UUCP connection for Esix

[Bill Heiser]

In article <1677 at ulowell.ulowell.edu> mschedlb at hawk.ulowell.edu (Martin J. Schedlbauer) writes:
>Hello,
>
>I'm trying to setup a uucp connection for Esix Rev. D. I have a site
>that let's me feed and I followed the uucp installation instructions.
>However when I use Uutry to check the connection it fails at the login.

If you supply more info, one of us should be able to help.
Details, please, details!

>Also, I understand that Esix has problems running at 9600 baud and that
>FAS will solve it. My questions is: Where can I get FAS from Esix Rev. D
>from (ftp would be great).

I don't know where you heard that Esix has problems running at 9600 baud.
There is some Esix-bashing going on and I think it is unjustified.  Anyway,
I don't think this shows that Esix is having trouble at 9600 baud:

Remote     K-Bytes   K-Bytes   K-Bytes  Hours  Hours AvCPS AvCPS    #    #
SiteName      Recv      Xmit     Total   Recv   Xmit  Recv  Xmit Recv Xmit
-------- --------- --------- --------- ------ ------ ----- ----- ---- ----
world     7954.888   170.018  8124.906   1.73   0.03  1278  1667  310  174

Do you?

I am running Esix Rev D on a 386/25, 300meg SCSI disk, 8mb ram,
Adaptec 1542b SCSI host adapter, Telebit Trailblazer (and HST, etc)
modems, a generic 2-port serial card, and an AST 4-port (dumb) card.
I don't have a 16550 installed (yet), and am using the stock Esix
asy driver.

The one thing I will say is that with a dumb serial card, there IS a 
significant load placed on the system when doing high-speed transfers.

bill

-- 
home:	...!{uunet,bloom-beacon,esegue}!world!unixland!bill
	bill at unixland.uucp    Public Access Unix - Esix SYSVR3
508-655-3848(12/24)  508-651-8723(12/24/96-HST)  508-651-8733(12/24/96-PEP-V32)
other:	heiser at world.std.com