v07i088: Public-domain TAR program

sources-request at mirror.UUCP sources-request at mirror.UUCP
Thu Dec 11 04:31:17 AEST 1986


Submitted by: ihnp4!hoptoad!gnu (John Gilmore)
Mod.sources: Volume 7, Issue 88
Archive-name: pdtar

----------CUT HERE----------
: To unbundle, sh this file
echo README 1>&2
cat >README <<'@@@ Fin de README'
This is a public domain tar(1) replacement.  It implements the 'c',
'x', and 't' commands of Unix tar, and many of the options.  It creates
P1003 "Unix Standard" [draft 6] tapes by default, and can read and
write both old and new formats.  It can decompress tar archives when
reading them from disk files (using the 'z' option), but cannot do so
when writing, or when reading from a tape drive.  Its verbose output
looks more like "ls -l" than the Unix tar, and even lines up the
columns.  It is a little better at reading damaged tapes than Unix tar.

It is designed to be a lot more efficient than the standard Unix tar;
it does as little bcopy-ing as possible, and does file I/O in large
blocks.  On the other hand, it has not been timed or performance-tuned;
it's just *designed* to be faster.

On the Sun, the tar archives it creates under the 'old' option are
byte-for-byte the same as those created by /bin/tar, except the trash
at the end of each file and at the end of the archive.

It was written and initially debugged on a Sun Workstation running
4.2BSD.  It has been run on Xenix, Unisoft, Vax 4.2BSD, V7, and USG
systems.  I'm interested in finding people who will port it to other
types of (Unix and non-Unix) systems, use it, and send back the
changes; and people who will add the obscure tar options that they
happen to use and I don't.  In particular, VMS, MSDOS, Mac, Atari and
Amiga versions would be handy.

It still has a number of loose ends, marked by "FIXME" comments in the
source.  For example, it does not chown() extracted files.  Fixes to
these things are also welcome.

I am the author of all the code in this program.  I hereby place it in
the public domain.  If you modify it, or port it to another system,
please send me back a copy, so I can keep a master source.

	John Gilmore
	Nebula Consultants
	1504 Golden Gate Ave.
	San Francisco, California, USA  94115
	+1 415 931 4667		voice
	hoptoad!gnu		data
	jgilmore at lll-crg.arpa	data
Hoptoad talks to sun, ptsfa, well, lll-crg, ihnp4, cbosgd, ucsfcgl, pyramid.

@(#)README 1.5	86/10/29
@@@ Fin de README
echo PORTING 1>&2
cat >PORTING <<'@@@ Fin de PORTING'
		Porting hints for public domain tar
		  John Gilmore, ihnp4!hoptoad!gnu
		     @(#)PORTING 1.5	86/10/29

The Makefile should be edited to comment out all the undesired
versions, and create the following configuration lines for the system
you are compiling it on:

DEFS = the proper #define's to conditionally compile for
your system.
LIBS = the system libraries and/or object modules to link
with the program.
LINTFLAGS = a good strong way to invoke 'lint' on your system.
DEF_AR_FILE = the name of the default archive file on your system.
It should be enclosed in quoted quotes, e.g. \"/dev/foo\" .
DEFBLOCKING = the default blocking factor on your system.

A copy of "getopt", the standard argument parser, is required.  It's in
libc on Missed'em V systems and 4.3BSD; on most other systems, you'll
need a copy of a public domain getopt, available through mod.sources
or the AT&T Toolchest if you can't find it elsewhere.

A copy of the Berkeley directory access routines is also required.
These are in libc and <sys/dir.h> on Berkeley systems.  A public domain
version is available through mod.sources.  There is an #include you
have to change in create.c for this, to set the name of the include
file you have.  Some systems have the include file in <sys/ndir.h>.
You'll have to find it on your system, or get the public domain one
and place it somewhere.

Grep for FIXME to find places that aren't finished or which have
portability problems.  Also see the file TODO.
@@@ Fin de PORTING
echo Makefile 1>&2
cat >Makefile <<'@@@ Fin de Makefile'
# Makefile for public domain tar program.
# @(#)Makefile 1.13	86/10/29

# Berserkeley version
DEFS = -DBSD42
LIBS = 
LINTFLAGS = -abchx
DEF_AR_FILE = \"/dev/rmt8\"
DEFBLOCKING = 20

# USG version
#DEFS = -DUSG
#LIBS = -lndir
#LINTFLAGS = -bx
#DEF_AR_FILE = \"/dev/rmt8\"
#DEFBLOCKING = 20

# UniSoft's Uniplus SVR2 with NFS
#DEFS = -DUSG -DUNIPLUS -DNFS -DSVR2
#LIBS = -lndir
#LINTFLAGS = -bx
#DEF_AR_FILE = \"/dev/rmt8\"
#DEFBLOCKING = 20

# V7 version
#DEFS = -DV7 -Dvoid=int
#LIBS = -lndir
#LINTFLAGS = -abchx
#DEF_AR_FILE = \"/dev/rmt8\"
#DEFBLOCKING = 20

CFLAGS = $(COPTS) $(DEFS) \
	-DDEF_AR_FILE=$(DEF_AR_FILE) \
	-DDEFBLOCKING=$(DEFBLOCKING)
# next line for Debugging
COPTS = -g
# next line for Production
#COPTS = -O

# Add things here like getopt, readdir, etc that aren't in your
# standard libraries.
SUBSRC=	
SUBOBJ=	

SRCS =	tar.c create.c extract.c buffer.c getoldopt.c list.c names.c \
	port.c $(SUBSRC)
OBJS = 	tar.o create.o extract.o buffer.o getoldopt.o list.o names.o \
	port.o $(SUBOBJ)
AUX =	README PORTING Makefile TODO tar.1 tar.5 tar.h port.h

tar:	$(OBJS)
	cc -o tar $(COPTS) $(OBJS) $(LIBS)

lint:	$(SRCS)
	lint $(LINTFLAGS) $(CFLAGS) $(SRCS)

clean:
	rm -f errs *.o tar

tar.shar: $(SRCS) $(AUX)
	shar >tar.shar $(AUX) $(SRCS)

tar.tar.Z: $(SRCS) $(AUX)
	/bin/tar cf - $(AUX) $(SRCS) | compress -v >tar.tar.Z

$(OBJS): tar.h port.h
@@@ Fin de Makefile
echo TODO 1>&2
cat >TODO <<'@@@ Fin de TODO'
@(#) TODO 1.6 86/10/29

Install new mkdir from the net for non-Berkeley systems.

Look at SUID, SGID; look at -p and -m options.  (test them).

Handle owner/group on extraction.

creation of links and symlinks doesn't follow the -k (f_keep) guidelines;
if the file already exists, it is not replaced, even though no -k.

Check stderr and stdout for errors after writing, and quit if so.

Compression option to automatically pipe thru compress (both input&output).
(Need a 3rd process to reblock compress's output for output case, and when
reading from tape drives.)

Preliminary design of Multifile option to handle EOFs on input and output.
Multifile can just write EOF when it hits end of archive, and ask for
archive to be changed.  Start off 2nd archive medium with odd header
block, duplicating original, but with offset to start of data spec'd.
Reading such a header causes tar non-'M' to complain while extracting
(but to seek there and do it anyway!)  Big win -- this works on
cartridge tapes, should work on floppies, might work on magtape.
It would encourage the *&%#$ systems programmers to fix their drivers, too!

Profile it and see where the time, call counts, etc are going.

Test reading compressed tapes with odd blocksizes.
(real tape drives, that is...)
(may need buffer proc no matter what.)

Fix directory timestamps after inserting files into them.  Wait til next
file that's not in the directory.  Need a stack of them.

Add option to delete N matching(?) chars from the front of a file to
be extracted/listed.  Great for reading tapes written with names starting
from "/"...

Option to seek the input file (in skip_file) rather than reading
and tossing it?  (Could just jump in buffer if stuff is in core.)
Could misalign archive reads versus filesys and slow it down, who knows?

Add -C option for creating from odd directories a la 4.2BSD?

Break out odd bits of code into separate support modules.

