Scantool part 4(5) (shar)

Was a Sunny day gunnar at falcon.ericsson.se
Tue Jun 18 22:49:09 AEST 1991


#!/bin/sh
# this is scan.04 (part 4 of a multipart archive)
# do not concatenate these parts, unpack them in order with /bin/sh
# file scan_extern.h continued
#
if test ! -r _shar_seq_.tmp; then
	echo 'Please unpack part 1 first!'
	exit 1
fi
(read Scheck
 if test "$Scheck" != 4; then
	echo Please unpack part "$Scheck" next!
	exit 1
 else
	exit 0
 fi
) < _shar_seq_.tmp || exit 1
if test ! -f _shar_wnt_.tmp; then
	echo 'x - still skipping scan_extern.h'
else
echo 'x - continuing file scan_extern.h'
sed 's/^X//' << 'SHAR_EOF' >> 'scan_extern.h' &&
X */
X
extern char finalimage[] ; /* Name of uncompressed image file. */
extern char line[] ;
extern char picname[] ;    /* Name of file for raster image. */
extern char progname[] ;   /* This programs name. */
extern char temphead[] ;   /* Temporary filename for header file. */
extern char tempimage[] ;  /* Temporary filename for saved scanned data. */
X
extern int finished ;      /* Indicates if we have finished uncompressing. */
extern int fwidth ;        /* Final width of rasterfile. */
extern int height ;        /* Height in scan lines of raster file image. */
extern int rc ;            /* Current character from scanned file. */
extern int rcount ;        /* Bit position count within read character. */
extern int wc ;            /* Current char to write to final image file. */
extern int wcount ;        /* Bit position count within write character. */
extern int width ;         /* Width in pixels of rasterfile image. */
X
extern struct code *whites[] ;  /* White initial starting pointers. */
extern struct code *blacks[] ;  /* Black initial starting pointers. */
X
extern FILE *rd ;          /* File descriptor for input files. */
extern FILE *wd ;          /* File descriptor for final image. */
SHAR_EOF
echo 'File scan_extern.h is complete' &&
chmod 0644 scan_extern.h ||
echo 'restore of scan_extern.h failed'
Wc_c="`wc -c < 'scan_extern.h'`"
test 1744 -eq "$Wc_c" ||
	echo 'scan_extern.h: original size 1744, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= scantool.1 ==============
if test -f 'scantool.1' -a X"$1" != X"-c"; then
	echo 'x - skipping scantool.1 (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting scantool.1 (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'scantool.1' &&
.\" @(#)scantool.1 1.3 90/04/04
.TH SCANTOOL 1L "2 April 1990"
.SH NAME
scantool \- a program to scan images using a Microtek MS300A scanner.
.SH SYNOPSIS
.B "scantool
[
.B -v
]
[
.B \-Wi
]
[
.B \-Wp
.I x y
]
[
.B \-WP
.I x y
]
.SH DESCRIPTION
.I Scantool
allows the user to scan in documents using a Microtek
MS300A scanner, and turn the resulting image into a Sun rasterfile.
This program uses either SunView or XView graphics. These graphics
routines are fairly trivial, and have been isolated into a single
file, so it would be relatively easy to write a set of graphics
routines for another graphics system.
.LP
When you run scantool, a window is displayed. There is a black bar
at the top with containing six headings. Hitting a mouse button when
the cursor is above one of those six headings, will display a popup
menu. These options are explained in more detail below, and also by
selecting entries from the Help popup menu.
.LP
There are also four box toggle switches. Each toggle has two settings.
There are toggles for setting the line mode,
data transfer method, serial port and baud rate.
.LP
There are three buttons. The Scan button initiates a scan. Should you
wish to cancel a scan once it has been started, then you should press 
the Canel button.
.LP
The Show button allows you to display the scanned rasterfile images in 
a separate window.
.SS "Display mode."
.LP
The scanner can handle input from the image sensor in
two modes: Line Art mode and Halftone mode. Line Art
mode produces an all black-and-white image, while
Halftone mode results in an image that appears to contain
varying shades of gray.
.LP
In Line Art mode, the amount of light falling on the
sensor is compared against a "threshold" determined by
the Brightness and Contrast controls. Whenever it falls
below the threshold, a black dot is sent to the Sun; when
it exceeds the threshold a white dot is sent. This mode
is normally used for material in which everything is
either black or white.
.LP
Halftone mode is used to detect and reproduce finer
differences in shading. In this mode the dots sent to
the Sun are organised into squares, or "grains", of
uniform size. By varying the ratio of black and white
dots in the grains, different degrees of shading, or
"gray levels", are achieved.
.SS "Data transfer."
.LP
In order to reduce the amount of time needed to
transmit a scanned image to the computer, the
MS-300A can compress image data using a one-
dimensional coding scheme based on CCITT
Recommendation T.4 (modified Huffman code). By default the scanner
will send compressed data to the computer.
.SS " Serial connection."
.LP
The scanner connects to the computer using an RS232 connection.
This is currently setup to allow you to select between the RS232
A and B ports.  The baud rate can also be toggled between 9600
and 1920 baud.
.SS "Brightness."
.LP
There are 14 Brightness levels to choose from. The
effect of this control depends on whether the image
is scanned in Line Art or Halftone mode.
