Out of inodes while unbatching news

Buster Irby rli at buster.irby.com
Wed Jul 4 02:07:52 AEST 1990


cpcahil at virtech.uucp (Conor P. Cahill) writes:

>In article <586 at fnx.UUCP> del at fnx.UUCP (Dag Erik Lindberg) writes:
>>
>>    [story of running out of inodes deleted]
>>
>>The details: The system is a Mylex 20 Mhz w/64k cache, 8 MB memory, ATI
>>VGA wonder.  I have unbatched news with no serial ports installed in the
>>system, same problem.  I have tried a DTC RLL card, WD 7000 FASST SCSI card,
>>Adaptec 1542 SCSI, and all have shown the same problem.  I am currently
>>running ISC Unix.  I have stripped down the system to just the video card
>>and the disk controller to try to find this problem.

>The only pertinent portion of this is the Operating system and you don't 
>specify the version.  

>This inode thing is a known bug that as far as I know was fixed in version
>2.0.2 of 386/ix (I have been running news on a partition without running
>out of inodes for a year).

No, it did not.  I ran 2.0.2 for only a few days before the bug reared
its ugly head.  Included below is the patch I received from T. William Wells.
I applied it and it fixed the problem (Thanks again Bill).  The problem
does however appear to have been fixed in version 2.2.

------------------------inode.fix----------------------

From: uunet!twwells.com!bill (T. William Wells)
Date: 16 Oct 89 18:54:06 EDT (Mon)
Subject: Inode bug fix for ISC 2.0.2

Since I've got so many requests for the fix for the inode bug for ISC
2.0.2, I decided to post it. Sorry I've been so slothful on this;
various things popped up and I wasn't able to get it all together.

In case you want to know what this is: there is a kernel bug that, on
occasion, and particularly if you are running a newsfeed, will cause
the file system to think that there are no more free inodes, thus
preventing creation of new files. Running fsck fixes the inode count
but doesn't prevent the problem from occuring again.

The problem is this: there is a "free inode cache" stored in the
superblock for each file system; this block is kept in memory when
the file system is mounted, thus the inode cache permits rapid
allocation of inodes. When the cache is emptied, the kernel tries to
read more inodes from the disk to fill the cache and then retries the
allocate. If the kernel is unable to read more inodes from the disk,
it assumes that there are no more free inodes.

There is an optimization in the allocation code, which depends on the
condition that the lowest free inode is always in the inode cache.
What it does is to start the disk read from that lowest inode,
instead of the first inode. This means that the inode table doesn't
have to always be fully read, for what could be a significant savings
in allocating inodes. (Consider what might happen when almost all
inodes are in use.)

However, the kernel does not maintain that condition properly. It is
possible for the kernel to forget the lowest inode, with the effect
that the kernel tries to read from some place too far in the inode
table, and maybe discovers that there are no free inodes. When that
happens, the kernel clears the available inode count, and the file
system is essentially kaput.

The right fix for this would be to always maintain that condition.
However, a binary patch for that would be tricky at best, and maybe
impossible. A patch that is possible is to have the allocation routine
try from the beginning of the inode table whenever it fails to read
inodes from the disk, relying on the free inode count to tell when
the table is empty. This changes the condition that must be
maintained to: the free inode count must always be accurate. (Having
the free inode count never be larger than the actual number of free
inodes is sufficient for the patch to not cause problems.)

I made a similar patch for Microport SysV/386 3.0e and have been
running it for most of this year without problems. I was asked to
solve this for Interactive 2.0.2 and did so. However, I did the work
on my Microport system, and the enclosed shell script works on that;
it ought to work on an Interactive system but I've not tried this.

With that caveat, here is what you do to patch your kernel. First,
run the shell script. Make sure that it behaved correctly. Then save
a copy of your good kernel and /etc/conf/pack.d/s5/Driver.o. If you
are really paranoid, back up your whole system, though this shouldn't
be necessary. Replace the Driver.o file with the one on /tmp.
Finally, rebuild your kernel. That particular bug should never bite
you again. Further kernel builds will have the bug fixed as well. If
you have any problems, send me e-mail. I'll try to get back to you
quicker than I did with this! If the patch causes some nasty kind of
crash, please post immediately in hopes that others will read your
message before having tried the patch.

in=/etc/conf/pack.d/s5/Driver.o
out=/tmp/Driver.o

# check that we have the right Driver.o file

if [ x"`sum $in`" != x"50880 81 $in" ]; then
	echo "sum failed"
	exit 1
fi
if [ x"`sum -r $in`" != x"33908    81 $in" ]; then
	echo "sum -r failed"
	exit 1
fi

# copy the file and make an appropriate fix

{
	dd ibs=1 obs=1k count=1977
	dd bs=19 count=1 of=/dev/null
	echo '\074\0144\017\0204\0327\0376\0377\0377\0146\c'
	echo '\0307\0207\0324\00\00\00\0144\00\0353\0151\c'
	dd bs=16k
} <$in >$out

# compare the list of differences against the expected differences

cat <<\+ >/tmp/fix$$
  1978  75  74
  1980   0  17
  1981   0 204
  1982   0 327
  1983 164 376
  1984  14 377
  1985 146 377
  1986 307 146
  1987 207 307
  1988 324 207
  1989   0 324
  1992 144   0
  1993   0 144
  1994 353   0
  1995 152 353
  1996 220 151
+
if cmp -l $in $out | cmp -s - /tmp/fix$$; then
	rm /tmp/fix$$
	exit 0
else
	rm /tmp/fix$$
	echo "patch failed"
	exit 1
fi

---
Bill                    { uunet | novavax | ankh | sunvice } !twwells!bill
bill at twwells.com

-- 
Buster Irby  buster!rli



More information about the Comp.unix.i386 mailing list