Add the r, u, X, l, F, C, and digit options of Unix tar.
@@@ Fin de TODO
echo tar.1 1>&2
cat >tar.1 <<'@@@ Fin de tar.1'
.TH TAR 1 "31 October 1986"
.SH NAME
tar \- tape (or other media) file archiver
.SH SYNOPSIS
\fBtar\fP \-[\fBBcDhikmopstvxzZ\fP]
[\fB\-b\fP \fIN\fP]
[\fB\-f\fP \fIF\fP]
[\fB\-T\fP \fIF\fP]
[ \fIfilename\fP\| .\|.\|.  ]
.SH DESCRIPTION
\fItar\fP provides a way to store many files into a single archive,
which can be kept in another Unix file, stored on an I/O device
such as tape, floppy, cartridge, or disk, or piped to another program.
It is useful for making backup copies, or for packaging up a set of
files to move them to another system.
.LP
\fItar\fP has existed since Version 7 Unix with very little change.
It has been proposed as the standard format for interchange of files
among systems that conform to the P1003 ``Portable Operating System''
standard.
.LP
This version of \fItar\fP supports the extensions which
were proposed in the P1003 draft standards, including owner and group
names, and support for named pipes, fifos, and block and character devices.
.LP
When reading an archive, this version of \fItar\fP continues after
finding an error.  Previous versions required the `i' option to ignore
checksum errors.
.SH OPTIONS
\fItar\fP options can be specified in either of two ways.  The usual
Unix conventions can be used: each option is preceded by `\-'; arguments
directly follow each option; multiple options can be combined behind one `\-'
as long as they take no arguments.  For compatability with the Unix
\fItar\fP program, the options may also be specified as ``keyletters,''
wherein all the option letters occur in the first argument to \fItar\fP,
with no `\-', and their arguments, if any, occur in the second, third, ...
arguments.  Examples:
.LP
Normal:  tar -f arcname -cv file1 file2
.LP
Old:  tar fcv arcname file1 file2
.LP
At least one of the \fB\-c\fP, \fB\-t\fP, or \fB\-x\fP options
must be included.  The rest are optional.
.LP
Files to be operated upon are specified by a list of file names, which
follows the option specifications (or can be read from a file by the
\fB\-T\fP option).  Specifying a directory name causes that directory
and all the files it contains to be (recursively) processed.  In general,
specifying full path names when creating an archive is a bad idea,
since when the files are
extracted, they will have to be extracted into exactly where they were
dumped from.  Instead, \fIcd\fP to the
root directory and use relative file names.
.IP "\fB\-b\fP \fIN\fP"
Specify a blocking factor for the archive.  The block size will be
\fIN\fP x 512 bytes.  Larger blocks typically run faster and let you
fit more data on a tape.  The default blocking factor is set when
\fItar\fP is compiled, and is typically 20.  There is no limit to the
maximum block size, as long as enough memory can be allocated for it,
and as long as the device containing the archive can read or write
that block size.
.IP \fB\-B\fP
When reading an archive, reblock it as we read it.
Normally, \fItar\fP reads each
block with a single \fIread(2)\fP system call.  This does not work
when reading from a pipe or network socket under Berkeley Unix.
With this option, it
will do multiple \fIread(2)\fPs until it gets enough data to fill 
the specified block size.  \fB\-B\fP can also be used to speed up
the reading of tapes that were written with small blocking factors,
by specifying a large blocking factor with \fB\-b\fP and having \fItar\fP
read many small blocks into memory before it tries to process them.
.IP \fB\-c\fP
Create an archive from a list of files.
.IP \fB\-D\fP
With each message that \fItar\fP produces, print the record number
within the archive where the message occurred.  This option is especially
useful when reading damaged archives, since it helps to pinpoint the damaged
section.
.IP "\fB\-f\fP \fIF\fP"
Specify the filename of the archive.  If the specified filename is ``\-'',
the archive is read from the standard input or written to the standard output.
If this option is not used,
a default archive name (which was picked when tar was compiled) is used.
The default is normally set to the ``first'' tape drive or other transportable
I/O medium on the system.
.IP \fB\-h\fP
When creating an archive, if a symbolic link is encountered, dump
the file or directory to which it points, rather than
dumping it as a symbolic link.
.IP \fB\-i\fP
When reading an archive, ignore blocks of zeros in the archive.  Normally
a block of zeros indicates the end of the archive,
but in a damaged archive, or one which was
created by appending several archives, this option allows \fItar\fP to 
continue.  It is not on by default because there is garbage written after the
zeroed blocks by the Unix \fItar\fP program.
.IP \fB\-k\fP
When extracting files from an archive, keep existing files, rather than
overwriting them with the version from the archive.
.IP \fB\-m\fP
When extracting files from an archive, set each file's modified timestamp
to the current time, rather than extracting each file's modified
timestamp from the archive.
.IP \fB\-o\fP
When creating an archive, write an old format archive, which does not
include information about directories, pipes, or device files, and 
specifies file ownership by uid's and gid's rather than by
user names and group names.  In most cases, a ``new'' format archive
can be read by an ``old'' tar program without serious trouble, so this
option should seldom be needed.
.IP \fB\-p\fP
When extracting files from an archive, restore them to the same permissions
that they had in the archive.  If \fB\-p\fP is not specified, the current
umask limits the permissions of the extracted files.  See \fIumask(2)\fP.
.IP \fB\-t\fP
List a table of contents of an existing archive.  If file names are
specified, just list files matching the specified names.
.IP \fB\-s\fP
When specifying a list of filenames to be listed
or extracted from an archive,
the \fB\-s\fP flag specifies that the list
is sorted into the same order as the tape.  This allows a large list
to be used, even on small machines, because
the entire list need not be read into memory at once.  Such a sorted
list can easily be created by running ``tar \-t'' on the archive and
editing its output.
.IP "\fB\-T\fP \fIF\fP"
Rather than specifying the file names to operate on as arguments to
the \fItar\fP command, this option specifies that the file names should
be read from the file \fIF\fP, one per line.
If the file name specified is ``\-'',
the list is read from the standard input.
This option, in conjunction with the \fB\-s\fP option,
allows an arbitrarily large list of files to be processed, 
and allows the list to be piped to \fItar\fP.
.IP \fB\-v\fP
Be verbose about the files that are being processed or listed.  Normally,
archive creation or file extraction are silent, and archive listing just
gives file names.  The \fB\-v\fP option causes an ``ls \-l''\-like listing
to be produced.
.IP \fB\-x\fP
Extract files from an existing archive.  If file names are
specified, just extract files matching the specified names, otherwise extract
all the files in the archive.
.IP "\fB\-z\fP or \fB\-Z\fP"
When extracting or listing an archive,
these options specify
that the archive should be decompressed while it is read, using the \-d
option of the \fIcompress(1)\fP program.  The archive itself is not
modified.
.SH "SEE ALSO"
shar(1), tar(5), compress(1), ar(1), arc(1), cpio(1), dump(8), restore(8),
restor(8)
.SH BUGS
The \fBr, u, w, X, l, F, C\fP, and \fIdigit\fP options of Unix \fItar\fP
are not supported.
.LP
It should be possible to create a compressed archive with the \fB\-z\fP option.
.LP
@@@ Fin de tar.1
echo tar.5 1>&2
cat >tar.5 <<'@@@ Fin de tar.5'
.TH TAR 5 "31 October 1986"
.SH NAME
tar \- tape (or other media) archive file format
.SH DESCRIPTION
A ``tar tape'' or file contains a series of records.  Each record contains
TRECORDSIZE bytes (see below).  Although this format may be thought of as
being on magnetic tape, other media are often used.
Each file archived is represented by a header record
which describes the file, followed by zero or more records which give the
contents of the file.  At the end of the archive file there may be a record
filled with binary zeros as an end-of-file indicator.  A conforming
system must write a record of zeros at the end, but must not assume that
an end-of-file record exists when reading an archive.

The records may be blocked for physical I/O operations.  Each block of
\fIN\fP records (where \fIN\fP is set by the \fB\-b\fP option to \fItar\fP)
is written with a single write() operation.  On
magnetic tapes, the result of such a write is a single tape record.
When writing an archive, the last block of records shall be written
at the full size, with records after the zero record containing
undefined data.  When reading an archive, a confirming system shall
properly handle an archive whose last block is shorter than the rest.

The header record is defined in the header file <tar.h> as follows:
.nf
.sp .5v
.DT
/*
 * Standard Archive Format - Standard TAR - USTAR
 */
#define	RECORDSIZE	512
#define	NAMSIZ	100
#define	TUNMLEN	32
#define	TGNMLEN	32

union record {
	char		charptr[RECORDSIZE];
	struct header {
		char	name[NAMSIZ];
		char	mode[8];
		char	uid[8];
		char	gid[8];
		char	size[12];
		char	mtime[12];
		char	chksum[8];
		char	linkflag;
		char	linkname[NAMSIZ];
		char	magic[8];
		char	uname[TUNMLEN];
		char	gname[TGNMLEN];
		char	devmajor[8];
		char	devminor[8];
	} header;
};

/* The checksum field is filled with this while the checksum is computed. */
#define	CHKBLANKS	"        "		/* 8 blanks, no null */

/* The magic field is filled with this if uname and gname are valid. */
#define	TMAGIC	"ustar  "		/* 7 chars and a null */

/* The linkflag defines the type of file */
#define	LF_OLDNORMAL '\\0'		/* Normal disk file, Unix compatible */
#define	LF_NORMAL	'0'		/* Normal disk file */
#define	LF_LINK	'1'		/* Link to previously dumped file */
#define	LF_SYMLINK	'2'		/* Symbolic link */
#define	LF_CHR	'3'		/* Character special file */
#define	LF_BLK	'4'		/* Block special file */
#define	LF_DIR		'5'		/* Directory */
#define	LF_FIFO	'6'		/* FIFO special file */
#define	LF_CONTIG	'7'		/* Contiguous file */
/* Further link types may be defined later. */

/* Bits used in the mode field - values in octal */
#define	TSUID		04000		/* Set UID on execution */
#define	TSGID		02000		/* Set GID on execution */
#define	TSVTX		01000		/* Save text (sticky bit) */

/* File permissions */
#define	TUREAD	00400		/* read by owner */
#define	TUWRITE	00200		/* write by owner */
#define	TUEXEC	00100		/* execute/search by owner */
#define	TGREAD	00040		/* read by group */
#define	TGWRITE	00020		/* write by group */
#define	TGEXEC	00010		/* execute/search by group */
#define	TOREAD	00004		/* read by other */
#define	TOWRITE	00002		/* write by other */
#define	TOEXEC	00001		/* execute/search by other */
.fi
.LP
All characters in header records
are represented using 8-bit characters in the local
variant of ASCII.
Each field within the structure is contiguous; that is, there is
no padding used within the structure.  Each character on the archive medium
is stored contiguously.

Bytes representing the contents of files (after the header record
of each file) are not translated in any way and
are not constrained to represent characters or to be in any character set.
The \fItar\fP(5) format does not distinguish text files from binary
files, and no translation of file contents should be performed.

The fields \fIname, linkname, magic, uname\fP, and \fIgname\fP are
null-terminated
character strings.  All other fields are zero-filled octal numbers in
ASCII.  Each numeric field (of width \fIw\fP) contains \fIw\fP-2 digits, a space, and
a null, except \fIsize\fP and \fImtime\fP,
which do not contain the trailing null.

The \fIname\fP field is the pathname of the file, with directory names
(if any) preceding the file name, separated by slashes.

The \fImode\fP field provides nine bits specifying file permissions and three
bits to specify the Set UID, Set GID and Save Text (TSVTX) modes.  Values
for these bits are defined above.  When special permissions are required
to create a file with a given mode, and the user restoring files from the
archive does not hold such permissions, the mode bit(s) specifying those
special permissions are ignored.  Modes which are not supported by the
operating system restoring files from the archive will be ignored.
Unsupported modes should be faked up when creating an archive; e.g.
the group permission could be copied from the `other' permission.

The \fIuid\fP and \fIgid\fP fields are the user and group ID of the file owners,
respectively.

The \fIsize\fP field is the size of the file in bytes; linked files are archived
with this field specified as zero.

The \fImtime\fP field is the modification time of the file at the time it was
archived.  It is the ASCII representation of the octal value of the
last time the file was modified, represented as in integer number of
seconds since January 1, 1970, 00:00 Coordinated Universal Time.

The \fIchksum\fP field is the ASCII representaion of the octal value of the
simple sum of all bytes in the header record.  Each 8-bit byte in the
header is treated as an unsigned value.  These values are added to an
unsigned integer, initialized to zero, the precision of which shall be no
less than seventeen bits.  When calculating the checksum, the \fIchksum\fP
field is treated as if it were all blanks.

The \fItypeflag\fP field specifies the type of file archived.  If a particular
implementation does not recognize or permit the specified type, the file
will be extracted as if it were a regular file.  As this action occurs,
\fItar\fP issues a warning to the standard error.
.IP "LF_NORMAL or LF_OLDNORMAL"
represents a regular file.
For backward compatibility, a \fItypeflag\fP value of LF_OLDNORMAL
should be silently recognized as a regular file.  New archives should
be created using LF_NORMAL.
Also, for backward
compatability, \fItar\fP treats a regular file whose name ends
with a slash as a directory.
.IP LF_LINK
represents a file linked to another file, of any type,
previously archived.  Such files are identified (in Unix) by each file
having the same device and inode number.  The linked-to
name is specified in the \fIlinkname\fP field with a trailing null.
.IP LF_SYMLINK
represents a symbolic link to another file.  The linked-to
name is specified in the \fIlinkname\fP field with a trailing null.
.IP "LF_CHR or LF_BLK"
represent character special files and block
special files respectively.
In this case the \fIdevmajor\fP and \fIdevminor\fP
fields will contain the
major and minor device numbers respectively.  Operating
systems may map the device specifications to their own local
specification, or may ignore the entry.
.IP LF_DIR
specifies a directory or sub-directory.  The directory name
in the \fIname\fP field should end with a slash.
On systems where
disk allocation is performed on a directory basis the \fIsize\fP
field will contain the maximum number of bytes (which may be
rounded to the nearest disk block allocation unit) which the
directory may hold.  A \fIsize\fP field of zero indicates no such
limiting.  Systems which do not support limiting in this
manner should ignore the \fIsize\fP field.
.IP LF_FIFO
specifies a FIFO special file.  Note that the archiving of
a FIFO file archives the existence of this file and not its
contents.
.IP LF_CONTIG
specifies a contiguous file, which is the same as a normal
file except that, in operating systems which support it,
all its space is allocated contiguously on the disk.  Operating
systems which do not allow contiguous allocation should silently treat
this type as a normal file.
.IP "`A' \- `Z'"
are reserved for custom implementations.  None are used by this
version of the \fItar\fP program.
.IP \fIother\fP
values are reserved for specification in future revisions of the
P1003 standard, and should not be used by any \fItar\fP program.
.LP
The \fImagic\fP field indicates that this archive was output in the P1003
archive format.  If this field contains TMAGIC, then the
\fIuname\fP and \fIgname\fP
fields will contain the ASCII representation of the owner and group of the
file respectively.  If found, the user and group ID represented by these
names
will be used rather than the values contained
within the \fIuid\fP and \fIgid\fP fields.
User names longer than TUNMLEN-1 or group
names longer than TGNMLEN-1 characters will be truncated.
.SH "SEE ALSO"
tar(1), ar(5), cpio(5)
.SH BUGS
Names or link names longer than NAMSIZ-1 characters cannot be archived.

