Suggestions on placing a 3B2/300 into a Tower case.

[Joseph L. Wood, III]

The real problem with this is with the physical design of the
3B2/300 and 400 series processors.  In order to use them you
need access to all four sides of the processor.  The front
for the floppy and the tape drive; the left side for the on/off
switch; the rear for the power cable and the console I/O connectors
and the fans and the external disk cables; finally the right
hand side is where the standard I/O bus in accesses.  They finally got
it right with the 600 and later machines.

Joe Wood jlw at mtuxo.ATT.COM