.LP
In Line Art mode, the higher the Brightness setting
the darker a spot must be in order for the scanner to
consider it "black". Lower settings can therefore be
used to get a sharper image if the original is too
light or blurry, while higher settings can be used to
prevent slightly shaded areas from coming out black
in the scanned image.
.LP
In Halftone mode, the Brightness setting affects
shading in all areas of the scanned image, both dark
and light. The higher the value selected, the lighter
the overall image; the lower the setting, the darker image.
.SS "Contrast."
.LP
The Contrast control also has 14 different settings.
The effect of this control in Line Art mode is identical
to that of the Brightness control. In Halftone mode, a
higher Contrast setting causes all but the darkest areas
of the original document to come out lighter in the
scanned image. Too high a setting can result in "glare
spots" of pure white; too low a setting can make the
image almost uniformly gray.
.SS "Grain."
.LP
All the grains in any one halftone image are the same
size (see the Mode help). It is desirable, however, to
use different grain sizes for different kinds of images.
The Grain control makes it possible to do this. Six
different grain sizes are available: 2, 3, 4, 5, 6, and
8 dots square.
.LP
When smaller grain sizes (i.e. higher settings) are
used, fine details in the original document are captured
more clearly, but the smaller number of dot positions in
the grains limits the scanner's "palette" of gray levels.
A Grain setting of 11, for instance produces grains that
are 2 dots high by 2 dots wide. With only 4 dot positions
to fill, only 5 distinct gray levels are possible, from
all white to all black.
.SS "Resolution."
.LP
The Resolution control determines the degree of
reduction of the scanned image relative to the original.
Since the dots that make up the scanned image cannot be
reduced in size, reduction is achieved by deleting dots
at selected intervals when transmitting the image to
the Sun, resulting in an effective resolution of less
than the scanner's maximum of 300 dots per inch.
.LP
There are 16 possible Resolution settings, providing
scaling operations from 25% to 100%.
.SS "Setting the picture name."
.LP
There are various options that can be set via the Set popup menu.
One of these is the picture name. This is the name of the file on 
the Sun that the scanned picture will be saved in. The default is 
a file called "Noname.rf".
.SS "Setting the scaning frame."
.LP
The frame is the area to be scanned. Scantool allows
you to scan an area as small as 1/8" x 1/8", or as large
as 8.5" x 11". Using the Set Scanning Frame function in
the Set menu, you can adjust the size and location of
the frame in order to scan any part of the document that
you feed into the scanner.
.SS "Initiating a scan."
.LP
When you click the Scan button, scantool checks
to see if the scanner is on line, i.e. powered up,
properly connected and ready to receive commands.
.LP
If everything checks out OK, the current settings
will be transmitted to the scanner, and the rollers
will begin to turn. Actual scanning will begin after
a document is detected by the paper sensor, which is
located in the middle of the feed slot just below
the top rollers.
.SH OPTIONS
.TP
.B \-v
Print the version number of this release of the scantool program.
.TP
.B \-Wi
Start the
.B scantool
program up in iconic form.
.TP
.BI \-Wp " x y"
Start the open window position at
.I x y
.TP 
.BI \-WP " x y"
Start the icon position at
.I x y
.SH FILES
.TP
/usr/local/lib/scantool/scantool.help
.SH AUTHOR
Rich Burridge,        Domain: richb at Aus.Sun.COM
.nf
PHONE: +61 2 413 2666   Path: {uunet,mcvax,ukc}!munnari!sunaus.oz!richb
.fi
SHAR_EOF
chmod 0644 scantool.1 ||
echo 'restore of scantool.1 failed'
Wc_c="`wc -c < 'scantool.1'`"
test 6726 -eq "$Wc_c" ||
	echo 'scantool.1: original size 6726, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= scantool.c ==============
if test -f 'scantool.c' -a X"$1" != X"-c"; then
	echo 'x - skipping scantool.c (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting scantool.c (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'scantool.c' &&
X
/*  @(#)scantool.c 1.4 90/04/04
X *
X *  Main routine for scantool, which will read a scanned image
X *  from a Microtek MS-300A scanner and convert it to a Sun rasterfile.
X *
X *  Copyright (c) Rich Burridge.
X *                Sun Microsystems, Australia - All rights reserved.
X *
X *  Permission is given to distribute these sources, as long as the
X *  copyright messages are not removed, and no monies are exchanged.
X *
X *  No responsibility is taken for any errors or inaccuracies inherent
X *  either to the comments or the code of this program, but if
X *  reported to me, then an attempt will be made to fix them.