This format does not address multi-volume archives.
.SH NOTES
This manual page was adapted by John Gilmore
from Draft 6 of the P1003 specification
@@@ Fin de tar.5
echo tar.h 1>&2
cat >tar.h <<'@@@ Fin de tar.h'
/*
 * Header file for public domain tar (tape archive) program.
 *
 * @(#)tar.h 1.20 86/10/29	Public Domain.
 *
 * Created 25 August 1985 by John Gilmore, ihnp4!hoptoad!gnu.
 */

/*
 * Kludge for handling systems that can't cope with multiple
 * external definitions of a variable.  In ONE routine (tar.c),
 * we #define TAR_EXTERN to null; here, we set it to "extern" if
 * it is not already set.
 */
#ifndef TAR_EXTERN
#define TAR_EXTERN extern
#endif

/*
 * Header block on tape.
 *
 * I'm going to use traditional DP naming conventions here.
 * A "block" is a big chunk of stuff that we do I/O on.
 * A "record" is a piece of info that we care about.
 * Typically many "record"s fit into a "block".
 */
#define	RECORDSIZE	512
#define	NAMSIZ	100
#define	TUNMLEN	32
#define	TGNMLEN	32

union record {
	char		charptr[RECORDSIZE];
	struct header {
		char	name[NAMSIZ];
		char	mode[8];
		char	uid[8];
		char	gid[8];
		char	size[12];
		char	mtime[12];
		char	chksum[8];
		char	linkflag;
		char	linkname[NAMSIZ];
		char	magic[8];
		char	uname[TUNMLEN];
		char	gname[TGNMLEN];
		char	devmajor[8];
		char	devminor[8];
	} header;
};

/* The checksum field is filled with this while the checksum is computed. */
#define	CHKBLANKS	"        "	/* 8 blanks, no null */

/* The magic field is filled with this if uname and gname are valid. */
#define	TMAGIC		"ustar  "	/* 7 chars and a null */

/* The linkflag defines the type of file */
#define	LF_OLDNORMAL	'\0'		/* Normal disk file, Unix compat */
#define	LF_NORMAL	'0'		/* Normal disk file */
#define	LF_LINK		'1'		/* Link to previously dumped file */
#define	LF_SYMLINK	'2'		/* Symbolic link */
#define	LF_CHR		'3'		/* Character special file */
#define	LF_BLK		'4'		/* Block special file */
#define	LF_DIR		'5'		/* Directory */
#define	LF_FIFO		'6'		/* FIFO special file */
#define	LF_CONTIG	'7'		/* Contiguous file */
/* Further link types may be defined later. */

/*
 * Exit codes from the "tar" program
 */
#define	EX_SUCCESS	0		/* success! */
#define	EX_ARGSBAD	1		/* invalid args */
#define	EX_BADFILE	2		/* invalid filename */
#define	EX_BADARCH	3		/* bad archive */
#define	EX_SYSTEM	4		/* system gave unexpected error */


/*
 * Global variables
 */
TAR_EXTERN union record	*ar_block;	/* Start of block of archive */
TAR_EXTERN union record	*ar_record;	/* Current record of archive */
TAR_EXTERN union record	*ar_last;	/* Last+1 record of archive block */
TAR_EXTERN char		ar_reading;	/* 0 writing, !0 reading archive */
TAR_EXTERN int		blocking;	/* Size of each block, in records */
TAR_EXTERN int		blocksize;	/* Size of each block, in bytes */
TAR_EXTERN char		*ar_file;	/* File containing archive */
TAR_EXTERN char		*name_file;	/* File containing names to work on */
TAR_EXTERN char		*tar;		/* Name of this program */

/*
 * Flags from the command line
 */
TAR_EXTERN char	f_reblock;		/* -B */
TAR_EXTERN char	f_create;		/* -c */
TAR_EXTERN char	f_debug;		/* -d */
TAR_EXTERN char	f_sayblock;		/* -D */
TAR_EXTERN char	f_follow_links;		/* -h */
TAR_EXTERN char	f_ignorez;		/* -i */
TAR_EXTERN char	f_keep;			/* -k */
TAR_EXTERN char	f_modified;		/* -m */
TAR_EXTERN char	f_oldarch;		/* -o */
TAR_EXTERN char	f_use_protection;	/* -p */
TAR_EXTERN char	f_sorted_names;		/* -s */
TAR_EXTERN char	f_list;			/* -t */
TAR_EXTERN char	f_namefile;		/* -T */
TAR_EXTERN char	f_verbose;		/* -v */
TAR_EXTERN char	f_extract;		/* -x */
TAR_EXTERN char	f_compress;		/* -z */

/*
 * We now default to Unix Standard format rather than 4.2BSD tar format.
 * The code can actually produce all three:
 *	f_standard	ANSI standard
 *	f_oldarch	V7
 *	neither		4.2BSD
 * but we don't bother, since 4.2BSD can read ANSI standard format anyway.
 * The only advantage to the "neither" option is that we can cmp(1) our
 * output to the output of 4.2BSD tar, for debugging.
 */
#define		f_standard		(!f_oldarch)

/*
 * Structure for keeping track of filenames and lists thereof.
 */
struct name {
	struct name	*next;
	short		length;
	char		found;
	char		name[NAMSIZ+1];
};

TAR_EXTERN struct name	*namelist;	/* Points to first name in list */
TAR_EXTERN struct name	*namelast;	/* Points to last name in list */

TAR_EXTERN int		archive;	/* File descriptor for archive file */
TAR_EXTERN int		errors;		/* # of files in error */

/*
 *
 * Due to the next struct declaration, each routine that includes
 * "tar.h" must also include <sys/types.h>.  I tried to make it automatic,
 * but System V has no defines in <sys/types.h>, so there is no way of
 * knowing when it has been included.  In addition, it cannot be included
 * twice, but must be included exactly once.  Argghh!
 *
 * Thanks, typedef.  Thanks, USG.
 */
struct link {
	struct link	*next;
	dev_t		dev;
	ino_t		ino;
	short		linkcount;
	char		name[NAMSIZ+1];
};

TAR_EXTERN struct link	*linklist;	/* Points to first link in list */


/*
 * Error recovery stuff
 */
TAR_EXTERN char		read_error_flag;


/*
 * Declarations of functions available to the world.
 */
union record *findrec();
void userec();
union record *endofrecs();
void anno();
#define	 annorec(stream, msg)	anno(stream, msg, 0)	/* Cur rec */
#define	annofile(stream, msg)	anno(stream, msg, 1)	/* Saved rec */
@@@ Fin de tar.h
echo port.h 1>&2
cat >port.h <<'@@@ Fin de port.h'
/*
 * Portability declarations for public domain tar.
 *
 * @(#)port.h 1.1	86/03/11	Public Domain by John Gilmore, 1986
 */

/*
 * Everybody does wait() differently.  There seem to be no definitions
 * for this in V7 (e.g. you are supposed to shift and mask things out
 * using constant shifts and masks.)  So fuck 'em all -- my own non
 * standard but portable macros.  Don't change to a "union wait"
 * based approach -- the ordering of the elements of the struct 
 * depends on the byte-sex of the machine.  Foo!
 */
#define	TERM_SIGNAL(status)	((status) & 0x7F)
#define TERM_COREDUMP(status)	(((status) & 0x80) != 0)
#define TERM_VALUE(status)	((status) >> 8)


@@@ Fin de port.h
echo tar.c 1>&2
cat >tar.c <<'@@@ Fin de tar.c'
/*
 * A public domain tar(1) program.
 * 
 * Written by John Gilmore, ihnp4!hoptoad!gnu, starting 25 Aug 85.
 *
 * @(#)tar.c 1.21 10/29/86 Public Domain - gnu
 */

#include <stdio.h>
#include <sys/types.h>		/* Needed for typedefs in tar.h */

extern char 	*malloc();
extern char	*strncpy();
extern char	*optarg;	/* Pointer to argument */
extern int	optind;		/* Global argv index from getopt */

/*
 * The following causes "tar.h" to produce definitions of all the
 * global variables, rather than just "extern" declarations of them.
 */
#define TAR_EXTERN /**/
#include "tar.h"

/*
 * We should use a conversion routine that does reasonable error
 * checking -- atoi doesn't.  For now, punt.  FIXME.
 */
#define intconv	atoi
extern int	getoldopt();
extern void	read_and();
extern void	list_archive();
extern void	extract_archive();
extern void	create_archive();

static FILE	*namef;		/* File to read names from */
static char	**n_argv;	/* Argv used by name routines */
static int	n_argc;	/* Argc used by name routines */
				/* They also use "optind" from getopt(). */

void	describe();


/*
 * Main routine for tar.
 */
main(argc, argv)
	int	argc;
	char	**argv;
{

	/* Uncomment this message in particularly buggy versions...
	fprintf(stderr,
	 "tar: You are running an experimental PD tar, maybe use /bin/tar.\n");
	 */

	tar = "tar";		/* Set program name */

	options(argc, argv);

	name_init(argc, argv);

	if (f_create) {
		if (f_extract || f_list) goto dupflags;
		create_archive();
	} else if (f_extract) {
		if (f_list) goto dupflags;
		read_and(extract_archive);
	} else if (f_list) {
		read_and(list_archive);
	} else {
dupflags:
		fprintf (stderr,
"tar: you must specify exactly one of the c, t, or x options\n");
		describe();
		exit(EX_ARGSBAD);
	}
	exit(0);
}


/*
 * Parse the options for tar.
 */
int
options(argc, argv)
	int	argc;
	char	**argv;
{
	register int	c;		/* Option letter */

	/* Set default option values */
	blocking = DEFBLOCKING;		/* From Makefile */
	ar_file = DEF_AR_FILE;		/* From Makefile */

	/* Parse options */
	while ((c = getoldopt(argc, argv, "b:BcdDf:hikmopstT:vxzZ")
		) != EOF) {
		switch (c) {

		case 'b':
			blocking = intconv(optarg);
			break;

		case 'B':
			f_reblock++;		/* For reading 4.2BSD pipes */
			break;

		case 'c':
			f_create++;
			break;

		case 'd':
			f_debug++;		/* Debugging code */
			break;			/* Yes, even with dbx */

		case 'D':
			f_sayblock++;		/* Print block #s for debug */
			break;			/* of bad tar archives */

		case 'f':
			ar_file = optarg;
			break;

		case 'h':
			f_follow_links++;	/* follow symbolic links */
			break;

		case 'i':
			f_ignorez++;		/* Ignore zero records (eofs) */
			/*
			 * This can't be the default, because Unix tar
			 * writes two records of zeros, then pads out the
			 * block with garbage.
			 */
			break;

		case 'k':			/* Don't overwrite files */
			f_keep++;
			break;

		case 'm':
			f_modified++;
			break;

		case 'o':			/* Generate old archive */
			f_oldarch++;
			break;

		case 'p':
			f_use_protection++;
			(void)umask(0);		/* Turn off kernel "help" */
			break;

		case 's':
			f_sorted_names++;	/* Names to extr are sorted */
			break;

		case 't':
			f_list++;
			break;

		case 'T':
			name_file = optarg;
			f_namefile++;
			break;

		case 'v':
			f_verbose++;
			break;

		case 'x':
			f_extract++;
			break;

		case 'z':		/* Easy to type */
		case 'Z':		/* Like the filename extension .Z */
			f_compress++;
			break;

		case '?':
			describe();
			exit(EX_ARGSBAD);

		}
	}

	blocksize = blocking * RECORDSIZE;
}


/* FIXME, describe tar options here */
void
describe()
{

	fputs("tar: valid options:\n\
-b N	blocking factor N (block size = Nx512 bytes)\n\
-B	reblock as we read (for reading 4.2BSD pipes)\n\
-c	create an archive\n\
-D	dump record number within archive with each message\n\
-f F	read/write archive from file or device F\n\
-h	don't dump symbolic links; dump the files they point to\n\
-i	ignore blocks of zeros in the archive, which normally mean EOF\n\
-k	keep existing files, don't overwrite them from the archive\n\
-m	don't extract file modified time\n\
-o	write an old V7 format archive, rather than ANSI [draft 6] format\n\
-p	do extract all protection information\n\
-s	list of names to extract is sorted to match the archive\n\
-t	list a table of contents of an archive\n\
-T F	get names to extract or create from file F\n\
-v	verbosely list what files we process\n\
-x	extract files from an archive\n\
-z or Z	run the archive through compress(1)\n\
", stderr);
}


