RTSFLOW/CTSFLOW (handshake) with TCP/IP (was: FAS 2.07 and TCP/IP)

[Bernhard Kroenung]

lwj at cs.kun.nl (Luc Rooijakkers) writes:

>horke at buchonia.rhoen.in-berlin.de (Bernhard Kroenung) writes:

>>Since I use TCP/IP with the FAS 2.07 the Hardware-Handshake won`t work ...
>>Has somebody made similar experiences ??

>Yes. Using SCO XENIX 2.3.2 with a working Trailblazer configuration with
>hardware handshake, we installed SCO TCP/IP 1.0.0. After that, the hardware
>handshake stopped working. That is, it is initially enabled (by the

It seems that there are problems with the kernel using an WD8003 with an
serial-card - Now I will try to use NS16550N - then the problem may be over ...
It works on 9600 Baud (send/receive) and up to 38400 Baud (send only) and with
only small files - the 16450N seems to be the Problem - not the FAS (which is
2.08beta at the moment) - I will try to get some 16550 and let you now ...

  Ciao
    Bernhard

P.S. 2.3.2 with Hardware-Handshaking without FAS is !NOT! possible !!!
-- 
Bernhard Kroenung, Bahnhofstr. 8, D-W6408 Ebersburg/Rhoen, Germany +49 6656 386
horke at buchonia.rhoen.in-berlin.de sysop at fulmin.zer.sub.org Kronung at DGIHRZ01.BIT