X */
X
#include <stdio.h>
#include <strings.h>
#include "scantool.h"
X
char *br_strs[] = {     /* Brightness menu item strings. */
X       "1   -24% Darker",
X       "2   -20% Darker",
X       "3   -16% Darker",
X       "4   -12% Darker",
X       "5   -8%  Darker",
X       "6   -4%  Darker",
X       "7   No adjustment",
X       "8   +4%  Lighter",
X       "9   +8%  Lighter",
X       "10  +12% Lighter",
X       "11  +16% Lighter",
X       "12  +20% Lighter",
X       "13  +24% Lighter",
X       "14  +28% Lighter",
X       NULL
} ;
X
char *con_strs[] = {    /* Contrast menu item strings. */
X       "1   -24% Lower",
X       "2   -20% Lower",
X       "3   -16% Lower",
X       "4   -12% Lower",
X       "5   -8%  Lower",
X       "6   -4%  Lower",
X       "7   No adjustment",
X       "8   +4%  Higher",
X       "9   +8%  Higher",
X       "10  +12% Higher",
X       "11  +16% Higher",
X       "12  +20% Higher",
X       "13  +24% Higher",
X       "14  +28% Higher",
X       NULL
} ;
X
char *gr_strs[] = {      /* Grain menu item strings. */
X       "0   Grain Size: 8x8   Gray Levels: 33",
X       "1   Grain Size: 8x8   Gray Levels: 33",
X       "2   Grain Size: 8x8   Gray Levels: 33",
X       "3   Grain Size: 8x8   Gray Levels: 33",
X       "4   Grain Size: 6x6   Gray Levels: 37",
X       "5   Grain Size: 5x5   Gray Levels: 26",
X       "6   Grain Size: 5x5   Gray Levels: 18",
X       "7   Grain Size: 4x4   Gray Levels: 17",
X       "8   Grain Size: 4x4   Gray Levels: 17",
X       "9   Grain Size: 4x4   Gray Levels: 17",
X       "10  Grain Size: 3x3   Gray Levels: 10",
X       "11  Grain Size: 2x2   Gray Levels: 5",
X       NULL
} ;
X
char *help_strs[] = {   /* Help menu item strings. */
X       "Brightness",
X       "Contrast",
X       "Frame",
X       "Grain",
X       "Mode",
X       "Resolution",
X       "Scan",
X       "Compress",
X       "Port",
X       "Speed",
X       "Picture",
X       NULL
} ;
X
char *res_strs[] = {     /* Resolution menu item strings. */
X       "0   300 dpi  Scale: Full size",
X       "1   285 dpi  Scale: 95%",
X       "2   270 dpi  Scale: 90%",
X       "3   255 dpi  Scale: 85%",
X       "4   240 dpi  Scale: 80%",
X       "5   225 dpi  Scale: 75%",
X       "6   210 dpi  Scale: 70%",
X       "7   200 dpi  Scale: 66%",
X       "8   180 dpi  Scale: 60%",
X       "9   165 dpi  Scale: 55%",
X       "10  150 dpi  Scale: 50%",
X       "11  135 dpi  Scale: 45%",
X       "12  120 dpi  Scale: 40%",
X       "13  100 dpi  Scale: 33%",
X       "14   90 dpi  Scale: 30%",
X       "15   75 dpi  Scale: 25%",
X       NULL
} ;
X
char *set_strs[] = {      /* Set menu item strings. */
X       "Picture Name",
X       "Default Settings",
X       "Clear Scanning Frame",
X       "New Scanning Frame",
X       "Show Current Settings",
X       NULL
} ;
X
char helpname[MAXLINE] ;      /* Current help file to display. */
char last_message[MAXLINE] ;  /* Last message that was make_displayed. */
char old_picname[MAXLINE] ;   /* Previous picture name. */
char output[MAXLINE] ;        /* Panel_set string to be output. */
char picname[MAXLINE] ;       /* Name of file for raster image. */
char progname[MAXLINE] ;      /* Name of this program. */
X
int ops[MAXOPS] ;             /* Rasterop functions. */
X
int switches[4] =
X      {
X        0,                    /* Mode (Line Art). */
X        1,                    /* Data Transfer (Compressed). */
X        0,                    /* Serial Port (A). */
X        1                     /* Baud Rate (19200). */
X      } ;
X
int framevals[4] =            /* Initial frame in 1/8th inch intervals. */
X      {
X        16,                   /* X1. */
X        16,                   /* Y1. */
X        48,                   /* X2. */
X        48,                   /* Y2. */
X     } ;
X
int butx ;                    /* Top left X position of popup button. */
int buty ;                    /* Top left Y position of popup button. */
int cur_ch ;                  /* Last keyboard character pressed. */
int curx ;                    /* Current X position of the mouse. */
int cury ;                    /* Current Y position of the mouse. */
int font_width ;              /* Width of a single character. */
int nohelp = 0 ;              /* Indicates if a help file was found. */
int pid ;                     /* Process id of the child scan process. */
int scanning = 0 ;            /* Set if we are in the middle of a scan. */
int showing = 0 ;             /* Set if we are in the middle of a show. */
int type ;                    /* Current pseudo event type. */
int width ;                   /* Width in pixels of scantool window. */
X
/* Cyclic switches. */
int brightness ;              /* Brightness value. */
int contrast ;                /* Contrast value. */
int grain ;                   /* Grain value. */
int resolution ;              /* Resolution value. */
X
enum draw_type drawstate ;    /* Current action if a redraw is needed. */
X
FILE *hfd ;                   /* File descriptor for help file. */
X
X
main(argc, argv)
int argc ;
char *argv[] ;
{
X  STRCPY(progname, argv[0]) ;      /* Save program name. */
X  get_options(argc, argv) ;        /* Extract command line options. */
X  init_ws_type() ;                 /* Setup pseudo rasterop functions. */
X  drawstate = DO_NOTHING ;         /* No popups currently displayed. */
X  if ((hfd = fopen(HELPNAME, "r")) == NULL)
X    {
X      FPRINTF(stderr, "Help file %s not found\r\n", HELPNAME) ;
X      nohelp = 1 ;
X    }
X
X  STRCPY(picname, "/home1/falcon/gunnar/scan.rf") ;
X  set_defaults() ;                /* Set scanner settings to default. */
X  make_frames(argc, argv) ;  /* Create main scantool frame and show window. */
X  make_subframes() ;         /* Create canvases for each window. */
X  init_fonts() ;             /* Open fonts used by scantool. */
X  make_menus() ;             /* Create scantool menubar pulldown menus. */
X  start_tool() ;             /* Fit window and wait for events. */
}
SHAR_EOF
chmod 0644 scantool.c ||
echo 'restore of scantool.c failed'
Wc_c="`wc -c < 'scantool.c'`"
test 6453 -eq "$Wc_c" ||
	echo 'scantool.c: original size 6453, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= scantool.h ==============
if test -f 'scantool.h' -a X"$1" != X"-c"; then
	echo 'x - skipping scantool.h (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting scantool.h (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'scantool.h' &&
X
/*  @(#)scantool.h 1.4 90/04/04
X *
X *  Definitions used by scantool.
