LaserJet printercap for BSD 4.2?
Dave Martindale
dmmartindale at watcgl.UUCP
Thu Nov 22 02:52:46 AEST 1984
> In article <1165 at umcp-cs.UUCP> chris at umcp-cs.UUCP (Chris Torek) writes:
> >Sigh. You can't *get* an 8 bit data path *and* flow control in
> >standard 4.2BSD. If you have some wizards lying around (``Heeeerrre,
> >wizard! Good boy! Here's your CPU crunchon snack'') you can hack in a
> >``lightly browned'' mode to do this.
>
> Did they really take "litout" out of the 4.2BSD tty driver?
Depends on what you want. You can get a full 8-bit path on OUTPUT with
flow control just by setting LITOUT. You can get a full 8-bit path with
flow control on INPUT if you hack the driver a bit to support TANDEM
even in RAW mode. But you cannot get an 8 bit data path in BOTH directions
with flow control at all, ever. The problem is fundamental: if you
receive an XON or XOFF, how do you decide if it is part of the data or
a flow control instruction from the other machine? You just cannot
transmit flow-control instructions along with all-256-codes-valid data
on the same wire without some sort of additional encoding being done.
More information about the Comp.unix
mailing list