switch (arg[0]) {
case 2:
vt52_mode = 1; break;
case 6:
origin_mode = 0; break;
case 7:
wrap = 0; break;
} break;
}
}
else {
switch (ch) {
case 'A':
i = (argno == 1 && arg[0] > 0) ? arg[0] : 1;
while (i-- && row > 1) {
cursor_up();
row--;
} break;
case 'B':
i = (argno == 1 && arg[0] > 0) ? arg[0] : 1;
while (i-- && row < bottom_margin-top_margin+1) {
cursor_down();
row++;
} break;
case 'C':
i = (argno == 1 && arg[0] > 0) ? arg[0] : 1;
while (i-- && col < 80) {
cursor_right();
col++;
} break;
case 'D':
i = (argno == 1 && arg[0] > 0) ? arg[0] : 1;
while (i-- && col > 1) {
backspace();
col--;
} break;
case 'H':
case 'f':
do_set_cursor(); break;
case 'J':
do_erase_in_display(); break;
case 'K':
do_erase_in_line(); break;
case 'L':
do_insert_line(); break;
case 'M':
do_delete_line(); break;
case 'g':
do_clear_tabs(); break;
case 'm':
do_attributes(); break;
case 'r':
do_set_scroll_region();
}
}
}
/* do_vt52_escape - interprets VT52 escape sequences
*/
do_vt52_escape()
{
register int ch;
if ((ch = nextch()) == EOF)
return;
switch (ch) {
case '<':
vt52_mode = 0; break;
case 'A':
if (row > 1) {
cursor_up();
row--;
} break;
case 'B':
if (row < bottom_margin-top_margin+1) {
cursor_down();
row++;
} break;
case 'C':
if (col < 80) {
cursor_right();
col++;
} break;
case 'D':
if (col > 1) {
backspace();
col--;
} break;
case 'H':
row = col = 1;
set_cursor(col-1, arow-1); break;
case 'I':
do_reverse_lf(); break;
case 'J':
clear_eos(); break;
case 'K':
clear_eol(col-1, arow-1); break;
case 'Y':
do_vt52_set_cursor(); break;
}
}
do_set_cursor()
{
if (arg[0] == 0)
arg[0]++;
if (arg[1] == 0)
arg[1]++;
switch (argno) {
case 0:
arg[0] = 1;
argno++;
/* Fall through */
case 1:
arg[1] = 1; /* Correct? */
argno++;
/* Fall through... */
case 2:
row = arg[0];
col = arg[1];
set_cursor(col-1, arow-1);
break;
}
}
do_vt52_set_cursor()
{
register int ch1, ch2;
if ((ch1 = nextch()) == EOF)
return;
if ((ch2 = nextch()) == EOF)
return;
ch1 -= 0x1f;
ch2 -= 0x1f;
if (ch1 >= 1 && ch1 <= 24 && ch2 >= 1 && ch2 <= 80) {
row = ch1;
col = ch2;
set_cursor(col-1, arow-1);
}
}
do_erase_in_display()
{
switch (argno) {
case 0:
arg[0] = 0;
argno++;
/* Fall through */
case 1:
switch (arg[0]) {
case 0:
clear_eos();
break;
case 1:
clear_bos(col-1, arow-1);
break;
case 2:
clear_screen();
set_cursor(col-1, arow-1);
break;
}
break;
}
}
do_erase_in_line()
{
switch(argno) {
case 0:
arg[0] = 0;
argno++;
/* fall through */
case 1:
switch (arg[0]) {
case 0:
clear_eol(col-1, arow-1);
break;
case 1:
clear_bol(col-1, arow-1);
break;
case 2:
cr();
clear_eol(0, arow-1);
set_cursor(col-1, arow-1);
break;
} break;
}
}
do_clear_tabs()
{
register int i;
if (argno == 0)
arg[argno++] = 0;
switch (arg[0]) {
case 0:
tabs[col-1] = 0; break;
case 3:
for (i = 0; i<80; i++)
tabs[i] = 0; break;