X *
X *  Copyright (c) Rich Burridge.
X *                Sun Microsystems, Australia - All rights reserved.
X *
X *  Permission is given to distribute these sources, as long as the
X *  copyright messages are not removed, and no monies are exchanged.
X *
X *  No responsibility is taken for any errors or inaccuracies inherent
X *  either to the comments or the code of this program, but if
X *  reported to me, then an attempt will be made to fix them.
X */
X
#define  CLOSE       (void) close      /* To make lint happy. */
#define  EXECL       (void) execl
#define  FGETS       (void) fgets
#define  FPRINTF     (void) fprintf
#define  KILL        (void) kill
#define  READ        (void) read
#define  SPRINTF     (void) sprintf
#define  STRCPY      (void) strcpy
#define  STRNCAT     (void) strncat
#define  STRNCPY     (void) strncpy
X
#define  BUTTON_HEIGHT  28        /* Height of a command button in pixels. */
#define  BUTTON_WIDTH   64        /* Width of a command button in pixels. */
#define  EQUAL          !strcmp   /* For character comparisons. */
#define  FONT_HEIGHT    14        /* Dimensions of the character fonts used. */
#define  FRAMEGAP       LINEGAP / 2       /* Scanning frame interval. */
X
#ifndef  HELPNAME
#define  HELPNAME       "scantool.help"   /* Name of scantool help file. */
#endif /*HELPNAME*/
X
#define  INC            argc-- ; argv++ ;
#define  LINEGAP        10      /* Gap between lines in scanning frame. */
#define  MAXCURSORS     4       /* Maximum number of cursors used. */
#define  MAXFONTS       2       /* Maximum number of fonts used. */
#define  MAXIMAGES      5       /* Maximum number of graphics images. */
#define  MAXLINE        80      /* Length of character strings. */
#define  MAXMENUS       6       /* Maximum number of popup menus. */
#define  MAXOPS         6       /* Number of pseudo rasterop functions. */
#define  MBAR_HEIGHT    20      /* Height of the top menu bar. */
#define  MBAR_WIDTH     100     /* Width of a portion of the top menu bar. */
#define  OFF            0       /* Used to define toggle switch positions. */
#define  ON             1
#define  SCAN_FRAME_X   26      /* Initial start position of scanning frame. */
#define  SCAN_FRAME_Y   47
#define  SCAN_HEIGHT    506     /* Height of the scantool window. */
#define  SCAN_WIDTH     600     /* Width of the scantool window. */
#define  SWITCH_HEIGHT  90      /* Height of a toggle box switch. */
X
#define  X1             0       /* Coordinate values within framevals. */
#define  Y1             1
#define  X2             2
#define  Y2             3
X
#define  OK             1       /* Text button states. */
#define  CANCEL         0
X
#define  BACKSPACE      8       /* Used for filename construction. */
#define  DEL            127
#define  LINEFEED       13
#define  RETURN         10
X
/* Pseudo events generated by scantool. */
#define  LEFT_DOWN         0    /* Left mouse button was depressed. */
#define  LEFT_UP           1    /* Left mouse button was debounced. */
#define  MIDDLE_DOWN       2    /* Middle mouse button was depressed. */
#define  MIDDLE_UP         3    /* Middle mouse button was debounced. */
#define  RIGHT_DOWN        4    /* Right mouse button was depressed. */
#define  RIGHT_UP          5    /* Right mouse button was debounced. */
#define  KEYBOARD          6    /* A keyboard key has been pressed. */
#define  REPAINT           7    /* Scantool canvas needs repainting. */
#define  MOUSE_MOVE        8    /* The mouse is being moved. */
#define  MOUSE_DRAG        9    /* The mouse is being dragged. */
#define  IGNORE            10   /* Not interested in this event. */
X
/* Abbreviations for box switch values. */
#define  MODE              switches[0]
#define  DATA_TRANSFER     switches[1]
#define  SERIAL_PORT       switches[2]
#define  BAUD_RATE         switches[3]
X
#define  SET_PICTURE      1     /* Values for the Set menu commands. */
#define  SET_DEFAULTS     2
#define  SET_CLEAR_FRAME  3
#define  SET_NEW_FRAME    4
#define  SET_CURRENT      5
X
/* Cursor types used by scantool. */
enum cur_type { FRAME_CUR, HELP_CUR, HOUR_CUR, MAIN_CUR } ;
X
/* States that the drawing canvas can be in. */
enum draw_type { DO_NOTHING, DO_PICNAME, DO_MESSAGE, DO_HELP, DO_SETTINGS } ;
X
enum font_type { BFONT, NFONT } ;          /* Fonts used by scantool. */
X
/* Various images types used by scantool. */
enum image_type { B_NORMAL, B_INVERT, S_NORMAL, S_INVERT,
X                  M_NORMAL, M_INVERT, EXCLAIM_IMAGE } ;
X
/* Menus used by scantool. */
enum menu_type { BRIGHTNESS_M, CONTRAST_M, GRAIN_M, HELP_M,