/*
 * Set up to gather file names for tar.
 *
 * They can either come from stdin or from argv.
 */
name_init(argc, argv)
	int	argc;
	char	**argv;
{

	if (f_namefile) {
		if (optind < argc) {
			fprintf(stderr, "tar: too many args with -T option\n");
			exit(EX_ARGSBAD);
		}
		if (!strcmp(name_file, "-")) {
			namef = stdin;
		} else {
			namef = fopen(name_file, "r");
			if (namef == NULL) {
				fprintf(stderr, "tar: ");
				perror(name_file);
				exit(EX_BADFILE);
			}
		}
	} else {
		/* Get file names from argv, after options. */
		n_argc = argc;
		n_argv = argv;
	}
}

/*
 * Get the next name from argv or the name file.
 *
 * Result is in static storage and can't be relied upon across two calls.
 */
char *
name_next()
{
	static char	buffer[NAMSIZ+2];	/* Holding pattern */
	register char	*p;
	register char	*q;

	if (namef == NULL) {
		/* Names come from argv, after options */
		if (optind < n_argc)
			return n_argv[optind++];
		return (char *)NULL;
	}
	p = fgets(buffer, NAMSIZ+1 /*nl*/, namef);
	if (p == NULL) return p;	/* End of file */
	q = p+strlen(p)-1;		/* Find the newline */
	*q-- = '\0';			/* Zap the newline */
	while (*q == '/')  *q-- = '\0';	/* Zap trailing slashes too */
	return p;
}


/*
 * Close the name file, if any.
 */
name_close()
{

	if (namef != NULL && namef != stdin) fclose(namef);
}


/*
 * Gather names in a list for scanning.
 * Could hash them later if we really care.
 *
 * If the names are already sorted to match the archive, we just
 * read them one by one.  name_gather reads the first one, and it
 * is called by name_match as appropriate to read the next ones.
 * At EOF, the last name read is just left in the buffer.
 * This option lets users of small machines extract an arbitrary
 * number of files by doing "tar t" and editing down the list of files.
 */
name_gather()
{
	register char *p;
	static struct name namebuf[1];	/* One-name buffer */

	if (f_sorted_names) {
		p = name_next();
		if (p) {
			namebuf->length = strlen(p);
			if (namebuf->length >= sizeof namebuf->name) {
				fprintf(stderr, "Argument name too long: %s\n",
					p);
				namebuf->length = (sizeof namebuf->name) - 1;
			}
			strncpy(namebuf->name, p, namebuf->length);
			namebuf->next = (struct name *)NULL;
			namebuf->found = 0;
			namelist = namebuf;
			namelast = namelist;
		}
		return;
	}

	/* Non sorted names -- read them all in */
	while (NULL != (p = name_next())) {
		addname(p);
	}
}

/*
 * A name from the namelist has been found.
 * If it's just a list, 

/*
 * Add a name to the namelist.
 */
addname(name)
	char	*name;			/* pointer to name */
{
	register int	i;		/* Length of string */
	register struct name	*p;	/* Current struct pointer */

	i = strlen(name);
	/*NOSTRICT*/
	p = (struct name *)
		malloc((unsigned)(i + sizeof(struct name) - NAMSIZ));
	p->next = (struct name *)NULL;
	p->length = i;
	p->found = 0;
	strncpy(p->name, name, i);
	p->name[i] = '\0';	/* Null term */
	if (namelast) namelast->next = p;
	namelast = p;
	if (!namelist) namelist = p;
}


/*
 * Match a name from an archive, p, with a name from the namelist.
 *
 * FIXME: Allow regular expressions in the name list.
 */
name_match(p)
	register char *p;
{
	register struct name	*nlp;
	register int		len;

again:
	if (0 == (nlp = namelist))	/* Empty namelist is easy */
		return 1;
	len = strlen(p);
	for (; nlp != 0; nlp = nlp->next) {
		if ( nlp->name[0] == p[0]	/* First chars match */
		 && nlp->length <= len		/* Archive len >= specified */
		 && (p[nlp->length] == '\0' || p[nlp->length] == '/')
						/* Full match on file/dirname */
		 && strncmp(p, nlp->name, nlp->length) == 0) /* Name compare */
		{
			nlp->found = 1;		/* Remember it matched */
			return 1;		/* We got a match */
		}
	}
	/*
	 * Filename from archive not found in namelist.
	 * If we have the whole namelist here, just return 0.
	 * Otherwise, read the next name in and compare it.
	 * If this was the last name, namelist->found will remain on.
	 * If not, we loop to compare the newly read name.
	 */
	if (f_sorted_names && namelist->found) {
		name_gather();		/* Read one more */
		if (!namelist->found) goto again;
	}
	return 0;
}


/*
 * Print the names of things in the namelist that were not matched.
 */
names_notfound()
{
	register struct name	*nlp;
	register char		*p;

	for (nlp = namelist; nlp != 0; nlp = nlp->next) {
		if (!nlp->found) {
			fprintf(stderr, "tar: %s not found in archive\n",
				nlp->name);
		}
		/*
		 * We could free() the list, but the process is about
		 * to die anyway, so save some CPU time.  Amigas and
		 * other similarly broken software will need to waste
		 * the time, though.
		 */
#ifndef unix
		if (!f_sorted_names)
			free(nlp);
#endif unix
	}
	namelist = (struct name *)NULL;
	namelast = (struct name *)NULL;

	if (f_sorted_names) {
		while (0 != (p = name_next()))
			fprintf(stderr, "tar: %s not found in archive\n", p);
	}
}
@@@ Fin de tar.c
echo create.c 1>&2
cat >create.c <<'@@@ Fin de create.c'
/*
 * Create a tar archive.
 *
 * Written 25 Aug 1985 by John Gilmore, ihnp4!hoptoad!gnu.
 *
 * @(#)create.c 1.19 9/9/86 Public Domain - gnu
 */
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
#include <pwd.h>
#include <grp.h>

#ifdef BSD42
#include <sys/dir.h>
#else
/*
 * FIXME: On other systems there is no standard place for the header file
 * for the portable directory access routines.  Change the #include line
 * below to bring it in from wherever it is.
 */
#include "ndir.h"
#endif

#ifdef USG
#include <sys/sysmacros.h>	/* major() and minor() defined here */
#endif

/*
 * V7 doesn't have a #define for this.
 */
#ifndef O_RDONLY
#define	O_RDONLY	0
#endif

#include "tar.h"

/*
 * If there are no symbolic links, there is no lstat().  Use stat().
 */
#ifndef S_IFLNK
#define lstat stat
#endif

extern char	*malloc();
extern char	*strcpy();
extern char	*strncpy();
extern int	errno;

union record *start_header();
void finish_header();
void finduname();
void findgname();
char *name_next();
void to_oct();


void
create_archive()
{
	register char	*p;

	open_archive(0);		/* Open for writing */

	while (p = name_next()) {
		dump_file(p);
	}

	write_eot();
	close_archive();
	name_close();
}		

/*
 * Dump a single file.  If it's a directory, recurse.
 * Result is 1 for success, 0 for failure.
 */
int
dump_file(p)
	char	*p;			/* File name to dump */
{
	struct stat	statbuf[1];
	union record	*header;
	char type;

	/*
	 * Use stat if following (rather than dumping) 4.2BSD's
	 * symbolic links.  Otherwise, use lstat (which, on non-4.2
	 * systems, is #define'd to stat anyway.
	 */
	if (0 != f_follow_links? stat(p, statbuf): lstat(p, statbuf))
	{
badperror:
		perror(p);
badfile:
		errors++;
		return 0;
	}

	switch (statbuf->st_mode & S_IFMT) {

	case S_IFREG:			/* Regular file */
	{
		int	f;		/* File descriptor */
		int	bufsize, count;
		register long	sizeleft;
		register union record 	*start;

		/*
		 * Handle a regular file with multiple links.
		 *
		 * We maintain a list of all such files that we've written so
		 * far.  Any time we see another, we check the list and
		 * avoid dumping the data again if we've done it once already.
		 */
		if (statbuf->st_nlink > 1) {
			register struct link	*lp;

			/* First quick and dirty.  Hashing, etc later FIXME */
			for (lp = linklist; lp; lp = lp->next) {
				if (lp->ino == statbuf->st_ino &&
				    lp->dev == statbuf->st_dev) {
					/* We found a link. */
					statbuf->st_size = 0;
					header = start_header(p, statbuf);
					if (header == NULL) goto badfile;
					strcpy(header->header.linkname,
						lp->name);
					header->header.linkflag = LF_LINK;
					finish_header(header);
					if (f_verbose)
						annorec(stdout, (char *)NULL);
						printf("%s link to %s\n",
							p, lp->name);
			/* Maybe remove from list after all links found? */
		/* If so, have to compare names in case he dumps twice. */
			/* Later: I don't understand the above.  If she
			 * dumps the file twice, it would be BAD to dump
			 * it the second time as a link...  gnu 25Jul86
			 */
					/* FIXME */
					goto donefile;
				}
			}

			/* Not found.  Add it to the list. */
			lp = (struct link *) malloc( (unsigned)
				(strlen(p) + sizeof(struct link) - NAMSIZ));
			lp->ino = statbuf->st_ino;
			lp->dev = statbuf->st_dev;
			strcpy(lp->name, p);
			lp->next = linklist;
			linklist = lp;
		}

		sizeleft = statbuf->st_size;
		/* Don't bother opening empty, world readable files. */
		if (sizeleft > 0 || 0444 != (0444 & statbuf->st_mode)) {
			f = open(p, O_RDONLY);
			if (f < 0) goto badperror;
		} else {
			f = -1;
		}
		header = start_header(p, statbuf);
		if (header == NULL) goto badfile;
		finish_header(header);
		while (sizeleft > 0) {
			start = findrec();
			bufsize = endofrecs()->charptr - start->charptr;
			if (sizeleft < bufsize)
				bufsize = sizeleft;
			count = read(f, start->charptr, bufsize);
			if (count < 0) {
				annorec(stderr, tar);
				fprintf(stderr,
				  "read error at byte %ld, reading %d bytes, in file ",
					statbuf->st_size - sizeleft,
					bufsize);
				perror(p);	/* FIXME */
				goto padit;
			}
			sizeleft -= count;
			userec(start+(count-1)/RECORDSIZE);
			if (count == bufsize) continue;
			annorec(stderr, tar);
			fprintf(stderr,
	"%s: file shrunk by %d bytes, padding with zeros.\n",
				p, sizeleft);
			goto padit;		/* Short read */
		}
		if (f >= 0)
			(void)close(f);

		/* Clear last block garbage to zeros, FIXME */

		if (f_verbose) {
			annorec(stdout, (char *)NULL);
			printf("%s\n", p);
		}
	donefile:
		break;

		/*
		 * File shrunk or gave error, pad out tape to match
		 * the size we specified in the header.
		 */
	padit:
		abort();
	}

#ifdef S_IFLNK
	case S_IFLNK:			/* Symbolic link */
	{
		int size;

		statbuf->st_size = 0;		/* Force 0 size on symlink */
		header = start_header(p, statbuf);
		if (header == NULL) goto badfile;
		size = readlink(p, header->header.linkname, NAMSIZ);
		if (size < 0) goto badperror;
		if (size == NAMSIZ) {
			annorec(stderr, tar);
			fprintf(stderr,
				"%s: symbolic link too long\n", p);
			break;
		}
		header->header.linkname[size] = '\0';
		header->header.linkflag = LF_SYMLINK;
		finish_header(header);		/* Nothing more to do to it */
		if (f_verbose) {
			annorec(stdout, (char *)NULL);
			printf("%s\n", p);
		}
	}
		break;
#endif

	case S_IFDIR:			/* Directory */
	{
		register DIR *dirp;
		register struct direct *d;
		char namebuf[NAMSIZ+2];
		register int len;

