WREN V disk problems
Liz Allen-Mitchell
elroy!grian.cps.altadena.ca.us!liz at ames.arc.nasa.gov
Fri Dec 9 16:04:23 AEST 1988
I've got a WREN V disk connected to my Sun 3/60 which we think we have
wired correctly, but I can't seem to access. It is jumpered to SCSI
address 1, which we think is target 1. I added a line to the config file
to translate that to sd1, but I don't know if it's right. The relevant
lines are:
# Support for the SCSI-3 host adapter and the on-board SCSI controller
# on several machines (e.g. 3/50). Same device support as above.
#
# controller si0 at vme24d16 ? csr 0x200000 priority 2 vector siintr 0x40
controller si0 at obio ? csr 0x140000 priority 2
disk sd0 at si0 drive 0 flags 0
# Modified line below for WREN V at target 1. -liz 11/7/88
#disk sd1 at si0 drive 1 flags 0
disk sd1 at si0 drive 8 flags 0
But, when I try to format it, format only finds sd0.
I'm also not sure if I have the stuff in /etc/format.dat right. What I have is:
disk_type = "CDC Wren V 94181-702" \
: ctlr = MD21 : fmt_time = 8 \
: cache = 0x11 : trks_zone = 15 : asect = 3 \
: ncyl = 1545 : acyl = 0 : pcyl = 1546 : nhead = 15 : nsect = 52 \
: rpm = 3597 : bpt = 30170
I think that's probably pretty close, but...
Any help would be much appreciated!
- Liz
liz at grian.cps.altadena.ca.us
ames!elroy!grian!liz
More information about the Comp.sys.sun
mailing list