X                 RESOLUTION_M, SET_M, WINDOW_M } ;
X
/* Pseudo rasterop functions. */
enum op_type { GSET, GCLR, GXOR, GSRC, GOR, GNOT } ;
X
enum sten_type { STEN_OFF, STEN_ON, STEN_INV } ;   /* Text stencil types. */
X
#ifndef LINT_CAST
#ifdef lint
#define LINT_CAST(arg)  (arg ? 0 : 0)
#else
#define LINT_CAST(arg)  (arg)
#endif lint
#endif LINT_CAST
SHAR_EOF
chmod 0644 scantool.h ||
echo 'restore of scantool.h failed'
Wc_c="`wc -c < 'scantool.h'`"
test 4982 -eq "$Wc_c" ||
	echo 'scantool.h: original size 4982, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= scantool.help ==============
if test -f 'scantool.help' -a X"$1" != X"-c"; then
	echo 'x - skipping scantool.help (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting scantool.help (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'scantool.help' &&
%brightness%
X                   BRIGHTNESS.
X
X  There are 14 Brightness levels to choose from. The
effect of this control depends on whether the image
is scanned in Line Art or Halftone mode.
X
X  In Line Art mode, the higher the Brightness setting
the darker a spot must be in order for the scanner to
consider it "black". Lower settings can therefore be
used to get a sharper image if the original is too
light or blurry, while higher settings can be used to
prevent slightly shaded areas from coming out black
in the scanned image.
X
X  In Halftone mode, the Brightness setting affects
shading in all areas of the scanned image, both dark
and light. The higher the value selected, the lighter
the overall image; the lower the setting, the darker
image.
%%
X
%compress%
X                 COMPRESS.
X
X  In order to reduce the amount of time needed to
transmit a scanned image to the Sun computer, the
MS-300A can compress image data using a one-
dimensional coding scheme based on CCITT
Recommendation T.4 (modified Huffman code).
%%
X
%contrast%
X                    CONTRAST.
X
X  The Contrast control also has 14 different settings.
The effect of this control in Line Art mode is identical
to that of the Brightness control. In Halftone mode, a
higher Contrast setting causes all but the darkest areas
of the original document to come out lighter in the
scanned image. Too high a setting can result in "glare
spots" of pure white; too low a setting can make the
image almost uniformly gray.
%%
X
%frame%
X               SET SCANNING FRAME.
X
X  The frame is the area to be scanned. Scan Tool allows
you to scan an area as small as 1/8" x 1/8", or as large
as 8.5" x 11". Using the Set Scanning Frame function in
the Set menu, you can adjust the size and location of
the frame in order to scan any part of the document that
you feed into the scanner.
%%
X
%grain%
X                        GRAIN.
X
X  All the grains in any one halftone image are the same
size (see the Mode help). It is desirable, however, to
use different grain sizes for different kinds of images.
The Grain control makes it possible to do this. Six
different grain sizes are available: 2, 3, 4, 5, 6, and
8 dots square.
X
X  When smaller grain sizes (i.e. higher settings) are
used, fine details in the original document are captured
more clearly, but the smaller number of dot positions in
the grains limits the scanner's "palette" of gray levels.
A Grain setting of 11, for instance produces grains that
are 2 dots high by 2 dots wide. With only 4 dot positions
to fill, only 5 distinct gray levels are possible, from
all white to all black.
%%
X
%mode%
X                       MODE.
X
X  The scanner can handle input from the image sensor in
two modes: Line Art mode and Halftone mode. Line Art
mode produces an all black-and-white image, while
Halftone mode results in an image that appears to contain
varying shades of gray.
X
X  In Line Art mode, the amount of light falling on the
sensor is compared against a "threshold" determined by
the Brightness and Contrast controls. Whenever it falls
below the threshold, a black dot is sent to the Sun; when
it exceeds the threshold a white dot is sent. This mode
is normally used for material in which everything is
either black or white.
X
X  Halftone mode is used to detect and reproduce finer
differences in shading. In this mode the dots sent to
the Sun are organised into squares, or "grains", of
uniform size. By varying the ratio of black and white
dots in the grains, different degrees of shading, or
"gray levels", are achieved.
%%
X
%picture%
X                  PICTURE NAME.
X
X  This is the name of the file on the Sun that the
scanned picture will be saved in. The default is a
file called "Noname.rf".
