Does uu/ungetty force S0=1 for dial out lines?

[Bill Irwin]

oli at odbffm.incom.de (Oliver Boehmer) writes:

:In <578 at twg.bc.ca> bill at twg.bc.ca (Bill Irwin) writes:

:>I have come to the realization that the &hayes2400 entry in
:>Dialers was running whenever the port was enabled.  By specifying
:>the hayes1200 dialer, which doesn't set S0, the problem is gone.

:wrong. The entry &hayes2400 is executed when the port is brought up to
:default state, after the connection is finished. uucp executed the
:hayes2400-line (w/o &) via uuchat prior to dialing. Afterwards, it executes
:the &hayes-line.

What you said is true.  What I said is also true.  When I had the
line configured for the hayes2400 dialer, I simply disabled and
enabled the port.  This action turned the AA light back on.  It
seems that whenever another process is finished with the port
, or the port is enabled, the uugetty runs uuchat which looks for
an "&" version of the dialer entry.

:Oliver Boehmer, Frankfurt, Germany    uucp:   oli at odbffm.incom.de
-- 
Bill Irwin    -       The Westrheim Group     -    Vancouver, BC, Canada
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
uunet!van-bc!twg!bill     (604) 431-9600 (voice) |     Your Computer  
bill at twg.bc.ca            (604) 430-4329 (fax)   |    Systems Partner