		/* Build new prototype name */
		strncpy(namebuf, p, sizeof (namebuf));
		len = strlen(namebuf);
		while (len >= 1 && '/' == namebuf[len-1]) 
			len--;			/* Delete trailing slashes */
		namebuf[len++] = '/';		/* Now add exactly one back */

		/*
		 * Output directory header record with permissions
		 * FIXME, do this AFTER files, to avoid R/O dir problems?
		 * If Unix Std format, don't put / on end of dir name
		 * If old archive format, don't write record at all.
		 */
		if (!f_oldarch) {
			statbuf->st_size = 0;	/* Force 0 size on dir */
			/*
			 * If people could really read standard archives,
			 * this should be:		(FIXME)
			header = start_header(f_standard? p: namebuf, statbuf);
			 * but since they'd interpret LF_DIR records as
			 * regular files, we'd better put the / on the name.
			 */
			header = start_header(namebuf, statbuf);
			if (header == NULL)
				goto badfile;	/* eg name too long */
			if (f_standard) {
				header->header.linkflag = LF_DIR;
			}
			finish_header(header);	/* Done with directory header */
		}
		if (f_verbose) {
			annorec(stdout, (char *)NULL);
			printf("%s\n", p);
		}

		/* Hack to remove "./" from the front of all the file names */
		if (len == 2 && namebuf[0] == '.') {
			len = 0;
		}

		/* Now output all the files in the directory */
		errno = 0;
		dirp = opendir(p);
		if (!dirp) {
			if (errno) {
				perror (p);
			} else {
				annorec(stderr, tar);
				fprintf(stderr, "%s: error opening directory",
					p);
			}
			break;
		}
		
		/* Should speed this up by cd-ing into the dir, FIXME */
		while (NULL != (d=readdir(dirp))) {
			/* Skip . and .. */
			if (d->d_name[0] == '.') {
				if (d->d_name[1] == '\0') continue;
				if (d->d_name[1] == '.') {
					if (d->d_name[2] == '\0') continue;
				}
			}
			if (d->d_namlen + len >= NAMSIZ) {
				annorec(stderr, tar);
				fprintf(stderr, "%s%s: name too long\n", 
					namebuf, d->d_name);
				continue;
			}
			strcpy(namebuf+len, d->d_name);
			dump_file(namebuf);
		}

		closedir(dirp);
	}
		break;

	case S_IFCHR:			/* Character special file */
		type = LF_CHR;
		goto easy;

	case S_IFBLK:			/* Block     special file */
		type = LF_BLK;
		goto easy;

#ifdef S_IFIFO
	case S_IFIFO:			/* Fifo      special file */
		type = LF_FIFO;
#endif S_IFIFO

	easy:
		if (!f_standard) goto unknown;

		statbuf->st_size = 0;		/* Force 0 size */
		header = start_header(p, statbuf);
		if (header == NULL) goto badfile;	/* eg name too long */

		header->header.linkflag = type;
		if (type != LF_FIFO) {
			to_oct((long) major(statbuf->st_rdev), 8,
				header->header.devmajor);
			to_oct((long) minor(statbuf->st_rdev), 8,
				header->header.devminor);
		}

		finish_header(header);
		if (f_verbose) {
			annorec(stdout, (char *)NULL);
			printf("%s\n", p);
		}
		break;

	default:
	unknown:
		annorec(stderr, tar);
		fprintf(stderr,
			"%s: Unknown file type; file ignored.\n", p);
		break;
	}

	return 1;			/* Success */
}


/*
 * Make a header block for the file  name  whose stat info is  st .
 * Return header pointer for success, NULL if the name is too long.
 */
union record *
start_header(name, st)
	char	*name;
	register struct stat *st;
{
	register union record *header;

	header = (union record *) findrec();
	bzero(header->charptr, sizeof(*header)); /* XXX speed up */
	strcpy(header->header.name, name);
	if (header->header.name[NAMSIZ-1]) {
		annorec(stderr, tar);
		fprintf(stderr, "%s: name too long\n", name);
		return NULL;
	}
	to_oct((long) (st->st_mode & ~S_IFMT),
					8,  header->header.mode);
	to_oct((long) st->st_uid,	8,  header->header.uid);
	to_oct((long) st->st_gid,	8,  header->header.gid);
	to_oct((long) st->st_size,	1+12, header->header.size);
	to_oct((long) st->st_mtime,	1+12, header->header.mtime);
	/* header->header.linkflag is left as null */

#ifndef NONAMES
	/* Fill in new Unix Standard fields if desired. */
	if (f_standard) {
		header->header.linkflag = LF_NORMAL;	/* New default */
		strcpy(header->header.magic, TMAGIC);	/* Mark as Unix Std */
		finduname(header->header.uname, st->st_uid);
		findgname(header->header.gname, st->st_gid);
	}
#endif
	return header;
}

/* 
 * Finish off a filled-in header block and write it out.
 */
void
finish_header(header)
	register union record *header;
{
	register int	i, sum;
	register char	*p;

	bcopy(CHKBLANKS, header->header.chksum, sizeof(header->header.chksum));

	sum = 0;
	p = header->charptr;
	for (i = sizeof(*header); --i >= 0; ) {
		/*
		 * We can't use unsigned char here because of old compilers,
		 * e.g. V7.
		 */
		sum += 0xFF & *p++;
	}

	/*
	 * Fill in the checksum field.  It's formatted differently
	 * from the other fields:  it has [6] digits, a null, then a
	 * space -- rather than digits, a space, then a null.
	 * We use to_oct then write the null in over to_oct's space.
	 * The final space is already there, from checksumming, and
	 * to_oct doesn't modify it.
	 *
	 * This is a fast way to do:
	 * (void) sprintf(header->header.chksum, "%6o", sum);
	 */
	to_oct((long) sum,	8,  header->header.chksum);
	header->header.chksum[6] = '\0';	/* Zap the space */

	userec(header);
	return;
}


/*
 * Quick and dirty octal conversion.
 * Converts long "value" into a "digs"-digit field at "where",
 * including a trailing space and room for a null.  "digs"==3 means
 * 1 digit, a space, and room for a null.
 *
 * We assume the trailing null is already there and don't fill it in.
 * This fact is used by start_header and finish_header, so don't change it!
 *
 * This should be equivalent to:
 *	(void) sprintf(where, "%*lo ", digs-2, value);
 * except that sprintf fills in the trailing null and we don't.
 */
void
to_oct(value, digs, where)
	register long	value;
	register int	digs;
	register char	*where;
{
	
	--digs;				/* Trailing null slot is left alone */
	where[--digs] = ' ';		/* Put in the space, though */

	/* Produce the digits -- at least one */
	do {
		where[--digs] = '0' + (value & 7);	/* one octal digit */
		value >>= 3;
	} while (digs > 0 && value != 0);

	/* Leading spaces, if necessary */
	while (digs > 0)
		where[--digs] = ' ';

}


/*
 * Write the EOT block(s).
 */
write_eot()
{
	union record *p;

	p = findrec();
	bzero(p->charptr, RECORDSIZE);
	userec(p);
	/* FIXME, only one EOT block should be needed. */
	p = findrec();
	bzero(p->charptr, RECORDSIZE);
	userec(p);
}
@@@ Fin de create.c
echo extract.c 1>&2
cat >extract.c <<'@@@ Fin de extract.c'
/*
 * Extract files from a tar archive.
 *
 * Written 19 Nov 1985 by John Gilmore, ihnp4!hoptoad!gnu.
 *
 * @(#) extract.c 1.17 86/10/29 Public Domain - gnu
 */

#include <stdio.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>

#ifdef BSD42
#include <sys/file.h>
#endif

#ifdef USG
#include <fcntl.h>
#endif

extern int errno;			/* From libc.a */
extern char *index();			/* From libc.a or port.c */

#include "tar.h"

extern union record *head;		/* Points to current tape header */
extern struct stat hstat[1];		/* Stat struct corresponding */

extern void print_header();
extern void skip_file();
extern void pr_mkdir();

int make_dirs();			/* Makes required directories */

time_t now = 0;				/* Current time */

/*
 * Extract a file from the archive.
 */
void
extract_archive()
{
	register char *data;
	int fd, check, namelen, written;
	long size;
	time_t acc_upd_times[2];
	int	standard;		/* Is header standard? */

	saverec(&head);			/* Make sure it sticks around */
	userec(head);			/* And go past it in the archive */
	decode_header(head, hstat, &standard, 1);	/* Snarf fields */

	/* Print the record from 'head' and 'hstat' */
	if (f_verbose)
		print_header();

	switch (head->header.linkflag) {

	default:
		annofile(stderr, tar);
		fprintf(stderr, "Unknown file type %d for %s\n",
			head->header.linkflag, head->header.name);
		/* FALL THRU */

	case LF_OLDNORMAL:
	case LF_NORMAL:
		/*
		 * Appears to be a file.
		 * See if it's really a directory.
		 */
		namelen = strlen(head->header.name)-1;
		if (head->header.name[namelen] == '/')
			goto really_dir;

		/* FIXME, deal with protection issues */
		/* FIXME, f_keep doesn't work on V7, st_mode loses too */
	again_file:
		fd = open(head->header.name,
			f_keep?
			O_NDELAY|O_WRONLY|O_APPEND|O_CREAT|O_EXCL:
			O_NDELAY|O_WRONLY|O_APPEND|O_CREAT|O_TRUNC,
			hstat->st_mode);
		if (fd < 0) {
			if (make_dirs(head->header.name))
				goto again_file;
			annofile(stderr, tar);
			fprintf(stderr, "Could not make file ");
			perror(head->header.name);
			skip_file((long)hstat->st_size);
			goto quit;
		}

		for (size = hstat->st_size;
		     size > 0;
		     size -= written) {
			/*
			 * Locate data, determine max length
			 * writeable, write it, record that
			 * we have used the data, then check
			 * if the write worked.
			 */
			data = findrec()->charptr;
			written = endofrecs()->charptr - data;
			if (written > size) written = size;
			errno = 0;
			check = write (fd, data, written);
			/*
			 * The following is in violation of strict
			 * typing, since the arg to userec
			 * should be a struct rec *.  FIXME.
			 */
			userec(data + written - 1);
			if (check == written) continue;
			/*
			 * Error in writing to file.
			 * Print it, skip to next file in archive.
			 */
			annofile(stderr, tar);
			fprintf(stderr,
	"Tried to write %d bytes to file, could only write %d:\n",
				written, check);
			perror(head->header.name);
			(void) close(fd);
			skip_file((long)(size - written));
			goto quit;
		}

		check = close(fd);
		if (check < 0) {
			annofile(stderr, tar);
			fprintf(stderr, "Error while closing ");
			perror(head->header.name);
		}
		
		/* FIXME, deal with uid/gid/mtimes/suid */

		/*
		 * Set the modified time of the file.
		 * 
		 * Note that we set the accessed time to "now", which
		 * is really "the time we started extracting files".
		 */
		if (!f_modified) {
			if (!now)
				now = time((time_t *)0); /* Just do it once */
			acc_upd_times[0] = now;	         /* Accessed now */
			acc_upd_times[1] = hstat->st_mtime; /* Mod'd */
			if (utime(head->header.name, acc_upd_times) < 0) {
				annofile(stderr, tar);
				perror(head->header.name);
			}
		}