%%
X
%port%
X                         PORT.
X
X  This is the RS232 port that is used to connect to
the scanner. Connect the MS300-A to the Sun as shown
below:
X
X         MS-300A                           SUN
X      ------------                     ----------
X    Pin No.    Name      Direction     Pin No.    Name
X   ---------  ------  --------------  ---------  ------
X       2       TXD    Scanner to Sun      3       RXD
X       3       RXD    Sun to scanner      2       TXD
X       7       GND        ---             7       GND
%%
X
%resolution%
X                    RESOLUTION.
X
X  The Resolution control determines the degree of
reduction of the scanned image relative to the original.
Since the dots that make up the scanned image cannot be
reduced in size, reduction is achieved by deleting dots
at selected intervals when transmitting the image to
the Sun, resulting in an effective resolution of less
than the scanner's maximum of 300 dots per inch.
X
X  There are 16 possible Resolution settings, providing
scaling operations from 25% to 100%.
%%
X
%scan%
X                     SCAN.
X
X  When you click the Scan button, scantool checks
to see if the scanner is on line, i.e. powered up,
properly connected and ready to receive commands.
X
X  If everything checks out OK, the current settings
will be transmitted to the scanner, and the rollers
will begin to turn. Actual scanning will begin after
a document is detected by the paper sensor, which is
located in the middle of the feed slot just below
the top rollers.
%%
X
%speed%
X                     SPEED.
X
X  Two speed settings between the scanner and the
Sun are available, either 9600 or 19200 baud.
%%
SHAR_EOF
chmod 0644 scantool.help ||
echo 'restore of scantool.help failed'
Wc_c="`wc -c < 'scantool.help'`"
test 5356 -eq "$Wc_c" ||
	echo 'scantool.help: original size 5356, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= scantool.icon ==============
if test -f 'scantool.icon' -a X"$1" != X"-c"; then
	echo 'x - skipping scantool.icon (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting scantool.icon (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'scantool.icon' &&
/* Format_version=1, Width=64, Height=64, Depth=1, Valid_bits_per_item=16
X */
X	0xFFFF,0xFFFF,0xFFFF,0xFFFF,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x83E0,0x0000,0x0000,0x0001,0x8630,0x0000,0x0000,0x0001,
X	0x8630,0x0000,0x0000,0x0001,0x8301,0xF0F0,0xBC00,0x0001,
X	0x81C3,0x1998,0xE600,0x0001,0x8063,0x0018,0xC600,0x0001,
X	0x8033,0x00F8,0xC600,0x0001,0x8633,0x0198,0xC600,0x0001,
X	0x8633,0x1998,0xC600,0x0001,0x83E1,0xF0FC,0xC600,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8FFF,0xFFFF,0xFFFF,0xFFF1,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8FFF,0xFFFF,0xFFFF,0xFFF1,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8FFF,0xFFFF,0xFFFF,0xFFF1,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8FFF,0xFFFF,0xFFFF,0xFFF1,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8FFF,0xFFFF,0xFFFF,0xFFF1,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8FF0,0x0000,0x7800,0x0001,0x8180,0x0000,0x1800,0x0001,
X	0x8180,0x0000,0x1800,0x0001,0x8181,0xF0F8,0x1800,0x0001,
X	0x8183,0x198C,0x1800,0x0001,0x8183,0x198C,0x1800,0x0001,
X	0x8183,0x198C,0x1800,0x0001,0x8183,0x198C,0x1800,0x0001,
X	0x8183,0x198C,0x1800,0x0001,0x8181,0xF0F8,0x1800,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0x8000,0x0000,0x0000,0x0001,
X	0x8000,0x0000,0x0000,0x0001,0xFFFF,0xFFFF,0xFFFF,0xFFFF
SHAR_EOF
chmod 0644 scantool.icon ||
echo 'restore of scantool.icon failed'
Wc_c="`wc -c < 'scantool.icon'`"
test 1933 -eq "$Wc_c" ||
	echo 'scantool.icon: original size 1933, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= scantool_extern.h ==============
if test -f 'scantool_extern.h' -a X"$1" != X"-c"; then
	echo 'x - skipping scantool_extern.h (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting scantool_extern.h (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'scantool_extern.h' &&
X
/*  @(#)scantool_extern.h 1.4 90/04/04
X *
X *  External variables used by the scantool routines.
X *
X *  Copyright (c) Rich Burridge.
X *                Sun Microsystems, Australia - All rights reserved.
X *
X *  Permission is given to distribute these sources, as long as the
X *  copyright messages are not removed, and no monies are exchanged.
X *
X *  No responsibility is taken for any errors or inaccuracies inherent
X *  either to the comments or the code of this program, but if
X *  reported to me, then an attempt will be made to fix them.
