Dialcodes not working in SCO Xenix 2.3.x

[Jonathan Bayer]

While recently trying to use the Dialcodes part of UUCP on SCO Xenix, I
found that it doesn't work if you are using the SCO supplied dialers. 
Upon examining the sources I saw that there is no provision in them for
the dial codes.  It appears that when SCO decided to use their dialers
instead of the normal HDB they didn't implement the dialcodes source.

Upon examining a 2.2.3 system I saw that the dialers supplied there also
didn't have the necessary code.  I tried this using different dialers on
both systems.  I have included below the Systems entry, the Dialcodes
entry, and the results of the dial attempt.  SCO, any comments?

JB


Systems
-------

valinor Any ACU 19200 nyc5551212 - at -ogin:- at -ogin:- at -ogin: Uispi word: bayer



Dialcodes
---------

nyc	10652



./uutry valinor
---------------

./uucico -r1 -Svalinor  -x5 >/tmp/valinor 2>&1&
tail -f /tmp/valinor: press <DEL> to quit when done
fillFlds: entered
fillFlds: returning
conn(valinor)
Device Type ACU wanted
mlock tty1A succeeded
dialer args :/usr/lib/uucp/dialTBIT:-x5:/dev/tty1A:nyc12125551212:19200
dial: Bad phone number nyc12125551212
Forked 7840 Wait got 7840 Status 102000
could not connect (bad phone number)
mlock tty1A succeeded
dialer args :/usr/lib/uucp/dialTBIT:-x5:/dev/tty1A:nyc12125551212:19200
dial: Bad phone number nyc12125551212
Forked 7841 Wait got 7841 Status 102000
could not connect (bad phone number)
getto ret -1
Call Failed: EXECDIAL LOCAL FAILURE
exit code 101
Conversation Complete: Status FAILED


-- 
Jonathan Bayer			      Beware: The light at the end of the
Intelligent Software Products, Inc.	      tunnel may be an oncoming dragon
500 Oakwood Ave.				...uunet!ispi!root
Roselle Park, NJ   07204    (201) 245-5922    jbayer at ispi.UUCP