		/*
		 * If '-p' is not set, OR if the file has pretty normal
		 * mode bits, we can skip the chmod and save a sys call.
		 * This works because we did umask(0) if -p is set, so
		 * the open() that created the file will have set the modes
		 * properly.  
		 * FIXME: I don't know what open() does w/UID/GID/SVTX bits.
		 * However, if we've done a chown(), they got reset.
		 */
		if (f_use_protection
		    && (hstat->st_mode & (S_ISUID|S_ISGID|S_ISVTX))) {
			if (chmod(head->header.name, (int)hstat->st_mode) < 0) {
				annofile(stderr, tar);
				perror(head->header.name);
			}
		}

	quit:
		break;

	case LF_LINK:
	again_link:
		check = link (head->header.linkname,
			      head->header.name);
		/* FIXME, don't worry uid, gid, etc... */
		if (check == 0)
			break;
		if (make_dirs(head->header.linkname))
			goto again_link;
		annofile(stderr, tar);
		fprintf(stderr, "Could not link %s to ",
			head->header.name);
		perror(head->header.linkname);
		break;

#ifdef S_IFLNK
	case LF_SYMLINK:
	again_symlink:
		check = symlink(head->header.linkname,
			        head->header.name);
		/* FIXME, don't worry uid, gid, etc... */
		if (check == 0)
			break;
		if (make_dirs(head->header.linkname))
			goto again_symlink;
		annofile(stderr, tar);
		fprintf(stderr, "Could not create symlink ");
		perror(head->header.linkname);
		break;
#endif

	case LF_CHR:
		hstat->st_mode |= S_IFCHR;
		goto make_node;

	case LF_BLK:
		hstat->st_mode |= S_IFBLK;
	make_node:
		check = mknod(head->header.name, (int) hstat->st_mode,
			(int) hstat->st_dev);
		if (check != 0) {
			if (make_dirs(head->header.name))
				goto make_node;
			annofile(stderr, tar);
			fprintf(stderr, "Could not make special file ");
			perror(head->header.name);
			break;
		};
		break;

	case LF_DIR:
		/* Check for trailing / */
		namelen = strlen(head->header.name)-1;
	really_dir:
		while (namelen && head->header.name[namelen] == '/')
			head->header.name[namelen--] = '\0';	/* Zap / */
		
		/* FIXME, deal with umask */
	again_dir:
		check = mkdir(head->header.name, (int)hstat->st_mode);
		if (check != 0) {
			if (make_dirs(head->header.name))
				goto again_dir;
			annofile(stderr, tar);
			fprintf(stderr, "Could not make directory ");
			perror(head->header.name);
			break;
		}
		
		/* FIXME, deal with uid/gid */
		/* FIXME, Remember timestamps for after files created? */
		break;

	case LF_FIFO:
		abort();	/* FIXME */
		break;

	}

	/* We don't need to save it any longer. */
	saverec((union record **) 0);	/* Unsave it */
}

/*
 * After a file/link/symlink/dir creation has failed, see if
 * it's because some required directory was not present, and if
 * so, create all required dirs.
 */
int
make_dirs(pathname)
	char *pathname;
{
	char *p;			/* Points into path */
	int madeone = 0;		/* Did we do anything yet? */
	int save_errno = errno;		/* Remember caller's errno */
	int check;

	if (errno != ENOENT)
		return 0;		/* Not our problem */

	for (p = index(pathname, '/'); p != NULL; p = index(p+1, '/')) {
		/* Avoid mkdir of empty string, if leading or double '/' */
		if (p == pathname || p[-1] == '/')
			continue;
		/* Avoid mkdir where last part of path is '.' */
		if (p[-1] == '.' && (p == pathname+1 || p[-2] == '/'))
			continue;
		*p = 0;				/* Truncate the path there */
		check = mkdir (pathname, 0777);	/* Try to create it as a dir */
		*p = '/';
		if (check == 0) {
			/* FIXME chown, chgrp it same as file being created */
			/* FIXME, show mode as modified by current umask */
			pr_mkdir(pathname, p-pathname, 0777);
			madeone++;		/* Remember if we made one */
			continue;
		}
		if (errno == EEXIST)		/* Directory already exists */
			continue;
		/*
		 * Some other error in the mkdir.  We return to the caller.
		 */
		break;
	}

	errno = save_errno;		/* Restore caller's errno */
	return madeone;			/* Tell them to retry if we made one */
}
@@@ Fin de extract.c
echo buffer.c 1>&2
cat >buffer.c <<'@@@ Fin de buffer.c'
/*
 * Buffer management for public domain tar.
 *
 * Written by John Gilmore, ihnp4!hoptoad!gnu, on 25 August 1985.
 *
 * @(#) buffer.c 1.14 10/28/86 Public Domain - gnu
 */

#include <stdio.h>
#include <errno.h>
#include <sys/types.h>		/* For non-Berkeley systems */
#include <sys/file.h>
#include <signal.h>

#include "tar.h"
#include "port.h"

#define	STDIN	0		/* Standard input  file descriptor */
#define	STDOUT	1		/* Standard output file descriptor */

#define	PREAD	0		/* Read  file descriptor from pipe() */
#define	PWRITE	1		/* Write file descriptor from pipe() */

extern char	*valloc();

/*
 * V7 doesn't have a #define for this.
 */
#ifndef O_RDONLY
#define	O_RDONLY	0
#endif

#define	MAGIC_STAT	105	/* Magic status returned by child, if
				   it can't exec compress.  We hope compress
				   never returns this status! */
/*
 * The record pointed to by save_rec should not be overlaid
 * when reading in a new tape block.  Copy it to record_save_area first, and
 * change the pointer in *save_rec to point to record_save_area.
 * Saved_recno records the record number at the time of the save.
 * This is used by annofile() to print the record number of a file's
 * header record.
 */
static union record **save_rec;
static union record record_save_area;
static int	    saved_recno;

/*
 * PID of child compress program, if f_compress.
 */
static int	compress_pid;

/*
 * Record number of the start of this block of records
 */
static int	baserec;

/*
 * Error recovery stuff
 */
static int	r_error_count;


/*
 * Return the location of the next available input or output record.
 */
union record *
findrec()
{
	if (ar_record == ar_last) {
		flush_archive();
		if (ar_record == ar_last)
			return (union record *)NULL;	/* EOF */
	}
	return ar_record;
}


/*
 * Indicate that we have used all records up thru the argument.
 * (should the arg have an off-by-1? XXX FIXME)
 */
void
userec(rec)
	union record *rec;
{
	while(rec >= ar_record)
		ar_record++;
	/*
	 * Do NOT flush the archive here.  If we do, the same
	 * argument to userec() could mean the next record (if the
	 * input block is exactly one record long), which is not what
	 * is intended.
	 */
	if (ar_record > ar_last)
		abort();
}


/*
 * Return a pointer to the end of the current records buffer.
 * All the space between findrec() and endofrecs() is available
 * for filling with data, or taking data from.
 */
union record *
endofrecs()
{
	return ar_last;
}


/*
 * Open an archive file.  The argument specifies whether we are
 * reading or writing.
 */
open_archive(read)
	int read;
{

	if (ar_file[0] == '-' && ar_file[1] == '\0') {
		if (read)	archive = STDIN;
		else		archive = STDOUT;
	} else if (read) {
		archive = open(ar_file, O_RDONLY);
	} else {
		archive = creat(ar_file, 0666);
	}

	if (archive < 0) {
		perror(ar_file);
		exit(EX_BADARCH);
	}

	/*NOSTRICT*/
	ar_block = (union record *) valloc((unsigned)blocksize);
	if (!ar_block) {
		fprintf(stderr,
		"tar: could not allocate memory for blocking factor %d\n",
			blocking);
		exit(EX_ARGSBAD);
	}

	ar_record = ar_block;
	ar_last   = ar_block + blocking;

	/*
	 * Handle compressed archives.
	 *
	 * FIXME, currently supported for reading only.
	 * FIXME, writing involves forking again for a small process
	 * that will reblock the output of compress to the user's specs.
	 */
	if (f_compress) {
		int pipes[2];
		int err;

		if (!read) {
			fprintf(stderr,
				"tar: cannot write compressed archives yet.\n");
			exit(EX_ARGSBAD);
		}

		/* Create a pipe to get compress's output to us */
		err = pipe(pipes);
		if (err < 0) {
			perror ("tar: cannot create pipe to compress");
			exit(EX_SYSTEM);
		}
		
		/* Fork compress process */
		compress_pid = fork();
		if (compress_pid < 0) {
			perror("tar: cannot fork compress");
			exit(EX_SYSTEM);
		}

		/*
		 * Child process.
		 * 
 		 * Move input to stdin, write side of pipe to stdout,
		 * then exec compress.
		 */
		if (compress_pid == 0) {
			(void) close (pipes[PREAD]);	/* We won't use it */
			if (archive != STDIN) {
				(void) close(STDIN);
				err = dup(archive);
				if (err != 0) {
					perror(
					 "tar: cannot dup input to stdin");
					exit(EX_SYSTEM);
				}
				(void) close(archive);
			}
			if (pipes[PWRITE] != STDOUT) {
				(void) close (STDOUT);
				err = dup (pipes[PWRITE]);
				if (err != STDOUT) {
					perror(
					  "tar: cannot dup pipe output");
					exit(MAGIC_STAT);
				}
				(void) close (pipes[PWRITE]);
			}
			execlp("compress", "compress", "-d", (char *)0);
			perror("tar: cannot exec compress");
			exit(MAGIC_STAT);
		}

		/*
		 * Parent process.  Clean up.
		 * FIXME, note that this may leave standard input closed,
		 * if the compressed archive was on standard input.
		 */
		(void) close (archive);		/* Close compressed archive */
		(void) close (pipes[PWRITE]);	/* Close write side of pipe */
		archive = pipes[PREAD];		/* Read side is our archive */

#ifdef BSD42
		f_reblock++;		/* Pipe will give random # of bytes */
#endif BSD42
	}

	ar_reading = read;
	if (read) {
		ar_last = ar_block;		/* Set up for 1st block = # 0 */
		flush_archive();
	}
}


/*
 * Remember a union record * as pointing to something that we
 * need to keep when reading onward in the file.  Only one such
 * thing can be remembered at once, and it only works when reading
 * an archive.
 */
saverec(pointer)
	union record **pointer;
{

	save_rec = pointer;
	saved_recno = baserec + ar_record - ar_block;
}

/*
 * Perform a write to flush the buffer.
 */
fl_write()
{
	int err;

	err = write(archive, ar_block->charptr, blocksize);
	if (err == blocksize) return;
	/* FIXME, multi volume support on write goes here */
	if (err < 0)
		perror(ar_file);
	else
		fprintf(stderr, "tar: %s: write failed, short %d bytes\n",
			ar_file, blocksize - err);
	exit(EX_BADARCH);
}


/*
 * Handle read errors on the archive.
 *
 * If the read should be retried, readerror() returns to the caller.
 */
void
readerror()
{
#	define	READ_ERROR_MAX	10

	read_error_flag++;		/* Tell callers */

	annorec(stderr, tar);
	fprintf(stderr, "Read error on ");
	perror(ar_file);

	if (baserec == 0) {
		/* First block of tape.  Probably stupidity error */
		exit(EX_BADARCH);
	}	

	/*
	 * Read error in mid archive.  We retry up to READ_ERROR_MAX times
	 * and then give up on reading the archive.  We set read_error_flag
	 * for our callers, so they can cope if they want.
	 */
	if (r_error_count++ > READ_ERROR_MAX) {
		annorec(stderr, tar);
		fprintf(stderr, "Too many errors, quitting.\n");
		exit(EX_BADARCH);
	}
	return;
}


/*
 * Perform a read to flush the buffer.
 */
fl_read()
{
	int err;		/* Result from system call */
	int left;		/* Bytes left */
	char *more;		/* Pointer to next byte to read */

	/*
	 * Clear the count of errors.  This only applies to a single
	 * call to fl_read.  We leave read_error_flag alone; it is
	 * only turned off by higher level software.
	 */
	r_error_count = 0;	/* Clear error count */

