Returned mail: Host unknown

[Mail Delivery Subsystem]

   ----- Transcript of session follows -----
550 JBANKERT at SUVM.BITNET... Host unknown

   ----- Unsent message follows -----
Received: by pogo.gnu.ai.mit.edu (5.65/4.0)
	id <AA02211 at pogo.gnu.ai.mit.edu>; Wed, 20 Mar 91 22:46:43 -0500
From: splee at gnu.ai.mit.edu (Seng-Poh Lee, Speedy)
Message-Id: <9103210346.AA02211 at pogo.gnu.ai.mit.edu>
Subject: Checkmail
To: JBANKERT at SUVM.BITNET
Date: Wed, 20 Mar 91 22:46:42 WET
Return-Receipt-To: splee at gnu.ai.mit.edu
X-Mailer: ELM [version 2.3 PL0]

THis is checkmail. I received several messages from you today and replied. I had
also replied to your previous mail, but it bounced. If you didn't get my mail
today, let me know at lee%splee.uucp at hsi.com

Right now, the best e-mail address for me would be;
lee%gdc.portal.com at fernwood.mpk.ca.us  with a cc to lee%splee.uucp at hsi.com

Please ack to both addresses.

Seng-Poh Lee


>From gdc!lee at nova.unix.portal.com Fri Mar 22 17:51:45 1991
Received: from apple-gunkies.gnu.ai.mit.edu by albert.gnu.ai.mit.edu (5.65/4.0) with SMTP
	id <AA04306 at albert.gnu.ai.mit.edu>; Fri, 22 Mar 91 17:51:42 -0500
Received: from portal.COM by apple-gunkies.gnu.ai.mit.edu (5.65/4.0) with SMTP
	id <AA26735 at apple-gunkies.gnu.ai.mit.edu>; Fri, 22 Mar 91 17:52:51 GMT
Received: by nova.unix.portal.com (3.1.18.162)
	id m0jJv0M-0000oXC; Fri, 22 Mar 91 14:54 PST
Received: by portal.unix.portal.com (1.119) 
	id AA24195; Fri, 22 Mar 91 14:54:41 PST
Message-Id: <9103222254.AA24195 at portal.unix.portal.com>
Received: by gdc.portal.com (DECUS UUCP w/Smail);
          Fri, 22 Mar 91 17:35:35 EDT
Date: Fri, 22 Mar 91 17:35:35 EDT
From: Seng-Poh at gnu.ai.mit.edu, Lee at portal, Gen at gnu.ai.mit.edu, DataComm at portal,
        +1 203 758-1811 <lee at gdc.portal.com>
To: splee at gnu.ai.mit.edu
Subject: vpix posting
Status: R

I am having some problems with VPix regarding my B: drive. I have a
1.2M 5 1/4" A: drive and a 1.44M 3 1/2" B: drive. My cmos
configuration is set up that way. In the users vpix.cnf, I set A: to
/dev/rfd096s15 and B: to rfd1135s18 but everytime I bring up vpix, it
always say General Failure on drive B:. I can access drive B: fine
from Xenix, and A: drive works fine under vpix. Any suggestions?

Now, heres the funny thing. When I use a DOS utility under vpix to look
at my cmos configuration, it tells me I have two 1.2M drives! What gives?
Could that be my problem, and if so, how do I get vpix to correctly
pick up my cmos values.

On another unrelated issue, is there any way I can make vpix boot from
a psuedo D: drive instead of C:? The way it is now, vpix takes the C:
drive, which means I can only access my DOS partiton C: drive as D: or
higher. This kind of messes up all my programs configuration, batch
files etc!

TIA for any help.

-----
Seng-Poh Lee				Work:	lee at gdc.portal.com
Technology Center			...!uunet!portal!gdc!lee
General DataComm Ind. Inc.		Home:	lee%splee.uucp at hsi.com
Middlebury, CT				...!uunet!hsi!splee!lee
+-------------------------------------------------------------------------+
|                                                                         |
|                   T H I S   S P A C E  F O R  R E N T                   |
|                                                                         |
+-------------------------------------------------------------------------+