X */
X
extern char *br_strs[] ;       /* Brightness menu item strings. */
extern char *con_strs[] ;      /* Contrast menu item strings. */
extern char *gr_strs[] ;       /* Grain menu item strings. */
extern char helpname[] ;       /* Current help file to display. */
extern char *help_strs[] ;     /* Help menu item strings. */
extern char last_message[] ;   /* Last make_displayed message. */
extern char old_picname[] ;    /* Previous picture name. */
extern char output[] ;         /* Panel_set string to be output. */
extern char picname[] ;        /* Name of file for raster image. */
extern char progname[] ;       /* This programs name. */
extern char *res_strs[] ;      /* Resolution menu item strings. */
extern char *set_strs[] ;      /* Set menu item strings. */
X
extern int brightness ;   /* Brightness value. */
extern int butx ;         /* Top left X position of popup button. */
extern int buty ;         /* Top left Y position of popup button. */
extern int contrast ;     /* Contrast value. */
extern int cur_ch ;       /* Last keyboard character pressed. */
extern int curx ;         /* Current X position of the mouse. */
extern int cury ;         /* Current Y position of the mouse. */
extern int font_width ;   /* Width of a single character. */
extern int framevals[] ;  /* Initial frame in 1/8th inch intervals. */
extern int grain ;        /* Grain value. */
extern int nohelp ;       /* Indicates if a help file was found. */
extern int ops[] ;        /* Pseudo rasterop functions. */
extern int pid ;          /* Process id of the child scan process. */
extern int resolution ;   /* Resolution value. */
extern int scanning ;     /* Set if we are in the middle of a scan. */
extern int showing ;      /* Set if we are in the middle of a show. */
extern int switches[] ;
extern int type ;         /* Current pseudo event type. */
extern int width ;        /* Width in pixels of scantool window. */
X
extern FILE *hfd ;        /* File descriptor for help file. */
X
extern enum draw_type drawstate ;  /* Current redraw action. */
X
SHAR_EOF
chmod 0644 scantool_extern.h ||
echo 'restore of scantool_extern.h failed'
Wc_c="`wc -c < 'scantool_extern.h'`"
test 2593 -eq "$Wc_c" ||
	echo 'scantool_extern.h: original size 2593, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
# ============= sunview.c ==============
if test -f 'sunview.c' -a X"$1" != X"-c"; then
	echo 'x - skipping sunview.c (File already exists)'
	rm -f _shar_wnt_.tmp
else
> _shar_wnt_.tmp
echo 'x - extracting sunview.c (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'sunview.c' &&
X 
/*  @(#)sunview.c 1.4 90/04/04
X *
X *  SunView dependent graphics routines used by scantool.
X *
X *  Copyright (c) Rich Burridge.
X *                Sun Microsystems, Australia - All rights reserved.
X *
X *  Permission is given to distribute these sources, as long as the
X *  copyright messages are not removed, and no monies are exchanged.
X *
X *  No responsibility is taken for any errors or inaccuracies inherent
X *  either to the comments or the code of this program, but if
X *  reported to me, then an attempt will be made to fix them.
X */
X
#include <stdio.h>
#include <sys/fcntl.h>
#include <sys/wait.h>
#include <sys/time.h>
#include <sys/resource.h>
#include "scantool.h"
#include "images.h"
#include "scantool_extern.h"
#include <suntool/sunview.h>
#include <suntool/canvas.h>
X
#define  MENU_SET                       (void) menu_set
#define  NOTIFY_DISPATCH                (void) notify_dispatch
#define  NOTIFY_INTERPOSE_DESTROY_FUNC  (void) notify_interpose_destroy_func
#define  NOTIFY_INTERPOSE_EVENT_FUNC    (void) notify_interpose_event_func
#define  NOTIFY_SET_WAIT3_FUNC          (void) notify_set_wait3_func
#define  PR_DESTROY                     (void) pr_destroy
#define  PW_REPLROP                     (void) pw_replrop
#define  PW_ROP                         (void) pw_rop
#define  PW_TEXT                        (void) pw_text
#define  PW_TTEXT                       (void) pw_ttext
#define  PW_VECTOR                      (void) pw_vector
#define  PW_WRITEBACKGROUND             (void) pw_writebackground
#define  WINDOW_READ_EVENT              (void) window_read_event
#define  WINDOW_SET                     (void) window_set
X
/* Fonts used by scantool. */
#define  BOLD_FONT      "/usr/lib/fonts/fixedwidthfonts/screen.b.14"
#define  NORMAL_FONT    "/usr/lib/fonts/fixedwidthfonts/screen.r.14"
X
struct pixfont *open_font() ;
void repaint_show_canvas() ;
X
Canvas canvas, show_canvas ;
Cursor cursor[MAXCURSORS] ;
Event *cur_event ;
Frame base_frame, show_frame ;
Icon scantool_icon ;
Menu menus[MAXMENUS] ;
Notify_value destroy(), handle_resize() ;