	/*
	 * If we are about to wipe out a record that
	 * somebody needs to keep, copy it out to a holding
	 * area and adjust somebody's pointer to it.
	 */
	if (save_rec &&
	    *save_rec >= ar_record &&
	    *save_rec < ar_last) {
		record_save_area = **save_rec;
		*save_rec = &record_save_area;
	}
error_loop:
	err = read(archive, ar_block->charptr, blocksize);
	if (err == blocksize) return;
	if (err < 0) {
		readerror();
		goto error_loop;	/* Try again */
	}

	more = ar_block->charptr + err;
	left = blocksize - err;

again:
	if (0 == (((unsigned)left) % RECORDSIZE)) {
		/* FIXME, for size=0, multi vol support */
		/* On the first block, warn about the problem */
		if (!f_reblock && baserec == 0 && f_verbose) {
			annorec(stderr, tar);
			fprintf(stderr, "Blocksize = %d records\n",
				err / RECORDSIZE);
		}
		ar_last = ar_block + ((unsigned)(blocksize - left))/RECORDSIZE;
		return;
	}
	if (f_reblock) {
		/*
		 * User warned us about this.  Fix up.
		 */
		if (left > 0) {
error_loop_2:
			err = read(archive, more, left);
			if (err < 0) {
				readerror();
				goto error_loop_2;	/* Try again */
			}
			if (err == 0) {
				annorec(stderr, tar);
				fprintf(stderr,
		"%s: eof not on block boundary, strange...\n",
					ar_file);
				exit(EX_BADARCH);
			}
			left -= err;
			more += err;
			goto again;
		}
	} else {
		annorec(stderr, tar);
		fprintf(stderr, "%s: read %d bytes, strange...\n",
			ar_file, err);
		exit(EX_BADARCH);
	}
}


/*
 * Flush the current buffer to/from the archive.
 */
flush_archive()
{
	baserec += ar_last - ar_block;/* Keep track of block #s */
	ar_record = ar_block;		/* Restore pointer to start */
	ar_last = ar_block + blocking;	/* Restore pointer to end */

	if (!ar_reading) 
		fl_write();
	else
		fl_read();
}

/*
 * Close the archive file.
 */
close_archive()
{
	int child;
	int status;

	if (!ar_reading) flush_archive();
	(void) close(archive);

	if (f_compress) {
		/*
		 * Loop waiting for the right child to die, or for
		 * no more kids.
		 */
		while (((child = wait(&status)) != compress_pid) && child != -1)
			;

		if (child != -1) {
			switch (TERM_SIGNAL(status)) {
			case 0:		/* Terminated by itself */
				if (TERM_VALUE(status) == MAGIC_STAT) {
					exit(EX_SYSTEM);/* Child had trouble */
				}
				if (TERM_VALUE(status))
					fprintf(stderr,
				  "tar: compress child returned status %d\n",
						TERM_VALUE(status));
			case SIGPIPE:
				break;		/* This is OK. */

			default:
				fprintf(stderr,
				 "tar: compress child died with signal %d%s\n",
				 TERM_SIGNAL(status),
				 TERM_COREDUMP(status)? " (core dumped)": "");
			}
		}
	}
}


/*
 * Message management.
 *
 * anno writes a message prefix on stream (eg stdout, stderr).
 *
 * The specified prefix is normally output followed by a colon and a space.
 * However, if other command line options are set, more output can come
 * out, such as the record # within the archive.
 *
 * If the specified prefix is NULL, no output is produced unless the
 * command line option(s) are set.
 *
 * If the third argument is 1, the "saved" record # is used; if 0, the
 * "current" record # is used.
 */
void
anno(stream, prefix, savedp)
	FILE	*stream;
	char	*prefix;
	int	savedp;
{
#	define	MAXANNO	50
	char	buffer[MAXANNO];	/* Holds annorecment */
#	define	ANNOWIDTH 13
	int	space;

	if (f_sayblock) {
		if (prefix) {
			fputs(prefix, stream);
			putc(' ', stream);
		}
		sprintf(buffer, "rec %d: ",
			savedp?	saved_recno:
				baserec + ar_record - ar_block);
		fputs(buffer, stream);
		space = ANNOWIDTH - strlen(buffer);
		if (space > 0) {
			fprintf(stream, "%*s", space, "");
		}
	} else if (prefix) {
		fputs(prefix, stream);
		fputs(": ", stream);
	}
}
@@@ Fin de buffer.c
echo getoldopt.c 1>&2
cat >getoldopt.c <<'@@@ Fin de getoldopt.c'
/*
 * Plug-compatible replacement for getopt() for parsing tar-like
 * arguments.  If the first argument begins with "-", it uses getopt;
 * otherwise, it uses the old rules used by tar, dump, and ps.
 *
 * Written 25 August 1985 by John Gilmore (ihnp4!hoptoad!gnu) and placed
 * in the Pubic Domain for your edification and enjoyment.
 *
 * @(#)getoldopt.c 1.4 2/4/86 Public Domain - gnu
 */

#include <stdio.h>


int
getoldopt(argc, argv, optstring)
	int	argc;
	char	**argv;
	char	*optstring;
{
	extern char	*optarg;	/* Points to next arg */
	extern int	optind;		/* Global argv index */
	static char	*key;		/* Points to next keyletter */
	static char	use_getopt;	/* !=0 if argv[1][0] was '-' */
	extern char	*index();
	char		c;
	char		*place;

	optarg = NULL;
	
	if (key == NULL) {		/* First time */
		if (argc < 2) return EOF;
		key = argv[1];
		if (*key == '-')
			use_getopt++;
		else
			optind = 2;
	}

	if (use_getopt)
		return getopt(argc, argv, optstring);

	c = *key++;
	if (c == '\0') {
		key--;
		return EOF;
	}
	place = index(optstring, c);

	if (place == NULL || c == ':') {
		fprintf(stderr, "%s: unknown option %c\n", argv[0], c);
		return('?');
	}

	place++;
	if (*place == ':') {
		if (optind < argc) {
			optarg = argv[optind];
			optind++;
		} else {
			fprintf(stderr, "%s: %c argument missing\n",
				argv[0], c);
			return('?');
		}
	}

	return(c);
}
@@@ Fin de getoldopt.c
echo list.c 1>&2
cat >list.c <<'@@@ Fin de list.c'
/*
 * List a tar archive.
 *
 * Also includes support routines for reading a tar archive.
 *
 * Pubic Domain version written 26 Aug 1985 by John Gilmore (ihnp4!hoptoad!gnu).
 *
 * @(#)list.c 1.18 9/23/86 Public Domain - gnu
 */
#include <stdio.h>
#include <ctype.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/file.h>

char *ctime();				/* From libc.a */

#define	isodigit(c)	( ((c) >= '0') && ((c) <= '7') )

#include "tar.h"

long from_oct();			/* Decode octal number */
void demode();				/* Print file mode */

union record *head;			/* Points to current archive header */
struct stat hstat[1];			/* Stat struct corresponding */

void print_header();
void skip_file();


/*
 * Main loop for reading an archive.
 */
void
read_and(do_something)
	void (*do_something)();
{
	int status = 1;
	int prev_status;

	name_gather();			/* Gather all the names */
	open_archive(1);		/* Open for reading */

	for(;;) {
		prev_status = status;
		status = read_header();
		switch (status) {

		case 1:			/* Valid header */
			/* We should decode next field (mode) first... */
			/* Ensure incoming names are null terminated. */
			head->header.name[NAMSIZ-1] = '\0';
			
			if (!name_match(head->header.name)) {
				/* Skip past it in the archive */
				userec(head);
				/* Skip to the next header on the archive */
				skip_file((long)hstat->st_size);
				continue;
			}

			(*do_something)();
			continue;

			/*
			 * If the previous header was good, tell them
			 * that we are skipping bad ones.
			 */
		case 0:			/* Invalid header */
		case0:
			userec(head);
			if (prev_status == 1) {
				annorec(stderr, tar);
				fprintf(stderr,
					"Skipping to next file header...\n");
			}
			continue;

		case 2:			/* Block of zeroes */
			if (f_ignorez)	
				goto case0;	/* Just skip if asked */
			/* FALL THRU */
		case EOF:		/* End of archive */
			break;
		}
		break;
	};

	close_archive();
	names_notfound();		/* Print names not found */
}		


/*
 * Print a header record, based on tar options.
 */
void
list_archive()
{

	/* Save the record */
	saverec(&head);

	/* Print the header record */
	print_header();

	/* Skip past it in the archive */
	saverec((union record **) 0);	/* Unsave it */
	userec(head);

	/* Skip to the next header on the archive */
	skip_file((long)hstat->st_size);
}


/*
 * Read a record that's supposed to be a header record.
 * Return its address in "head", and if it is good, the file's
 * size in hstat->st_size.
 *
 * Return 1 for success, 0 if the checksum is bad, EOF on eof,
 * 2 for a block full of zeros (EOF marker).
 *
 * You must always userec(head) to skip past the header which this
 * routine reads.
 */
int
read_header()
{
	register int	i;
	register long	sum, recsum;
	register char	*p;
	register union record *header;

	header = findrec();
	head = header;		/* This is our current header */
	if (NULL == header) return EOF;

	recsum = from_oct(8,  header->header.chksum);

	sum = 0;
	p = header->charptr;
	for (i = sizeof(*header); --i >= 0;) {
		/*
		 * We can't use unsigned char here because of old compilers,
		 * e.g. V7.
		 */
		sum += 0xFF & *p++;
	}

	/* Adjust checksum to count the "chksum" field as blanks. */
	for (i = sizeof(header->header.chksum); --i >= 0;)
		sum -= 0xFF & header->header.chksum[i];
	sum += ' '* sizeof header->header.chksum;	

	if (sum == recsum) {
		/*
		 * Good record.  Decode file size and return.
		 */
		if (header->header.linkflag == LF_LINK)
			hstat->st_size = 0;	/* Links 0 size on tape */
		else
			hstat->st_size = from_oct(1+12, header->header.size);
		return 1;
	}

	if (sum == 8*' ') {
		/*
		 * This is a zeroed block...whole block is 0's except
		 * for the 8 blanks we faked for the checksum field.
		 */
		return 2;
	}

	return 0;
}


/* 
 * Decode things from a file header record into a "struct stat".
 * Also set "*stdp" to !=0 or ==0 depending whether header record is "Unix
 * Standard" tar format or regular old tar format.
 *
 * read_header() has already decoded the checksum and length, so we don't.
 *
 * If wantug != 0, we want the uid/group info decoded from Unix Standard
 * tapes (for extraction).  If == 0, we are just printing anyway, so save time.
 */
decode_header(header, st, stdp, wantug)
	register union record	*header;
	register struct stat	*st;
	int	*stdp;
	int	wantug;
{

	st->st_mode = from_oct(8,  header->header.mode);
	st->st_mtime = from_oct(1+12, header->header.mtime);
	
	if (0==strcmp(header->header.magic, TMAGIC)) {
		/* Unix Standard tar archive */
		*stdp = 1;
		if (wantug) {
			st->st_uid = finduid(header->header.uname);
			st->st_gid = findgid(header->header.gname);
		}
		switch  (header->header.linkflag) 
		case LF_BLK: case LF_CHR:
		    st->st_dev = makedev(from_oct(8, header->header.devmajor),
			 		 from_oct(8, header->header.devminor));
	} else {
		/* Old fashioned tar archive */
		*stdp = 0;
		st->st_uid = from_oct(8,  header->header.uid);
		st->st_gid = from_oct(8,  header->header.gid);
		st->st_dev = 0;
	}
}