}
}
do_attributes()
{
register int i;
if (argno == 0) {
arg[0] = 0;
argno++;
}
for (i=0; i<argno; i++) {
switch (arg[i]) {
case 0:
end_attributes();
bold = underline = blink = reverse = 0;
break;
case 1:
start_bold();
bold++; break;
case 4:
start_underline();
underline++; break;
case 5:
start_blink();
blink++; break;
case 7:
start_reverse();
reverse++; break;
}
}
}
do_set_scroll_region()
{
if (arg[0] == 0)
arg[0]++;
if (arg[1] == 0)
arg[1]++;
switch (argno) {
case 0:
arg[0] = 1;
arg[1] = 24;
argno = 2;
/* Fall through */
case 2:
top_margin = arg[0];
bottom_margin = arg[1];
col = row = 1;
set_cursor(col-1, arow-1);
break;
}
}
do_linefeed()
{
if (arow == bottom_margin) {
scroll_region(top_margin-1, bottom_margin-1, TRUE);
set_cursor(col-1, arow-1);
}
else if (arow < 24) {
row++;
linefeed();
}
}
do_reverse_lf()
{
if (arow == top_margin) {
scroll_region(top_margin-1, bottom_margin-1, FALSE);
set_cursor(col-1, arow-1);
}
else if (arow > 1) {
row--;
reverse_lf();
}
}
do_hash()
{
register int ch, i, j;
if ((ch = nextch()) == EOF)
return;
switch(ch) {
case '8':
for (i=1; i<=24; i++) {
set_cursor(0, i-1);
for (j=1; j <= ((i==24)?79:80); j++)
putchar('E');
}
row = col = 1;
set_cursor(col-1, arow-1); /* Correct? */
break;
}
}
# ifdef UNIXPC
#include <sys/window.h>
#define UK "/usr/lib/wfont/UK.ft"
#define US "/usr/lib/wfont/system.8.ft"
#define LD "/usr/lib/wfont/SCLD.ft"
#define RC "/usr/lib/wfont/ROMC.ft"
#define RG "/usr/lib/wfont/ROMG.ft"
#endif
/* do_characters_sets - Not implemented
*/
do_character_sets(slot)
int slot;
{
#ifdef UNIXPC
char ch;
struct {
short uf_slot;
char uf_name[60];
} ufdata;
sprintf(ufdata.uf_name,US);
ufdata.uf_slot = 0;
ch = nextch(); /* Ignore for now */
switch(ch) {
case 'A':
sprintf(ufdata.uf_name,UK);
ufdata.uf_slot = slot;
break;
case 'B':
sprintf(ufdata.uf_name,US);
ufdata.uf_slot = slot;
break;
case '0':
sprintf(ufdata.uf_name,LD);
ufdata.uf_slot = slot;
break;
case '1':
sprintf(ufdata.uf_name,RC);
ufdata.uf_slot = slot;
break;
case '2':
sprintf(ufdata.uf_name,RG);
ufdata.uf_slot = slot;
break;
}
ioctl(1,WIOCLFONT,&ufdata);
#endif
}
/* do_reset - Reset emulator and screen
*/
do_reset()
{
register int i;
clear_screen();
row = 1;
col = 1;
top_margin = 1;
bottom_margin = 24;
origin_mode = 0;
vt52_mode = 0;
wrap = 1;
save_row = -1; /* So we know we haven't saved */
for (i=0; i<80; i++)
if ((i/8)*8 == i)
tabs[i] =1;
else
tabs[i] =0;
}
@//E*O*F out.c//
chmod u=rw,g=r,o=r out.c
--
Lenny Tropiano ICUS Software Systems [w] +1 (516) 582-5525
lenny at icus.islp.ny.us Telex; 154232428 ICUS [h] +1 (516) 968-8576
{talcott,decuac,boulder,hombre,pacbell,sbcs}!icus!lenny attmail!icus!lenny
ICUS Software Systems -- PO Box 1; Islip Terrace, NY 11752
More information about the Comp.sys.att
mailing list