Pixfont *font[MAXFONTS] ;
Pixrect *images[MAXIMAGES] ;
Pixrect *spr ;
Pixwin *spw, *wpw ;
X
int firsttime ;      /* Set if we haven't resized the window yet. */
int init_height ;    /* Initial height of the scantool window. */
int init_width ;     /* Initial width of the scantool window. */
X
struct rasterfile hdr ;
X
mpr_static(grey_pr,          16, 16, 1, grey_image) ;
mpr_static(icon_pr,          64, 64, 1, icon_image) ;
mpr_static(exclaim_pr,       64, 64, 1, exclaim_image) ;
mpr_static(button_normal_pr, 64, 64, 1, button_normal_image) ;
mpr_static(button_invert_pr, 64, 64, 1, button_invert_image) ;
mpr_static(switch_normal_pr, 16, 16, 1, switch_normal_image) ;
mpr_static(switch_invert_pr, 16, 16, 1, switch_invert_image) ;
mpr_static(main_cursor_pr,   16, 16, 1, main_cursor_array) ;
mpr_static(hour_cursor_pr,   16, 16, 1, hour_cursor_array) ;
mpr_static(help_cursor_pr,   16, 16, 1, help_cursor_array) ;
mpr_static(frame_cursor_pr,  16, 16, 1, frame_cursor_array) ;
X 
X
/*ARGSUSED*/
void
canvas_proc(canvas, event)
Canvas canvas ;
Event *event ;
{
X  cur_event = event ;
X  handle_event() ;       /* Determine what kind of event it is. */
X  process_event() ;      /* And process it. */
}
X
create_menu(mtype, title, values)    /* Create popup menus for cycle items. */
enum menu_type mtype ;
char *title, *values[] ;
{
X  int i = 0 ;
X  int more = 1 ;   /* Cleared when current menu is complete.*/
X
X  menus[(int) mtype] = menu_create(MENU_TITLE_ITEM, title,
X                                   MENU_FONT,       font[(int) NFONT],
X                                   0) ;
X  do
X    {
X      if (values[i] != NULL)
X        MENU_SET(menus[(int) mtype], MENU_STRING_ITEM, values[i], i+1, 0) ;
X      else more = 0 ;
X      i++ ;
X    }
X  while (more) ;
}
X
/*ARGSUSED*/
Notify_value
destroy(client, status)
Notify_client client ;
Destroy_status status ;
{
X  stop_scan() ;        /* Stop the current scan (if there is one). */
X  exit(0) ;
}
X
display_menu(menuno)
enum menu_type menuno ;
{
X  return((int) menu_show(menus[(int) menuno], canvas,
X                         canvas_window_event(canvas, cur_event), 0)) ;
}
X
draw_area(x, y, width, height, op)
int x, y, width, height ;
enum op_type op ;
{
X  PW_WRITEBACKGROUND(wpw, x, y, width, height, ops[(int) op]) ;
}
X
draw_image(x, y, width, height, image)
int x, y, width, height ;
enum image_type image ;
{
X  PW_ROP(wpw, x, y, width, height, PIX_SRC, images[(int) image], 0, 0) ;
}
X
draw_line(x1, y1, x2, y2, op)
int x1, y1, x2, y2 ;
enum op_type op ;
{
X  PW_VECTOR(wpw, x1, y1, x2, y2, ops[(int) op], 1) ;
}
X
draw_text(x, y, stencil, ftype, str)
int x, y ;
enum sten_type stencil ;
enum font_type ftype ;
char *str ;
{
X  switch (stencil)
X    {
X      case STEN_OFF : PW_TEXT(wpw,  x, y, PIX_SRC, font[(int) ftype], str) ;
X                      break ;
X      case STEN_ON  : PW_TTEXT(wpw, x, y, PIX_SET, font[(int) ftype], str) ;
X                      break ;
X      case STEN_INV : PW_TTEXT(wpw, x, y, PIX_CLR, font[(int) ftype], str) ;
X    }
}
X
get_event()       /* Get the next SunView event. */
{
X  WINDOW_READ_EVENT(canvas, cur_event) ;
}
X
get_strwidth(ftype, str)    /* Get width in pixels of string value. */
enum font_type ftype ;
char *str ;
{
X  struct pr_size size ;
X
X  size = pf_textwidth(strlen(str), font[(int) ftype], str) ;
X  return(size.x) ;
}
X
grey_area(x, y, width, height)
{
X  PW_REPLROP(wpw, x, y, width, height, PIX_SRC, &grey_pr, 0, 0) ;
}
X
handle_event()        /* Work out what kind of event this is. */
{
X  curx = event_x(cur_event) ;
X  cury = event_y(cur_event) ;
X  cur_ch = event_id(cur_event) ;
X
X  if (event_is_button(cur_event) && event_is_down(cur_event))
X    {
X           if (cur_ch == MS_LEFT)     type = LEFT_DOWN ;
X      else if (cur_ch == MS_MIDDLE)   type = MIDDLE_DOWN ;
X      else if (cur_ch == MS_RIGHT)    type = RIGHT_DOWN ;
X    }
X  else if (event_is_button(cur_event) && event_is_up(cur_event))
X    {
X           if (cur_ch == MS_LEFT)     type = LEFT_UP ;
X      else if (cur_ch == MS_MIDDLE)   type = MIDDLE_UP ;
X      else if (cur_ch == MS_RIGHT)    type = RIGHT_UP ;
X    }
X  else if (event_is_ascii(cur_event)) type = KEYBOARD ;
X  else if (cur_ch == LOC_MOVE)        type = MOUSE_MOVE ;
X  else if (cur_ch == LOC_DRAG)        type = MOUSE_DRAG ;
X  else if (cur_ch == WIN_REPAINT)     type = REPAINT ;
X  else                                type = IGNORE ;
}
X
Notify_value
handle_resize(frame, event, arg, type)
SHAR_EOF
true || echo 'restore of sunview.c failed'
fi
echo 'End of  part 4'
echo 'File sunview.c is continued in part 5'
echo 5 > _shar_seq_.tmp
exit 0



More information about the Alt.sources mailing list