Panics and double panics.

[Dave Hammond]

In article <2599259F.31C0 at marob.masa.com> I wrote:
>The system will boot and operate normally for an indeterminate period of
>time, but will eventually panic [...]
>	Kernel Panic - Non-recoverable Kernel Page Fault.
>	Kernel Double Panic - Stack Fault.
> [...]
>10 bits of I/O address decoding
>Wed Dec 27 11:30:03
>
>device    address	vector	dma	comment
>----------------------------------------------------------------------------
>%fpu      -		35	-	type=80387
>%floppy   0x3F2-0x3F7	06	2	unit=0 type=96ds15
>%serial   0x3F8-0x3FF	04	-	unit=0 type=Standard nports=1
>%serial   0x2F8-0x2FF	03	-	unit=1 type=Standard nports=1
>%parallel 0x378-0x37A	07	-	unit=0
>%parallel 0x3BC-0x3BE	07	-	unit=1
>%tape     0x300-0x304	05	1	type=W
>Arnet Smartport with 8 ports on COM4
>%console  -		-	-	unit=mono type=2
>Wed Dec 27 11:30:04
>%disk     0x1F0-0x1F7	36	-	type=W0 unit=0 cyls=1224 hds=7 secs=36

A colleague has questioned the choice of DMA channel 1 for the tape
drive, to which I replied that the tape driver was installed by the
mkdev tape `auto-configure' option (leaving all parameters as zero).

Has anyone experienced problems using DMA channel 1 for a tape drive ?

Has anyone had problems with the `auto' option of mkdev tape ?

Might choice of DMA channel have any effect on the previously mentioned
kernel panics?

--
Dave Hammond
daveh at marob.masa.com
uunet!masa.com!marob!daveh