/*
 * Quick and dirty octal conversion.
 *
 * Result is -1 if the field is invalid (all blank, or nonoctal).
 */
long
from_oct(digs, where)
	register int	digs;
	register char	*where;
{
	register long	value;

	while (isspace(*where)) {		/* Skip spaces */
		where++;
		if (--digs <= 0)
			return -1;		/* All blank field */
	}
	value = 0;
	while (digs > 0 && isodigit(*where)) {	/* Scan til nonoctal */
		value = (value << 3) | (*where++ - '0');
		--digs;
	}

	if (digs > 0 && *where && !isspace(*where))
		return -1;			/* Ended on non-space/nul */

	return value;
}


/*
 * Actually print it.
 */
#define	UGSWIDTH	11		/* min width of User, group, size */
#define	DATEWIDTH	19		/* Last mod date */
static int	ugswidth = UGSWIDTH;	/* Max width encountered so far */

void
print_header()
{
	char modes[11];
	char *timestamp;
	char uform[11], gform[11];	/* These hold formatted ints */
	char *user, *group;
	char size[24];		/* Holds a formatted long or maj, min */
	long longie;		/* To make ctime() call portable */
	int	pad;
	int	header_std;	/* Is header standard or not? */

	annofile(stdout, (char *)NULL);

	if (f_verbose) {
		decode_header(head, hstat, &header_std, 0);

		/* File type and modes */
		modes[0] = '?';
		switch (head->header.linkflag) {
		case LF_NORMAL:
		case LF_OLDNORMAL:
		case LF_LINK:
				modes[0] = '-'; 
				if ('/' == head->header.name[strlen(head->header.name)-1])
					modes[0] = 'd';
				break;
		case LF_DIR:	modes[0] = 'd'; break;
		case LF_SYMLINK:modes[0] = 'l'; break;
		case LF_BLK:	modes[0] = 'b'; break;
		case LF_CHR:	modes[0] = 'c'; break;
		case LF_FIFO:	modes[0] = 'f'; break;
		case LF_CONTIG:	modes[0] = '='; break;
		}

		demode((unsigned)hstat->st_mode, modes+1);

		/* Timestamp */
		longie = hstat->st_mtime;
		timestamp = ctime(&longie);
		timestamp[16] = '\0';
		timestamp[24] = '\0';

		/* User and group names */
		if (*head->header.uname && header_std) {
			user  = head->header.uname;
		} else {
			user = uform;
			(void)sprintf(uform, "%d", (int)hstat->st_uid);
		}
		if (*head->header.gname && header_std) {
			group = head->header.gname;
		} else {
			group = gform;
			(void)sprintf(gform, "%d", (int)hstat->st_gid);
		}

		/* Format the file size or major/minor device numbers */
		switch (head->header.linkflag) {
		case LF_CHR:
		case LF_BLK:
			(void)sprintf(size, "%d, %d",
					major(hstat->st_dev),
					minor(hstat->st_dev));
			break;

		default:
			(void)sprintf(size, "%ld", (long)hstat->st_size);
		}

		/* Figure out padding and print the whole line. */
		pad = strlen(user) + strlen(group) + strlen(size) + 1;
		if (pad > ugswidth) ugswidth = pad;

		printf("%s %s/%s %*s%s %s %s %.*s",
			modes,
			user,
			group,
			ugswidth - pad,
			"",
			size,
			timestamp+4, timestamp+20,
			sizeof(head->header.name),
			head->header.name);
	} else {
		printf("%s", head->header.name);
	}

	if (f_verbose) switch (head->header.linkflag) {
	case LF_SYMLINK:
		printf(" -> %s\n", head->header.linkname);
		break;

	case LF_LINK:
		printf(" link to %s\n", head->header.linkname);
		break;

	default:
		printf(" unknown file type '%c'\n", head->header.linkflag);
		break;

	case LF_OLDNORMAL:
	case LF_NORMAL:
	case LF_CHR:
	case LF_BLK:
	case LF_DIR:
	case LF_FIFO:
	case LF_CONTIG:
		putc('\n', stdout);
		break;
	} else {
		putc('\n', stdout);
	}

	/* FIXME: we don't print major/minor device numbers */
}

/*
 * Print a similar line when we make a directory automatically.
 */
void
pr_mkdir(pathname, length, mode)
	char *pathname;
	int length;
	int mode;
{
	char modes[11];

	if (f_verbose) {
		/* File type and modes */
		modes[0] = 'd';
		demode((unsigned)mode, modes+1);

		annofile(stdout, (char *)NULL);
		printf("%s %*s %.*s\n",
			modes,
			ugswidth+DATEWIDTH,
			"Creating directory:",
			length,
			pathname);
	}
}


/*
 * Skip over <size> bytes of data in records in the archive.
 */
void
skip_file(size)
	register long size;
{
	union record *x;

	while (size > 0) {
		x = findrec();
		if (x == NULL) {	/* Check it... */
			annorec(stderr, tar);
			fprintf(stderr, "Unexpected EOF on archive file\n");
			exit(EX_BADARCH);
		}
		userec(x);
		size -= RECORDSIZE;
	}
}


/*
 * Decode the mode string from a stat entry into a 9-char string and a null.
 */
void
demode(mode, string)
	register unsigned mode;
	register char *string;
{
	register unsigned mask;
	register char *rwx = "rwxrwxrwx";

	for (mask = 0400; mask != 0; mask >>= 1) {
		if (mode & mask)
			*string++ = *rwx++;
		else {
			*string++ = '-';
			rwx++;
		}
	}

	if (mode & S_ISUID)
		if (string[-7] == 'x')
			string[-7] = 's';
		else
			string[-7] = 'S';
	if (mode & S_ISGID)
		if (string[-4] == 'x')
			string[-4] = 's';
		else
			string[-4] = 'S';
	if (mode & S_ISVTX)
		if (string[-1] == 'x')
			string[-1] = 't';
		else
			string[-1] = 'T';
	*string = '\0';
}
@@@ Fin de list.c
echo names.c 1>&2
cat >names.c <<'@@@ Fin de names.c'
/*
 * Look up user and/or group names.
 *
 * This file should be modified for non-unix systems to do something
 * reasonable.
 *
 * @(#)names.c 1.1 9/9/86 Public Domain - gnu
 */ 
#include <sys/types.h>
#include <pwd.h>
#include <grp.h>
#include "tar.h"

static int	saveuid = -993;
static char	saveuname[TUNMLEN];
static int	my_uid = -993;

static int	savegid = -993;
static char	savegname[TGNMLEN];
static int	my_gid = -993;

#define myuid	( my_uid < 0? my_uid = getuid(): my_uid )
#define	mygid	( my_gid < 0? my_gid = getgid(): my_gid )


#ifndef NONAMES
/*
 * Look up a user or group name from a uid/gid, maintaining a cache.
 * FIXME, for now it's a one-entry cache.
 * FIXME2, the "-993" is to reduce the chance of a hit on the first lookup.
 *
 * This is ifdef'd because on Suns, it drags in about 38K of "yellow
 * pages" code, roughly doubling the program size.  Thanks guys.
 */
void
finduname(uname, uid)
	char	uname[TUNMLEN];
	int	uid;
{
	struct passwd	*pw;
	extern struct passwd *getpwuid ();

	if (uid != saveuid) {
		saveuid = uid;
		saveuname[0] = '\0';
		pw = getpwuid(uid); 
		if (pw) 
			strncpy(saveuname, pw->pw_name, TUNMLEN);
	}
	strncpy(uname, saveuname, TUNMLEN);
}

int
finduid(uname)
	char	uname[TUNMLEN];
{
	struct passwd	*pw;
	extern struct passwd *getpwnam();

	if (uname[0] != saveuname[0]	/* Quick test w/o proc call */
	    || 0!=strncmp(uname, saveuname, TUNMLEN)) {
		strncpy(saveuname, uname, TUNMLEN);
		pw = getpwnam(uname); 
		if (pw) {
			saveuid = pw->pw_uid;
		} else {
			saveuid = myuid;
		}
	}
	return saveuid;
}


void
findgname(gname, gid)
	char	gname[TGNMLEN];
	int	gid;
{
	struct group	*gr;
	extern struct group *getgrgid ();

	if (gid != savegid) {
		savegid = gid;
		savegname[0] = '\0';
		(void)setgrent();
		gr = getgrgid(gid); 
		if (gr) 
			strncpy(savegname, gr->gr_name, TGNMLEN);
	}
	(void) strncpy(gname, savegname, TGNMLEN);
}


int
findgid(gname)
	char	gname[TUNMLEN];
{
	struct group	*gr;
	extern struct group *getgrnam();

	if (gname[0] != savegname[0]	/* Quick test w/o proc call */
	    || 0!=strncmp(gname, savegname, TUNMLEN)) {
		strncpy(savegname, gname, TUNMLEN);
		gr = getgrnam(gname); 
		if (gr) {
			savegid = gr->gr_gid;
		} else {
			savegid = mygid;
		}
	}
	return savegid;
}
#endif
@@@ Fin de names.c
echo port.c 1>&2
cat >port.c <<'@@@ Fin de port.c'
/*
 * @(#)port.c 1.6	86/08/11	Public Domain, by John Gilmore, 1986
 *
 * These are routines not available in all environments.
 *
 * I know this introduces an extra level of subroutine calls and is
 * slightly slower.  Frankly, my dear, I don't give a damn.  Let the
 * Missed-Em Vee losers suffer a little.  This software is proud to
 * have been written on a BSD system.
 */
#include <sys/types.h>
#include <sys/stat.h>
#include <signal.h>
#include <errno.h>

#include "port.h"

#ifndef BSD42
/*
 * lstat() is a stat() which does not follow symbolic links.
 * If there are no symbolic links, just use stat().
 */
int
lstat (path, buf)
	char *path;
	struct stat *buf;
{
	extern int stat ();
	return (stat (path, buf));
}

/*
 * valloc() does a malloc() on a page boundary.  On some systems,
 * this can make large block I/O more efficient.
 */
char *
valloc (size)
	unsigned size;
{
	extern char *malloc ();
	return (malloc (size));
}

/*
**				NMKDIR.C
**
** Written by Robert Rother, Mariah Corporation, August 1985. 
**
** I wrote this out of shear disgust with myself because I couldn't
** figure out how to do this in /bin/sh.
**
** If you want it, it's yours.  All I ask in return is that if you
** figure out how to do this in a Bourne Shell script you send me
** a copy.
**					sdcsvax!rmr or rmr at uscd
*
* Severely hacked over by John Gilmore to make a 4.2BSD compatible
* subroutine.	11Mar86; hoptoad!gnu
*/

/*
 * Make a directory.  Compatible with the mkdir() system call on 4.2BSD.
 */
int
mkdir(dpath, dmode)
	char *dpath;
	int dmode;
{
	int cpid, status;
	extern int errno;

	switch (cpid = fork()) {

	case -1:			/* Error in fork() */
		return(-1);		/* Errno is set already */

	case 0:				/* Child process */
		/*
		 * Cheap hack to set mode of new directory.  Since this
		 * child process is going away anyway, we zap its umask.
		 * FIXME, this won't suffice to set SUID, SGID, etc. on this
		 * directory.  Does anybody care?
		 */
		status = umask(0);	/* Get current umask */
		status = umask(status | (0777 & ~dmode)); /* Set for mkdir */
		execl("/bin/mkdir", "mkdir", dpath, (char *)0);
		_exit(-1);		/* Can't exec /bin/mkdir */
	
	default:			/* Parent process */
		while (cpid != wait(&status)) ;	/* Wait for kid to finish */
	}

	if (TERM_SIGNAL(status) != 0 || TERM_VALUE(status) != 0) {
		errno = EIO;		/* We don't know why, but */
		return -1;		/* /bin/mkdir failed */
	}

	return 0;
}
#endif

#ifdef USG
/*
 * Translate V7 style into Sys V style.
 */
#include <string.h>
#include <memory.h>

char *
index (s, c)
	char *s;
	int c;
{
	return (strchr (s, c));
}

char *
bcopy (s1, s2, n)
	char *s1, *s2;
	int n;
{
	(void) memcpy (s2, s1, n);
	return (s1);
}

void
bzero (s1, n)
	char *s1;
	int n;
{
	(void) memset(s1, 0, n);
}
#endif
@@@ Fin de port.c
exit 0



More information about the Mod.sources mailing list