3com ethernetcard + SCO TCP/IP

[Hidetoshi Shimizu]

In article <7947 at star.cs.vu.nl> rvdp at cs.vu.nl (=Ronald van der Pol) writes:

> Xref: jituha comp.unix.sysv386:1390 comp.dcom.lans:12626 comp.protocols.tcp-ip:13626
> Path: jituha!tkou02.enet.dec.com!shlump.nac.dec.com!bacchus.pa.dec.com!decwrl!uunet!mcsun!hp4nl!star.cs.vu.nl!rvdp
> From: rvdp at cs.vu.nl (=Ronald van der Pol)
> Newsgroups: comp.unix.sysv386,comp.dcom.lans,comp.protocols.tcp-ip
> Date: 13 Oct 90 22:07:52 GMT
> Sender: news at cs.vu.nl
> Lines: 10
>
>
> I have some problems with a 3COM 503 Ethernet card. It only
> seems to work with SCO UNIX 3.2.0 TCP/IP (Lachmann) when I
> use the default IRQ vector of 2. When I try to set the IRQ 
> to 5 it doesn't work (e.g. when I install the Unix e3B driver). 
> Should I use some additional (MS-DOS??) setup software? 
> (there is no interrupt conflict!)
>
> --
>		 Ronald van der Pol  <rvdp at cs.vu.nl>

You should use a EtherLink-II Diagnostic Software under the MS-DOS and setup 
Interrupt vector .
--
Hidetoshi Shimizu       Digital Equipment Corporation Japan 
Financial-2 EIC         Urbannet Ikebukuro bldg 3-16-3 Higashi Ikebukuro
                        Toshima-ku Tokyo 170