termcap for Silicon Graphics 4D console

[Trevor Paquette]

In article <243 at shrike.AUSTIN.LOCKHEED.COM>, aihaug at AUSTIN.LOCKHEED.COM (Daniel A Haug) writes:
> I am looking for a termcap entry for the Silicon Graphics 4D console.
> In system V on the SG, this is denoted in terminfo by "iris-ansi".
> However, I need a termcap entry for this for BSD4.3.  Has anyone
> done this.
> 
> Alternatively, has anyone every developed a terminfo to termcap
> translator?
> 
> dan haug
> Internet: haug at austin.lockheed.com
> uucp:     ut-emx!lad-shrike!aihaug


  I use the following for connecting from our 4D/20 to our Sun4 here.
It is loosly based on the vt100 termcap with the appropriate numbers changed.

4d|4d20:\
	:cr=^M:do=^J:nl=^J:bl=^G:co#80:li#66:cl=50*\E[;H\E[2J:\
	:le=^H:bs:am:cm=5*\E[%i%d;%dH:cs=\E[%i%d;%dr:nd=2\E[C:up=2\E[A:\
	:ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\
	:md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:is=\E[1;66r\E[66;1H:\
	:rf=/usr/lib/tabset/vt100:\
	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
	:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:kb=^H:\
	:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:ta=^I:pt:sr=5\EM:vt#3:xn:\
	:sc=\E7:rc=\E8:sf=5\ED:

Make sure that you use a window that is 66x80 lines. If you want to make your
window smaller or larger just change the '66' or '80' values in the termcap 
definition.

  Hope this helps.
       Trev
==============================================================================
               Trevor Paquette/GraphicsLand, Calgary, Alberta                 
 ..uunet!{ubc-cs,utai,alberta}!calgary!paquette          ICBM:51 03 N/114 05 W
 calgary!paquette at cs.ubc.ca      Luminous beings we are, not this crude matter